Motronic “Pieps 2” avalanche beacon or transceiver. Orange plastic with metal parts. Labeled on side with “Pieps 2. Motronic. Made in Austria.” and instructions for use. Yellow fabric case with black cord marked “Pieps 2. Motronic. Canada.”
Motronic “Pieps 2” avalanche beacon or transceiver. Orange plastic with metal parts. Labeled on side with “Pieps 2. Motronic. Made in Austria.” and instructions for use. Yellow fabric case with black cord marked “Pieps 2. Motronic. Canada.”
Typical ice axe, pointed pick, curved adze and square pointed spike. Pick head 25.3 long, adze 5.5 wide. Wooden shaft inset into head, two 13.3 x 0.7 strips of the steel head extend up and nailed to shaft. 5.3 wide steel hand on end. Spike embedded in centre of end. Stamped on pick: "Tramcois …
Typical ice axe, pointed pick, curved adze and square pointed spike. Pick head 25.3 long, adze 5.5 wide. Wooden shaft inset into head, two 13.3 x 0.7 strips of the steel head extend up and nailed to shaft. 5.3 wide steel hand on end. Spike embedded in centre of end. Stamped on pick: "Tramcois Simon & FIS Chamony Mont-Blanc". Other side of pick: "Modele G.H.M. 3013". Thin leather thong is tied and wrapped to shaft.
Weathered, eroded shaft, pitted axe and spike. 5.4 cm long square spike embedded into end of shaft, 5.5 cm wide collar on end, one screw embedded. Copper coloured solder line is evident. Maker's insignia engraved on ace head "Fritz Derb Zweilutschinen Bernesoberland". Serrated edge worn down. …
Weathered, eroded shaft, pitted axe and spike. 5.4 cm long square spike embedded into end of shaft, 5.5 cm wide collar on end, one screw embedded. Copper coloured solder line is evident. Maker's insignia engraved on ace head "Fritz Derb Zweilutschinen Bernesoberland". Serrated edge worn down. Ace head has 2 long metal strips extending 14.2 cm up shaft with 2 copper nails each side. Single nail embedded in shaft near head.
Various woods and axe heads, some with name plates. (a) 96.0x27.0, A.O. Wheeler (b) 103.8x28.5, Mrs. Arthur O. Wheeler (c) 99.0x26.9 Benjamin Frank Seaver A.C.C. (d) 95.7x28.8 A.H. MacC (e) 95.8x23.4 H.E. Sampson (f) 110.7x30.5 GHR Kaufman (g) 114.5x26.0 C.E.F. (h) 91.5x25.0 C.P.R. (i) 85.5x26.7 Arthur Beale.
Two long handled ice axes with spikes, other wooden end. (a) 139.0x32.0, fine serrated inside edge on pick, rounded spike 20.0 cm long (b) 131.5x21.8, rounded handle wider at spike end (c) 84.7x25.0, ordinary axe handle (no spike) horseshoe nails used as wedges on ace head.
Two long handled ice axes with spikes, other wooden end. (a) 139.0x32.0, fine serrated inside edge on pick, rounded spike 20.0 cm long (b) 131.5x21.8, rounded handle wider at spike end (c) 84.7x25.0, ordinary axe handle (no spike) horseshoe nails used as wedges on ace head.
Typical ice axe with cast iron head, point one end and blade on the other. Bottom has an iron point ca. 6.0 long, 13.0 in all with other as sleeve to attach to wooden shaft. Wooden shaft is weathered to a grey colour. The axe is heavier than usual. Stamped on side of head: "Hill & Son 4 Haym…
Typical ice axe with cast iron head, point one end and blade on the other. Bottom has an iron point ca. 6.0 long, 13.0 in all with other as sleeve to attach to wooden shaft. Wooden shaft is weathered to a grey colour. The axe is heavier than usual. Stamped on side of head: "Hill & Son 4 Haymarket London".
Wooden handled ice axe. Handle inset into steel head, two extra pieces of steel extend 12.3 from head up shaft. Steel pick 15.6 long tapers from 0.5 wide to a point 0.2 wide. Stamped into pick: "Zermatt" and below to the right "Attenhofek, Zurich" . Steel collar and point at other end.
Wooden handled ice axe. Handle inset into steel head, two extra pieces of steel extend 12.3 from head up shaft. Steel pick 15.6 long tapers from 0.5 wide to a point 0.2 wide. Stamped into pick: "Zermatt" and below to the right "Attenhofek, Zurich" . Steel collar and point at other end.
Typical ice axe, stout wooden handle with axe one end and pick on the other. Manufacturer's logo stamped on ice axe head and no. 1048. Other side is stamped "F.H. Allen"
Typical ice axe, stout wooden handle with axe one end and pick on the other. Manufacturer's logo stamped on ice axe head and no. 1048. Other side is stamped "F.H. Allen"
Typical ice axe, extra long plain pick and dished spade. Engraved on side of pick "Cassin". Point is 10.0 long with 4.3 long solid point. Wooden handle is broken below head.
Typical ice axe, extra long plain pick and dished spade. Engraved on side of pick "Cassin". Point is 10.0 long with 4.3 long solid point. Wooden handle is broken below head.