Framed plaque, Mount Lougheed, steel plate 22.7 x 17.5 mounted on wood frame. Aluminum plate inscribed:"Alberta 75 1905 1980 Mount Lougheed In celebration of Alberta's 75th birthday and in honour of Sir James Lougheed (for whom the mountain is named) PremierPeter Lougheed climbed to the summit Aug…
Framed plaque, Mount Lougheed, steel plate 22.7 x 17.5 mounted on wood frame. Aluminum plate inscribed:"Alberta 75 1905 1980 Mount Lougheed In celebration of Alberta's 75th birthday and in honour of Sir James Lougheed (for whom the mountain is named) PremierPeter Lougheed climbed to the summit August, 1980. This plaque is placed with best wishes to the people of Alberta today and in the future. Peter, Jeanne,Steven, Andrea, Pam, Joe Lougheed August 1980"; small enamel crest of Alberta bottom right corner.
An abstract painting of the Spray Valley, town of Banff in the left centre foreground, Banff Springs Hotel near centre of picture. Deep green valley, snow covered mountains. Signed "P.M. Keefe"
An abstract painting of the Spray Valley, town of Banff in the left centre foreground, Banff Springs Hotel near centre of picture. Deep green valley, snow covered mountains. Signed "P.M. Keefe"
A dark grey metal avalanche probe held in a bright orange leather pouch with a metal clasp. The avalanche probe features 7 pieces connected via a cable that runs throughout the probe. One end of the probe has a lighter silver knob with tap near it. The other end has a brass-coloured metal end. The …
A dark grey metal avalanche probe held in a bright orange leather pouch with a metal clasp. The avalanche probe features 7 pieces connected via a cable that runs throughout the probe. One end of the probe has a lighter silver knob with tap near it. The other end has a brass-coloured metal end. The orange leather pouch features text along the middle on one side which reads “Lindenmann Lawinen-Sonde” and text at the top of the pouch which reads “SCOTT” in handwriting.
Two clear glass mugs, one large (14.0 cm high, 11.5 cm in diameter) and one small (7.0 cm high, 7.0 cm in diameter). “Banff Winter Festival” and logo in white on back and front of each mug.
Two clear glass mugs, one large (14.0 cm high, 11.5 cm in diameter) and one small (7.0 cm high, 7.0 cm in diameter). “Banff Winter Festival” and logo in white on back and front of each mug.
A pair of black leather touring boots (a=right, b=left), over ankle, Vibram-soled, grooved at the heel for a cable, five metal lace D-rings and two metal lace hooks at the top, sporting black laces. The tongue is leather-lined as well as the top of the boot, the insides have a soft fabric lining o…
A pair of black leather touring boots (a=right, b=left), over ankle, Vibram-soled, grooved at the heel for a cable, five metal lace D-rings and two metal lace hooks at the top, sporting black laces. The tongue is leather-lined as well as the top of the boot, the insides have a soft fabric lining over foam, blue fabric insoles, “MERRELL” on the top of the outside of the tongue, inside the the boot and the outside ankles “Men” underneath “MADE IN ITALY” and on the inside “101/2 687 M”. The soles are rubber; under the instep a cut-out section, painted yellow and imprinted with “vibram”; on top of this viewer’s left a “C” encircled, viewer’s right “R” encircled.
A pair of unlined black leather (a=right, b=left), over-ankle, well-worn, cross-country ski boots, with leather soles, a leather heel reinforced by rubber nailed onto the heel, seven grommeted eyelets with black laces and a leather loop pull-off above the heel on the back.
A pair of unlined black leather (a=right, b=left), over-ankle, well-worn, cross-country ski boots, with leather soles, a leather heel reinforced by rubber nailed onto the heel, seven grommeted eyelets with black laces and a leather loop pull-off above the heel on the back.
(a,b) a pair of black leather ski touring boots and a metal carrier; the boots have metal hooks for lace-up with brown leather laces; boots are over ankle, are thick soled, layered leather sole 3.30cm at heel, grooved at heel for cable, with layered sole sewn on and rubber sole glued on, heel naile…
(a,b) a pair of black leather ski touring boots and a metal carrier; the boots have metal hooks for lace-up with brown leather laces; boots are over ankle, are thick soled, layered leather sole 3.30cm at heel, grooved at heel for cable, with layered sole sewn on and rubber sole glued on, heel nailed on; unlined boot with a grey leather-lined inside liner with light blue faux leather (3.0cm) sewn on the top edge, foam underneath, and unlined tongue; there is also a narrow piece of blue leather at the top edge of the boots. There is a screwed-on metal toe plate and heel plate. On the inside edge of the layered sole 7.0cm from the heel a number “10” is carved. Inside the liner, right ankles stamped “MED” in red ink and on the left ankle a mountain (could be the logo), “ZIRI” “MADE IN YUGOSLAVIA” all stamped in red ink; it was also on the the left boot but is mostly worn off and is indiscernible.(c)The metal carrier is 40.0cm high and 16.0 wide with handle extended. The boots fit within two clamps and there is a handle for carrying. Engraved on both sides under the handle “TYROL” “BOOT PRESS”, “PAT PEND.”, “MADE IN CANADA”.
Three miniature wood spinning wheels:(a) a light brown varnished spinning wheel (24.5cmx10.0 wide) sitting on top of a round piece of wood with three splayed legs. There is a piece of string, simulating the driver band, around the fly wheel looping to the flyer whorl and a ball of spun linen with p…
Three miniature wood spinning wheels:(a) a light brown varnished spinning wheel (24.5cmx10.0 wide) sitting on top of a round piece of wood with three splayed legs. There is a piece of string, simulating the driver band, around the fly wheel looping to the flyer whorl and a ball of spun linen with part of it wrapped around the distaff. Printed on the bottom of the round piece of wood “MADE IN GERMANY (EAST)”(b) a delicate light brown varnished spinning wheel (15.0cmx15.5 wide) with all parts of a larger spinning wheel. There is a piece of string, simulating the driver band, around the fly wheel looping to the flyer whorl; to the left of the flyer whorl is the U-shaped flyer (the flyer is rotated by the drive band which as a result puts the twist in the fibre) and behind this the spindle. The spinning wheel sits on top of three splayed legs and there is a piece of wood across and diagonally for the treadle (the pedal that operates the wheel using your feet). Printed on the bottom “FAIT A LA MAIN PAR HENRI LEGAULT”(c) A sturdy dark brown stained upright spinning wheel (30.0cmx10.5 wide) sitting on top of a round piece of wood with three splayed legs; the treadle is connected by thin piece of metal that is attached to the footman, in turn attached to the handle and metal bar that goes through the centre of the wheel. There is a piece of red string, simulating the driver band, around the fly wheel, which is directly above, looping to the flyer whorl and some unspun linen wrapped around the distaff.
Two miniature gold-coloured four-poster metal beds covered with hand-woven cotton bedspreads both four-harness overshot:(a) The metal headboard measures 16.0cmx11.8cm wide and two posters on the foot measure 9.5 cmx11.8cm wide. The two metal slats on the frame have a mattress and a pillow (foam cov…
Two miniature gold-coloured four-poster metal beds covered with hand-woven cotton bedspreads both four-harness overshot:(a) The metal headboard measures 16.0cmx11.8cm wide and two posters on the foot measure 9.5 cmx11.8cm wide. The two metal slats on the frame have a mattress and a pillow (foam covered with white cotton cloth) covered with a blue and white patterned “cat’s tracks and snail’s trails” cotton woven bedspread. On the frame rung next to the foot of the bed there is a gold paper sticker with black lettering that reads ”MADE IN TAIWAN”.(b) The metal headboard measures 10.5cmx9.5cm wide and footboard measures 9.0cmx9.5 cm wide. The two metal slats on the frame have a support (paper and foam covered with pink, white and green flowers and pink and white patterned cotton cloth) and then two pieces of uncovered yellow foam on top of that; one for the mattress and a smaller one for the pillow. The cotton bedspread is woven in a brown and white pattern of wigrose design.
Rubber stamp with a brown rounded handle with a gold “MBE” symbol on the handle. The information on the rubber stamp denotes special handling specifications that can be seen on a vulcanized piece of rubber, which has been mounted to a stable wood block. The information appears backwards and reads:…
Rubber stamp with a brown rounded handle with a gold “MBE” symbol on the handle. The information on the rubber stamp denotes special handling specifications that can be seen on a vulcanized piece of rubber, which has been mounted to a stable wood block. The information appears backwards and reads: “PHOTOGRAPHY BY NICHOLAS MORANT” “THIS PICTURE MUST NOT BE COPIED, REPRODUCED NOR EXHIBITED WITHOUT NECESSARY PERMISSION IN WRITING.” The same information can be seen on the edge of the wood block attached by a plastic holder that would have made identification much easier.
Yellow, reunion 1981 B.C.H.S., ordinary cotton/poly short sleeve t-shirt, black 16.5 diameter circle with LABOR OMNIA VINCIT printed in 1.0 high letters and a black plaque with BCHS in yellow and 0.5 lettering KNOWLEDGE in black, "REUNION '81' underneath the circle in black.
Yellow, reunion 1981 B.C.H.S., ordinary cotton/poly short sleeve t-shirt, black 16.5 diameter circle with LABOR OMNIA VINCIT printed in 1.0 high letters and a black plaque with BCHS in yellow and 0.5 lettering KNOWLEDGE in black, "REUNION '81' underneath the circle in black.
Grey plastic commemorative plaque with mounting holes each corner. "LAWRENCE GRASSI Mountaineer. guide. pioneer. trail builder. miner. and friend of all mountain travellers. BORN - Falmenta. Italy. December 20. 1890 DIED - Canmore. Alberta. February 5. 1980. Construction of this mountain hut was m…
Grey plastic commemorative plaque with mounting holes each corner. "LAWRENCE GRASSI Mountaineer. guide. pioneer. trail builder. miner. and friend of all mountain travellers. BORN - Falmenta. Italy. December 20. 1890 DIED - Canmore. Alberta. February 5. 1980. Construction of this mountain hut was made possible by: Lawrence Grassi - Canmore Alberta and the generosity of the Hayes family of Portland. Oregon: Edmund Hayes. Senior Former President. Canmore Mines Ltd. Edmund Hayes. Junior Frederick W. Hayes Philip S. Hayes. DEDICATED AUGUST. 1981"
a) a round gold medal, raised edge with 14 raised maple leaf’s against a blasted background, in the bottom middle is a sunken circle with raised edges and a raised, smooth top of a torch. The circle is 2.2cm in diameter and has a implanted navy medallion with a gold curler just finished throwing a …
a) a round gold medal, raised edge with 14 raised maple leaf’s against a blasted background, in the bottom middle is a sunken circle with raised edges and a raised, smooth top of a torch. The circle is 2.2cm in diameter and has a implanted navy medallion with a gold curler just finished throwing a stone. Verso: engraved “BANFF WINTER FESTIVAL 1981”.b) a round gold medal, raised edge with 14 raised maple leaf’s against a blasted background, in the bottom middle is a sunken circle with raised edges and a raised, smooth top of a torch. The circle is 2.2cm in diameter and has a implanted smooth gold medallion engraved “HORSESHOES”. Verso: engraved “BANFF WINTER FESTIVAL 1981”.c) a round silver medal, raised edge with 14 raised maple leaf’s against a blasted background, in the bottom middle is a sunken circle with raised edges and a raised, smooth top of a torch. The circle is 2.2cm in diameter and has a implanted smooth navy medallion and engraved in silver a turning skier looking right. Verso: engraved “BANFF WINTER FESTIVAL M.M. RACE 1981”.d) a round bronze medal, raised edge with 14 raised maple leaf’s against a blasted background, in the bottom middle is a sunken circle with raised edges and a raised, smooth top of a torch. The circle is 2.2cm in diameter and has a implanted smooth navy medallion and engraved in silver a turning skier looking right. Verso: engraved “BANFF WINTER FESTIVAL M.M. RACE 1981”.e) a round bronze medal, raised edge with 14 raised maple leaf’s against a blasted background, in the bottom middle is a sunken circle with raised edges and a raised smooth top of a torch. The circle is 2.2cm in diameter and has a implanted smooth navy medallion and engraved in silver a turning skier looking right. Verso: engraved “BANFF WINTER FESTIVAL M.M. RACE 1981”.
a. A silver plate with “To Nicholas “Nick” Morant from his CPR friends June 1st, 1981” engraved on the front and “14145 ELKINGTON & CO A.T. WILEY COY LIMITED MONTREAL” engraved on the back.b. dark brown rag to clean plate.
a. A silver plate with “To Nicholas “Nick” Morant from his CPR friends June 1st, 1981” engraved on the front and “14145 ELKINGTON & CO A.T. WILEY COY LIMITED MONTREAL” engraved on the back.b. dark brown rag to clean plate.
Blue, Mount Everest, red and navy design, ordinary blue cotton short sleeve t-shirt, red maple leaf 20.0 x 27.0 with climber holding up and ice axe superimposed on left side of maple leaf, on right side lettering in navy,1.0 tall reading :"Canadian Mt. Everest Expedition 1982".
Blue, Mount Everest, red and navy design, ordinary blue cotton short sleeve t-shirt, red maple leaf 20.0 x 27.0 with climber holding up and ice axe superimposed on left side of maple leaf, on right side lettering in navy,1.0 tall reading :"Canadian Mt. Everest Expedition 1982".
Clear circular plastic tube with a black plastic base indented to hold the cube. Joining the top of the tube to the base is a gold coloured piece of tape on which is written "souvenier (s0c) puzzler". Five sides of the cube visible: Sulphur Mountain Gondola, Banff Avenue, Maligne Lake, Mount Rund…
Clear circular plastic tube with a black plastic base indented to hold the cube. Joining the top of the tube to the base is a gold coloured piece of tape on which is written "souvenier (s0c) puzzler". Five sides of the cube visible: Sulphur Mountain Gondola, Banff Avenue, Maligne Lake, Mount Rundle, and in blue letters on white "The Canadian Rockies" written on the top of the cube.
A red snap-brim baseball cap, front panel solid fabric with triangular patch that reads “EVEREST 82” underneath a Canadian flag. Back of hat is open red mesh, adjustable with snap closure. Written in black marker on the underside of the brim “L GALLAGHER.” Written in green marker on the foam inside…
A red snap-brim baseball cap, front panel solid fabric with triangular patch that reads “EVEREST 82” underneath a Canadian flag. Back of hat is open red mesh, adjustable with snap closure. Written in black marker on the underside of the brim “L GALLAGHER.” Written in green marker on the foam inside front panel “Robbie G.”
A blue baseball cap with “ORTOVOX AVALANCHE SAFETY EQUIPMENT” written in red and yellow stitching on the front. “ORTOVOX” is stitched in red and “AVALANCHE SAFETY EQUIPMENT” below it in yellow. Back of hat has small opening where it can be adjusted using a leather strap and metal clasp. The metal c…
A blue baseball cap with “ORTOVOX AVALANCHE SAFETY EQUIPMENT” written in red and yellow stitching on the front. “ORTOVOX” is stitched in red and “AVALANCHE SAFETY EQUIPMENT” below it in yellow. Back of hat has small opening where it can be adjusted using a leather strap and metal clasp. The metal clasp is attached to the hat with a snap.