Lantern slide supplies, roll film, film cement; (a) grey paper box (11.1x2.6x9.1) for holding lantern plates; label:Imperial "Velona" Lantern Plates, with directions for use; (b) orange paper box (11.3x2.2x9.3) for holding lantern slide plates; label "Royal Lantern SlidePlate, Canadian Kodak Co."; …
Lantern slide supplies, roll film, film cement; (a) grey paper box (11.1x2.6x9.1) for holding lantern plates; label:Imperial "Velona" Lantern Plates, with directions for use; (b) orange paper box (11.3x2.2x9.3) for holding lantern slide plates; label "Royal Lantern SlidePlate, Canadian Kodak Co."; writing on box lid; (c) unopened box with greypaper wrapping (9.2 x2.1x12.3); label on front "Imperial Orthochrome Plates; special sensitive Imperial Dry Plate Co Ltd. with illustration of boy in sailor suit photographing girl and small child on rocks by seaside; back label listing material quality; (d) 16 mm motion picture film box; stickers w/B.Harmon; Harmony Drug Store Ltd.. (9.8x2.7x9.7); (e,f) 2 roll film each box (6.3x2.3x2.3)\ labelled "Kodak Verichrome film; (g) glass bottle (empty) film cement, cork in top with tape wrapped total height around label: A.S.N. withuse mentioned; (bottle: 10.2 x 4.0 dia.).
Five cardboard boxes, commercial packaging for lantern slides.a,b) Yellow label with black rectangle “ROYAL Lantern Slide Plate MANUFACTURED BY CANADIAN KODAK CO. LIMITED TORONTO CANADA.” with a crest and additional information about the plates and handwritten notes in pencil. The bottom of (b) ha…
Five cardboard boxes, commercial packaging for lantern slides.a,b) Yellow label with black rectangle “ROYAL Lantern Slide Plate MANUFACTURED BY CANADIAN KODAK CO. LIMITED TORONTO CANADA.” with a crest and additional information about the plates and handwritten notes in pencil. The bottom of (b) has “LANDSCAPE” written in pencil.c) Blue-green label on black box. No bottom. The label reads “THE STANDARD Lantern Slide Plates MANUFACTURED BY EASTMAN KODAK CO. ROCHESTER, N.Y. SUCCESSOR TO STANDARD DRY PLATE CO.” There is a paper label on one end “1 DOZ. STANDARD SLOW LANTERN SLIDE PLATES 31/4 X 4.”d) Black box with navy and yellow label “ELLIOTT & SONS LTD. LANTERN TRANSPARENCEY BARNET PLATE FOR WARM OR COLD TONES INSTRUCTIONS ENCLOSED WORKS, BARNET, HERTS.” The box top and bottom are held together with a white cotton twill tie (added by WMCR archives).e) Grey box top (no bottom) with white and blue label “DIRECTIONS FOR USING THE IMPERIAL (“SPECIAL”) LANTERN PLATES...” with instructions for use and “THE IMPERIAL DRY PLATE Co., Ltd., CRICKLEWOOD, LONDON, N.W.”
A pair of empty Royal Dry Plate boxes, used for storing lantern slides. a) A Royal Dry Plate box with a label on the lid. Along the edge of the lid is a red border, in a dark brown square white text reads “ROYAL” “COMPLETE DIRECTIONS INSIDE PACKAGE” “FOR SALE BY ALL DEALERS IN PHOTOGRAPHIC GOODS”, …
A pair of empty Royal Dry Plate boxes, used for storing lantern slides. a) A Royal Dry Plate box with a label on the lid. Along the edge of the lid is a red border, in a dark brown square white text reads “ROYAL” “COMPLETE DIRECTIONS INSIDE PACKAGE” “FOR SALE BY ALL DEALERS IN PHOTOGRAPHIC GOODS”, an illustration of a take on the Royal Crest is in the middle of the label, and “Dry Plate MANUFACTURED BY CANADIAN KODAK CO. LIMITED TORONTO. CANADA”. Along one of the edges of the lid is a sticker that reads in handwriting “Lantern Slides”, the opposite edge has another label that is black with red text. The red text reads “1 Dozen 3 1/4 x 4 1/4” “ROYAL PLATE Special Extra Rapid” and “Emulsion Number”. The bottom of the box is lined with tape, along the edges. b) A similar Royal Dry Plate box with different colouring. The top of the lid features a label sticker(?) the background is a bluish-grey with a brown square with the text that reads “ROYAL” “COMPLETE DIRECTIONS INSIDE PACKAGE” “FOR SALE BY ALL DEALERS IN PHOTOGRAPHIC GOODS”, an illustration of a take on the Royal Crest is in the middle of the label, and “Dry Plate MANUFACTURED BY CANADIAN KODAK CO. LIMITED TORONTO. CANADA”. Underneath the label is more text that reads “The plates in this package have been made with great care and while they will be replaced if found to be defective in manufacture, they are sold without warranty of any kind, expressed or implied.” One side of the edge of the lid has a black label with red text. The red text reads “1 Dozen 3 1/4 x 4 1/4” “ROYAL PLATE Special Extra Rapid” and “Emulsion Number”. The bottom of the box is lined with tape, along the edges. There is some handwriting along the box but it is illegible. 2.8 x 11.7 x 9.1 cm.
Wooden box: 38 cm X 12 cm X 14 cm. Box has leather handle at top and metal handle at one end. Two wooden portions separate the box into three sections with removable wood separators, small pieces of felt line 2 sections of the box. White label that says “Lyon & Turnbull 432 04 February 2009” on lid…
Wooden box: 38 cm X 12 cm X 14 cm. Box has leather handle at top and metal handle at one end. Two wooden portions separate the box into three sections with removable wood separators, small pieces of felt line 2 sections of the box. White label that says “Lyon & Turnbull 432 04 February 2009” on lid of the box. Old, peeling and stained label on top under handle, illegible. Faded, peeling labels on front, some words legible: “from the Canadian Pacific Rly Co.62 to 65 Charing Cross, London, S.W. 1. “3” Engraved on upper rim of box.
handmade rectangular wooden box with long leather strap bolted in the two opposite small sides; mitered butt joinery reinforced with metal spine and nails; one coat of brown paint on the outside, natural wood showing inside
handmade rectangular wooden box with long leather strap bolted in the two opposite small sides; mitered butt joinery reinforced with metal spine and nails; one coat of brown paint on the outside, natural wood showing inside
three lantern slide boxes:(a) rectangular wooden box with lid hinged on one long side and two hooks on the opposite side; Dark brown varnish coating; rabbet joinery; on one of the box small sides, there is a Dymo label with archival number: “V353 / PS 1 - 78” above a yellowed label with red frame w…
(a) 12.0 ; (b) 12.5 ; (c) 14.4 x (a) 12.2 ; (b) 12.2 ; (c) 12.7 x (a) 32.0; (b) 32.7; (c) 33.0 cm
Description
three lantern slide boxes:(a) rectangular wooden box with lid hinged on one long side and two hooks on the opposite side; Dark brown varnish coating; rabbet joinery; on one of the box small sides, there is a Dymo label with archival number: “V353 / PS 1 - 78” above a yellowed label with red frame with number 19 in top left corner, circled in green and print: “LEACOCK SLIDES / 1925 - 1931 / 1 - 78”; black pen handwritten number “191” in top left corner of small side; three square compartments inside with sides padded with green felt(b) similarly built box to (a) with smaller dimensions ; Dymo label on one small side with archival number: “V353 / PS 79 - 156”; Black pen handwriting on the lid’s side: “191 LEACOCK / 79 - 156”; number 191 circled in green(c) rectangular wooden box with lid hinged on one long side and two hooks on the opposite side; dark brown varnish coating; dovetail joinery; on one of the box small sides, there is a Dymo label with archival number: “V353 / PS 157 - 234” above a yellowed label with red frame and number 19 in top left corner, circled in green and print: “LEACOCK SLIDES / 1925 - 1931 / 157 - 234”; three square compartments inside with sides padded with Bordeaux felt
Wooden box with slots and padded field case. (a) wooden box, 32.4 x 10.5 x 13.2, 2 hook and eye latches on front. 64 slots with paper board dividers inside. "CAUTION" label inside lid, which reads “NEVER SHOW LANTERN SLIDES IN A STANDARD MOTION PICTURE MACHINE. THIS TYPE OF PROJECTOR WILL BREAK ALL…
Wooden box with slots and padded field case. (a) wooden box, 32.4 x 10.5 x 13.2, 2 hook and eye latches on front. 64 slots with paper board dividers inside. "CAUTION" label inside lid, which reads “NEVER SHOW LANTERN SLIDES IN A STANDARD MOTION PICTURE MACHINE. THIS TYPE OF PROJECTOR WILL BREAK ALL SLIDES SHOWN.” blue pencil writing “55 Slides, 54 neg. ———-“ White paper dot on hinge edge, brass hinges (b) rust brown pressed cardboard box, 36.0 x 11.4 x 16.6, fastened together with brass tacks. 1.5 thick felt padding interior. Leather straps with buckle fasteners running length and width (c) pressed cardboard box, 37.5 x 11.7 x 17.7, lid fastened with staples at ends. Felt padding interior top. A little wear on corner edges. Manufacturer's stamp interior “Manufactured by [ineligible] BOX CO. UNITED OTTAWA, CANADA.” fragments of destination label exterior, “Banff, Alberta.”
Black metal lantern slide projector with bellows. The projector is marked on the metal lens casing with “BRENKERT LIGHT PROJECTION CO. DETROIT MICHIGAN” in a diamond. There is a wooden slide holder coloured black. The projector has a black metal case with canvas straps and a leather handle. The…
Black metal lantern slide projector with bellows. The projector is marked on the metal lens casing with “BRENKERT LIGHT PROJECTION CO. DETROIT MICHIGAN” in a diamond. There is a wooden slide holder coloured black. The projector has a black metal case with canvas straps and a leather handle. The case is marked “BRENKERT - DETROIT” on the short sides. There is a red potsal sticker attached to the top of the case and an address tag attached to the handle. The address tag is marked “THE ALPINE CLUB OF CANADA” in red with a handwritten address below.
Lantern slide projector (Delineascope) (a) with metal case (b, c) and accessories, black matte finish metal body, fabric bellows, chrome lens casing with manufacturer's stamp, front part of lens detachable, lens cap lined with velvet. 2 chrome finished rods in tube connected to body extended to le…
Lantern slide projector (Delineascope) (a) with metal case (b, c) and accessories, black matte finish metal body, fabric bellows, chrome lens casing with manufacturer's stamp, front part of lens detachable, lens cap lined with velvet. 2 chrome finished rods in tube connected to body extended to lens mounting plate, carrying handle top of slide carrier. Wooden slide carriage with 9.1x8.7 openings (2) knob for opening body casing. A bubble-like back lining up with concave mirror inside 500 watt bulb. Compartment for holding the convex lenses (1 biconvex, other planoconvex) manufacturer's label on a hinged door with latch. Entire body attached with pivoting rod to base, wingnut holds in place. Spare bulb (h) in box (g) marked "Edison Mazda Lamp" lens cleaning tissue (f). 4 pieces wood 9.0x1.0 bound with masking tape, metal bracket wrapped in tissue paper (all together i). Electrical cord (d) with switch midway, detaches from male connector under at back side of body. Rectangular metal carrying case held closed with canvas strap.