Beige and possibly celadon glazes. Beige glaze inside bowl crackled and bubbled with pitting and open areas revealing red clay underneath. Outside pitted more on one side and smoother glazing on other side. Trimmed foot and stamp on base, very small chip out of crackle line inside bowl.
Beige and possibly celadon glazes. Beige glaze inside bowl crackled and bubbled with pitting and open areas revealing red clay underneath. Outside pitted more on one side and smoother glazing on other side. Trimmed foot and stamp on base, very small chip out of crackle line inside bowl.
(a) A 50 ml Waterman inkwell made of glass. The inkwell would have held black ink. There is a yellow sticker on the front face of the inkwell, which contains a black rectangular box near the top, with the text: “NOIRE” within it. Underneath this, there is the text: “ENCRE WATERMAN”; “50 ml MADE IN …
(a) A 50 ml Waterman inkwell made of glass. The inkwell would have held black ink. There is a yellow sticker on the front face of the inkwell, which contains a black rectangular box near the top, with the text: “NOIRE” within it. Underneath this, there is the text: “ENCRE WATERMAN”; “50 ml MADE IN FRANCE” in black ink.On the bottom of the inkwell there is raised text in the glass which reads: “WATERMAN MADE IN FRANCE APPROX 2 OZ”. There is also a “10” apparent, near the middle of the viewer-right side. (b) The inkwell has a black, plastic, screw-on lid.
“Premo D” folding camera (4”x5” format) with a leather covered wooden frame. The camera has a leather handle centred on the top and held in place with brass keepers. The hinged front of the camera opens to lie flat and has a brass track (3.2 cm wide) running down the centre. The red leather bell…
“Premo D” folding camera (4”x5” format) with a leather covered wooden frame. The camera has a leather handle centred on the top and held in place with brass keepers. The hinged front of the camera opens to lie flat and has a brass track (3.2 cm wide) running down the centre. The red leather bellows extend along the track and end with a wooden frame that holds a lens (missing) and a viewfinder. The camera also has hinged doors on the right side and on the back.b) Film plate holder loaded in the camera’s side chamber.
A handcarved wooden weaving shuttle. The shuttle is roughly rectangular with one pointed end and two points at the opposite end. The centre of the shuttle is cut out and has a pointed wooden bar in the middle supported by a nail.
A handcarved wooden weaving shuttle. The shuttle is roughly rectangular with one pointed end and two points at the opposite end. The centre of the shuttle is cut out and has a pointed wooden bar in the middle supported by a nail.