A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “LONGWARE” is engraved on the outside middle.
A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “LONGWARE” is engraved on the outside middle.
A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “HG” engraved on the inside along with “STUBAI AUSTRIA”
A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “HG” engraved on the inside along with “STUBAI AUSTRIA”
A carabiner with three pitons attached:(a) an aluminum D-ring carabiner (11.0X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a chr…
A carabiner with three pitons attached:(a) an aluminum D-ring carabiner (11.0X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a chromalloy steel, hand-forged, angle piton with a round hole at one end. Stamped on both sides is a diamond with a “C” in the middle.(c) A chromalloy steel, hand-forged, angle piton with a round hole at one end”AG” stamped on the inside.(d) A chromalloy steel, hand-forged, short, angle piton with a round hole at one end.
A reversible (green one side and beige on the other), hooded, pullover jacket with diagonal pocket openings above the waist on both sides. The hood has a corded cotton drawstring threaded through to loosen or tighten and below there is an opening with three buttons at the neck. There are two slit p…
A reversible (green one side and beige on the other), hooded, pullover jacket with diagonal pocket openings above the waist on both sides. The hood has a corded cotton drawstring threaded through to loosen or tighten and below there is an opening with three buttons at the neck. There are two slit pocket opening with buttons to open and close, and a cord threaded through the bottom of the jacket to pull through for tightening. The cuffs have a flap with a button and hole to tighten around the wrists.
A sling and an arm immobilizer for arm/collarbone injuries. Both are made from grey a canvas-type cotton bordered by light white cotton:(a) one piece wide at the bottom (25.0x32.0cm wide) sewn together at the top and open to allow an arm to be placed within. There is one piece of Velcro that the tw…
A sling and an arm immobilizer for arm/collarbone injuries. Both are made from grey a canvas-type cotton bordered by light white cotton:(a) one piece wide at the bottom (25.0x32.0cm wide) sewn together at the top and open to allow an arm to be placed within. There is one piece of Velcro that the two strips on the immobilizer attaches to. The straps (130.02.50cm wide) are to tie around the neck. There is a white manufacturer’s label, viewer’s left, with blue script ”All Orthopedic Appliances” and then in print “MIAMI. FLA LARGE FOR CARE SEE REVERSE”; au verso “HAND WASH IN COOL WATER WITH MILD SOAP. NO BLEACH. DO NOT TWIST OR WRING. DO NOT DRY NEAR HEAT OR SUN CAUTION FEDERAL LAW RESTRICTS THIS DEVICE TO SALE BY OR ON THE ORDER OF A PHYSICIAN.”(b) A strip (101.0x13.0cm wide) with two pieces of Velcro (5.50cm wide) on each end that can attach to the other portion of the Velcro on the sling; it wraps around the body to keep the sling/arm secure.
Canvas bag with leather bottom and shoulder straps, grommet and string closure and metal zipper opening on side, bottom has zipper opening, shoulder straps bound on metal D-ring which is attached to back by a leather patch
Canvas bag with leather bottom and shoulder straps, grommet and string closure and metal zipper opening on side, bottom has zipper opening, shoulder straps bound on metal D-ring which is attached to back by a leather patch
A tanned leather, tool holder that attaches to a belt; used for mountaineering. There are four rivetted holes, which keeps the pieces of leather together, creating an opening to slip a belt through. There is an etched mountain on the front with a climbing tool in front of it.
A tanned leather, tool holder that attaches to a belt; used for mountaineering. There are four rivetted holes, which keeps the pieces of leather together, creating an opening to slip a belt through. There is an etched mountain on the front with a climbing tool in front of it.