An old-fashioned metal alarm clock with a manual bell (4.0x8.0cm wide) on top. The face is off-white in colour and made from paper. The numbers on the face are in Roman numerals with gold-coloured ornate crosses in between each number. There is a round, intricate, gold-coloured design (7.0cm radi…
An old-fashioned metal alarm clock with a manual bell (4.0x8.0cm wide) on top. The face is off-white in colour and made from paper. The numbers on the face are in Roman numerals with gold-coloured ornate crosses in between each number. There is a round, intricate, gold-coloured design (7.0cm radius) in the centre of the face. There are two black clock hands, hour and minute, and two smaller mini faces (both measuring 2.0cm wide) above and below the centre of the face. The top mini face is an alarm, with numbers 1-12. The bottom mini face displays the seconds, in degrees of 10 with numbers. On top of the bell there is a gold-coloured ring, possibly used for carrying. There are two gold-coloured splayed legs to support the clock when upright. There is a golden banded detail around the circumference of the face and the body. On the back of the clock, there are two wind-up mechanisms, the viewer-left key is marked with “W.A.” and has an arrow pointing in a clockwise direction, the viewer-right key is marked with “W.T.” and has an arrow pointing in a counterclockwise direction. Situated between these wind-up mechanisms are two buttons that are arranged vertically. The top button controls the alarm and moves the hands in a clockwise direction. The bottom button is missing. Above the top button there is an “A”, and below the bottom button there is an “H”. There is also a slide-adjustment knob marked with an “F” on viewer-left and “S” on viewer-right (possibly used as a faster-slower feature for the alarm bell). There is also a button missing from underneath this slide-adjustment knob. Scratched into the top of the back of the clock is “Nick Morant Banff”. Written upside-down at the top viewer-right is “55.”
(a) One black and silver ballpoint pen measuring 15.5 cm in length. Located 4 cm from the top of the pen there is a hole, possibly used to attach the pen with a chain. (b) The holder consists of a varnished wood base, measuring 9.0 cm (height) x 9.0 (width) x 9.0 (length). The top of the object con…
(a) One black and silver ballpoint pen measuring 15.5 cm in length. Located 4 cm from the top of the pen there is a hole, possibly used to attach the pen with a chain. (b) The holder consists of a varnished wood base, measuring 9.0 cm (height) x 9.0 (width) x 9.0 (length). The top of the object contains a gold cylindrical holder mounted on a swivel ball that holds the pen. On the top of the holder, located in the middle, there is also a shield-shaped Canadian Pacific logo with a silver beaver on top holding a pen. The red shield contains the words “Canadian Pacific” in white lettered script with a white border around its circumference. Underneath the words “Canadian Pacific” there is a small white globe with the words “SPANS THE WORLD” written in silver. The front of the object is on a slant and contains a gold plaque with “NICK MORANT” engraved. The plaque measures 2.0 cm (height) x 7.7 (length). The bottom of the object has not been varnished. The holder has four green circular pads located in the four corners of the object and offer it greater traction. The pads measure 1 cm (diameter) each. There is also a “MADE IN U.S.A” sticker located in the top viewer-right corner. Located in the top middle (between the two felt pads) there is a screw that attaches the gold cylindrical holder that is mounted on the opposite side.
A maroon and grey corduroy cap with a sun visor . The cap is divided into six pie-shaped segments meeting at the crown centre with a maroon, plastic, round button. The front crown’s two segments are grey and the rest of the cap is maroon. There is a CPR logo label on the front with a black shield,…
A maroon and grey corduroy cap with a sun visor . The cap is divided into six pie-shaped segments meeting at the crown centre with a maroon, plastic, round button. The front crown’s two segments are grey and the rest of the cap is maroon. There is a CPR logo label on the front with a black shield, machine-embroidered, with gold on the borders and “CPR” in the centre; a gold spike behind “1885”, viewer’s left, “1985” viewer’s right. Viewer’s left in black “STAND FAST”, red CPR logo viewer’s right, underneath in maroon and becoming larger with every letter “ON SAFETY”, underneath in black “REVELSTOKE DIVISION”. The inside crown has foam backing and cotton strips sewn on the segments. There are four metal bordered holes for air flow. A white label inside reads “PROMO-WEAR TEULON, MANITOBA, CANADA, their logo,” 85% COTTON/COTON 15% POLYESTER MADE IN/FABRIQUE AU CANADA.
One red and white, polyester and net, cap with a sun visor. There is an orange/red label sewn on the front with white thread; it has a black stylized mountain edged in white and the CP logo “CP RAIL ROGERS PASS PROJECT”. The cap is red in the front and white netting in the back: six segments, two r…
One red and white, polyester and net, cap with a sun visor. There is an orange/red label sewn on the front with white thread; it has a black stylized mountain edged in white and the CP logo “CP RAIL ROGERS PASS PROJECT”. The cap is red in the front and white netting in the back: six segments, two red (polyester with foam backing) in front and four white (netting) in the back. There is a red plastic button sewn on top.
An untanned, buckskin jacket with floral beadwork design on the back across the shoulders in flowers with colours red, blue, black, yellow and leaves of green. The area below the beadwork is pinked and fringed. There is mirror image, identical beadwork on each side of the front of the jacket. There…
An untanned, buckskin jacket with floral beadwork design on the back across the shoulders in flowers with colours red, blue, black, yellow and leaves of green. The area below the beadwork is pinked and fringed. There is mirror image, identical beadwork on each side of the front of the jacket. There is a zippered front closure and a pinked and beaded portion on each side of the zipper. The beadwork is alternating blue, yellow and red flowers with blue and yellow leaves and stems and then below flowers with colours of red, blue, black, yellow and leaves in green. There are four flowers on each side. On the flat front pockets the borders are pinked and the beadwork is a flower with red petals rimmed with black and a yellow centre. The leaves and stem are green.
A pair of well-worn, low-top slipper-style beaded buckskin moccasins (28.0x12.5cm wide), two-piece construction with sewn-on cuffs, foot, vamp with leather edging around foot opening, beadwork: five lines of green beads interspersed with gold, orange zigzag, in the middle blue zigzag with black clo…
A pair of well-worn, low-top slipper-style beaded buckskin moccasins (28.0x12.5cm wide), two-piece construction with sewn-on cuffs, foot, vamp with leather edging around foot opening, beadwork: five lines of green beads interspersed with gold, orange zigzag, in the middle blue zigzag with black closest to the toe, two more lines of blue zigzag with red, black and light green, simple light blue beading (three beads) sewn around the flap. Left moccasin (a) has a soft, lighter cuff, right moccasin (b) has a darker, heavier cuff that matches the moccasin.
A well-worn, fabric-lined, slipper-style beaded moccasins (24x11.0cm wide), two-piece construction, foot and vamp, fur border sewn around foot opening. Beadwork: vamp is a piece of yellow felt with a black bead border. There is a plant motif, stem starting at the toe, blue beads for the stem and le…
A well-worn, fabric-lined, slipper-style beaded moccasins (24x11.0cm wide), two-piece construction, foot and vamp, fur border sewn around foot opening. Beadwork: vamp is a piece of yellow felt with a black bead border. There is a plant motif, stem starting at the toe, blue beads for the stem and leaves, red, white, yellow with opalescent beads in the middle; above the plant motif, the word “ALASKA” in black beads.
Unworn, slipper-style moccasins (25.0x10.5cm wide) two-piece construction, beaded vamp and sewn-on flap around foot opening. Two lines of brown and orange cording around the beadwork, surrounded by a line of black beads, then lines of blue, green, red and orange beads, and in the centre a flower mo…
Unworn, slipper-style moccasins (25.0x10.5cm wide) two-piece construction, beaded vamp and sewn-on flap around foot opening. Two lines of brown and orange cording around the beadwork, surrounded by a line of black beads, then lines of blue, green, red and orange beads, and in the centre a flower motif of orange and green petals, black centre, against a white background with green, blue red, yellow and orange underneath.
A straw boater, flat top, grosgrain ribbon (6.0cm high) around the base of the crown. There is a dark brown, soft leather, sweatband sewn onto the inside of the crown rim and at the back, where it is pieced together, a fabric ribbon tied in a bow, and to the left of that, an embossed “MADE IN CANAD…
A straw boater, flat top, grosgrain ribbon (6.0cm high) around the base of the crown. There is a dark brown, soft leather, sweatband sewn onto the inside of the crown rim and at the back, where it is pieced together, a fabric ribbon tied in a bow, and to the left of that, an embossed “MADE IN CANADA” and logo. There is a plastic-covered circle of paper that fits into the crown; it has, stamped in black ink, “MADE IN CANADA” and logo. Above the tied bow there is a red and gold small circular sticker with the number “7” printed on it.
A brand new black grosgrain clip-on bow tie, still clipped to its original paper display card (5.8x16.0cm). Each side of the metal clip has the word “ARROW” engraved on it. Printed on the off-white card in red “ARROW”, underneath in much smaller letters in red “MADE IN CANADA” in the middle of an a…
A brand new black grosgrain clip-on bow tie, still clipped to its original paper display card (5.8x16.0cm). Each side of the metal clip has the word “ARROW” engraved on it. Printed on the off-white card in red “ARROW”, underneath in much smaller letters in red “MADE IN CANADA” in the middle of an arrow and underneath that in the largest letters “ARACLIP”. There is also a white sticker (2.0x2.0cm) with blue printing “Morgans” in script; stamped “Dept 28C”, underneath that “4k00646”.