5 assorted round biscuit cutters. a) a round biscuit cutter with a smaller hole set in the centre. Jen-shaped wooden handle painted green. Two small holes on either side of handle. b) round metal cutter (4.5 cm x 7.0 cm x 7.0 cm) with flat handle that spans width of cutter. c) same style as b but 3…
5 assorted round biscuit cutters. a) a round biscuit cutter with a smaller hole set in the centre. Jen-shaped wooden handle painted green. Two small holes on either side of handle. b) round metal cutter (4.5 cm x 7.0 cm x 7.0 cm) with flat handle that spans width of cutter. c) same style as b but 3.5 cm x 5.5 cm x 5.5 cm. d) round cutter (4.5 cm x 4.5 cm x 4.5 cm) with small wooden handle painted green. Two small holes on either side of handle. e) small (3.0 cm x 3.0 cm x 3.0 cm) round plastic cutter with a flat handle that spans the width.
A metal box grater with different sized grating surfaces on the 4 sides and a handle at the top. One one side is a shield with “GSW QUALITY MADE IN CANADA” stamped within and below.
A metal box grater with different sized grating surfaces on the 4 sides and a handle at the top. One one side is a shield with “GSW QUALITY MADE IN CANADA” stamped within and below.
A wood and stainless steel butter spreading knife. The knife has a wide flare blade with a rounded end and a small area of serrated teeth. The blade is wedged between two pieces of wood that are secured together with brass nails. Engraved on the blade very faintly is “L.L. Bean Inc FREEPORT MAINE S…
A wood and stainless steel butter spreading knife. The knife has a wide flare blade with a rounded end and a small area of serrated teeth. The blade is wedged between two pieces of wood that are secured together with brass nails. Engraved on the blade very faintly is “L.L. Bean Inc FREEPORT MAINE STAINLESS STEEL”
Two-part glass butter dish with a shallow base and deeper lid, both pieces have decorative beveling throughout the sides and on the top. Engraved into the base is “BOTTOM,” legible when the lid is removed - the base also has small handles that stick out from the short sides.
Two-part glass butter dish with a shallow base and deeper lid, both pieces have decorative beveling throughout the sides and on the top. Engraved into the base is “BOTTOM,” legible when the lid is removed - the base also has small handles that stick out from the short sides.
A metal and plastic combination bottle and can opener. Red plastic handle and handle for gear that opens cans. Large bottle opener at end. Stamped with “QUINTUPLET” on the bottle opener and “U.S. PAT. NO 2190940-D-100469” “CAHIL MFG CO N.Y.C.” by the handle.
A metal and plastic combination bottle and can opener. Red plastic handle and handle for gear that opens cans. Large bottle opener at end. Stamped with “QUINTUPLET” on the bottle opener and “U.S. PAT. NO 2190940-D-100469” “CAHIL MFG CO N.Y.C.” by the handle.
A combination bottle and can opener made of metal with a thick plastic handle. There is a sharp blade on one side of the metal piece and a bottle opener on the other. the metal is stamped with “Skyline ENGLAND REG DES. 824 822”.
A combination bottle and can opener made of metal with a thick plastic handle. There is a sharp blade on one side of the metal piece and a bottle opener on the other. the metal is stamped with “Skyline ENGLAND REG DES. 824 822”.
A small metal can opener with a blade and a small gear that is turned with a two sided key. Key is stamped with “IF BLADE STICKS WASH IN HOT WATER”. Body of the opener is stamped with “Vaughan SAFETY ROLL JR TRAFE MARK CAN OPENER MADE & PAT. IN U.S.A.”
A small metal can opener with a blade and a small gear that is turned with a two sided key. Key is stamped with “IF BLADE STICKS WASH IN HOT WATER”. Body of the opener is stamped with “Vaughan SAFETY ROLL JR TRAFE MARK CAN OPENER MADE & PAT. IN U.S.A.”
A carving set containing large and small carving knives; two carving forks (b is 2.0 cm x 4.0 cm x 29.0 cm and has two protrusions near the handle; c is 2.0 cm x 3.0 cm x 27.0 cm); and a sharpening steel (3.0 cm x 4.0 cm x 35.0 cm). All have handles made from antler and stainless steel blades/tines…
A carving set containing large and small carving knives; two carving forks (b is 2.0 cm x 4.0 cm x 29.0 cm and has two protrusions near the handle; c is 2.0 cm x 3.0 cm x 27.0 cm); and a sharpening steel (3.0 cm x 4.0 cm x 35.0 cm). All have handles made from antler and stainless steel blades/tines. The end of each handle is inset with a stainless steel piece that is stamped “STERLING”. a) has a pointed blade that is stamped with “RUSSELL GREEN RIVER WORKS STAINLESS”. Both b) and c) are stamped with “STAINLESS” under the tines.
A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with a flat piece of metal with small holes that acts as the filter. The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in p…
A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with a flat piece of metal with small holes that acts as the filter. The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in place with two protrusions along the edge. There is a metal band around the centre of the coffee maker. Stamped on the bottom is “7759-B 9 CUP PYREX MADE IN U.S.A.”
A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with two flat pieces of metal with small holes that acts as the filter. The filter is stamped with “MADE IN CANADA” The basket and filter are removable. The coffee maker has a glass handle and …
A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with two flat pieces of metal with small holes that acts as the filter. The filter is stamped with “MADE IN CANADA” The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in place with two protrusions along the edge. There is a metal band around the centre of the coffee maker. Stamped on the bottom is “7756-B 6 CUP PYREX MADE IN U.S.A.” “PYREX” is also embossed on the handle and engraved on the metal band below an image of flames. “PYREX MADE IN USA” is also on the lid.