Skip header and navigation

Narrow Results By

183 records – page 1 of 10.

Accessories Guitar Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0008%20a-m
Date
1930 – 1950
Material
metal; wood; ivory; plastic
Catalogue Number
104.34.0008 a-m
Description
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to t…
  1 image  
Title
Accessories Guitar Accessories
Date
1930 – 1950
Material
metal; wood; ivory; plastic
Dimensions
3.4 cm
Description
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to the band, tip is crimped in stiff fold, 3 have solder at the tip to form a longer point. (MFG: Fitrite).(b) finger pick set (2.5 x 1.8 x 2.0) six metal rings that fit over the finger tips, adjustable band has circles cut out along it, flame shaped fingernail rises from band, curling inward slightly, and with cut out circle at middle. (mfg: National) (c) finger pick (2.5 x 1.9 x 2.0) as (b) but without cut out circles (mfg: Artisto) (d) finger picks (3.0 x 1.7 x 1.9) two metal bands that wrap around finger tip, widening near the end, then narrowing to a point that extends off to one side of the finger. (e) finger picks (3.5 x 1.5 x 1.9) two flat ivory bands which curl once around finger tip and extend out to one side in a point. (f) pick (3.2 x 2.3 x .1) small, flat, egg shaped, marbleized, grey plastic, stiff. (mfg: Durro). (g) pick (3.0 x 2.2 x .1) as (f) but brown tortoise shell coloured plastic (mfg: Eureka). (h) pick (2.7 x 1.9 x .1) as (f) but transparent yellowed plastic ?, slightly curled. (i) capo (5.3 x 1.9 x .9) flat metal bar with small hooks at either end to hold tightly coiled spring across the under side, lined underneath bar with cork. (mfg: Elton). j) bridge ? (4.7 x .8 x 1.1) a long, half round, hollow metal bar with six incised rings spaced evenly along the length. (mfg: Kamiki). (k) slides (7.2 x 1.7 diam) two heavy, solid, brass rods (used to slide over strings when playing the guitar Hawaiian style) (1) peg (5.0 x .9 x 2.3) white, cast plastic peg with long shaft and flattened key with finger depression each side, ferrules around top of shaft. (m) bridge (4.7 x 1.4 x 1.9) low, unfinished wood bridge with small dark support perpendicularly across under middle, short legs thicken slightly at base, series of small notches across top, some deliberately cut into wood, some worn in odd places from strings (mfg: Grover).
Subject
Whyte home
households
entertainment
pastime
Annie White
music
accessories
equipment
sound
song
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0008 a-m
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Accessories Guitar Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0009%20a-e
Date
1930 – 1950
Material
wood; plastic
Catalogue Number
104.34.0009 a-e
Description
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, …
  1 image  
Title
Accessories Guitar Accessories
Date
1930 – 1950
Material
wood; plastic
Dimensions
5.0 x 1.3 x 0.5 cm
Description
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, high, yellowed, glass like bridge with arced top, and arch under between legs, curved in at sides, and four shallow notches across top. (d) pegs (15.9 x .9 x 1.9) three plain, wooden tuning pegs with straight, tapering shafts, and simple round flat keys at top with depressions for fingers to grasp, small slit cut across bottom, impressed marks from strings around bottom. (e)pick guard (7.8 x 5.2) small, lyre shaped form cut from a thin sheet of tortoiseshell patterned plastic, two pinholes at stem where broken off from something else (a bracket?).
Subject
Whyte home
households
entertainment
pastime
Annie White
music
accessories
equipment
sound
song;
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0009 a-e
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
wood; metal
Catalogue Number
108.04.0032 a,b
Description
Heavy, short skis, with metal toe plate and bindings. They become thicker at the beautifully curved tip. Metal edging is screwed on, holes going in through the skis below the bindings. The binding is "ATTENHOFFER'S ALPINA".
Title
Alpine Skis
Date
1930 – 1950
Material
wood; metal
Dimensions
9.0 x 135.0 cm
Description
Heavy, short skis, with metal toe plate and bindings. They become thicker at the beautifully curved tip. Metal edging is screwed on, holes going in through the skis below the bindings. The binding is "ATTENHOFFER'S ALPINA".
Subject
activities
sports
winter
skiing
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
108.04.0032 a,b
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1940
Material
wood; metal
Catalogue Number
108.04.1099 a,b
Description
Pair of home made unpainted skis. Very little camber, in fact practically flat. Rounded point. Metal screwed on edges, metal bindings "Ramy-Wike made in France".
Title
Alpine Skis
Date
1930 – 1940
Material
wood; metal
Dimensions
7.0 x 190.0 cm
Description
Pair of home made unpainted skis. Very little camber, in fact practically flat. Rounded point. Metal screwed on edges, metal bindings "Ramy-Wike made in France".
Subject
sports
winter
skiing
Credit
Gift of Eddie Hunter, Banff, 1995
Catalogue Number
108.04.1099 a,b
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
wood; metal
Catalogue Number
108.04.0033 a,b
Description
Wood skis with screwed on metal edges," Monarch" and under toe is embossed " Northland, USA Laconia N.H." Binding is " Monarch/Automatic".
Title
Alpine Skis
Date
1930 – 1950
Material
wood; metal
Dimensions
7.5 x 200.0 cm
Description
Wood skis with screwed on metal edges," Monarch" and under toe is embossed " Northland, USA Laconia N.H." Binding is " Monarch/Automatic".
Subject
activities
sports
winter
skiing
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
108.04.0033 a,b
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1945
Material
metal
Catalogue Number
103.09.1032 a-e
Description
Five ski pins attached to Dell Brewster's ski cap. (a) "First Trans Canada Ski Train 1937, bronze (b) Olympic pin, 5 lined circles in different colours (c) "Ski Runners 1940" blue, white, red enamelled bronze (d) German eagle with wreath in mouth, red green enamel (e) Swiss "St. Moritz" silver sk…
  1 image  
Title
Athletic Pin Collection
Date
1930 – 1945
Material
metal
Description
Five ski pins attached to Dell Brewster's ski cap. (a) "First Trans Canada Ski Train 1937, bronze (b) Olympic pin, 5 lined circles in different colours (c) "Ski Runners 1940" blue, white, red enamelled bronze (d) German eagle with wreath in mouth, red green enamel (e) Swiss "St. Moritz" silver skier, red and white Swiss shield.
Subject
sports
winter
skiing
Olympics
Dell Brewster
Credit
Gift of Dell Brewster, Banff, 1967
Catalogue Number
103.09.1032 a-e
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1936
Material
metal; wood
Catalogue Number
103.09.1045
Description
Black wooden plaque in shape of shield. Silver band across top etched "Brewster Trophy". Below that a silver coloured shield shape with a downhill skier centered. Across the top of this is etched "Championship Canadian Rockies" and below skier is "Combined Downhill and Slalom 1936". Small name…
  1 image  
Title
Athletic Plaque
Date
1936
Material
metal; wood
Dimensions
32.0 x 24.5 cm
Description
Black wooden plaque in shape of shield. Silver band across top etched "Brewster Trophy". Below that a silver coloured shield shape with a downhill skier centered. Across the top of this is etched "Championship Canadian Rockies" and below skier is "Combined Downhill and Slalom 1936". Small name plate centered bottom, etched into that "E.P.N.S. R".
Subject
sports
skiing
Brewster Trophy
Credit
Gift of Ed (Mrs.) Jamieson, Banff, 1966
Catalogue Number
103.09.1045
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1936
Material
wood; metal
Catalogue Number
103.09.1094
Description
Black turned wood, base for statuette trophy 103.09.1093. Solid wood, turned, central area has three silver plaques "King Edward Hotel Banff Western Canada Combined Downhill and Slalom", Shield shape "1936 J. Taylor Vancouver". "1938 Thobraatin Princeton",
  1 image  
Title
Athletic Trophy
Date
1936
Material
wood; metal
Dimensions
15.7 cm
Description
Black turned wood, base for statuette trophy 103.09.1093. Solid wood, turned, central area has three silver plaques "King Edward Hotel Banff Western Canada Combined Downhill and Slalom", Shield shape "1936 J. Taylor Vancouver". "1938 Thobraatin Princeton",
Subject
sports
winter
skiing
King Edward Hotel
Credit
Gift of J. L. King, 1974
Catalogue Number
103.09.1094
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1935
Material
fibre; skin; metal; plastic
Catalogue Number
103.08.0324
Description
Grey canvas backpack with leather straps, mounted on metal frame. Four pockets, one on either side and front and a zippered pouch on inside upper flap. Edges of pocket flaps bound by leather. Leather shoulder straps riveted to bottom of frame and buckled to top. Bag closure is thin rope and plastic…
  1 image  
Title
Backpack
Date
1930 – 1935
Material
fibre; skin; metal; plastic
Dimensions
46.0 x 17.0 x 40.0 cm
Description
Grey canvas backpack with leather straps, mounted on metal frame. Four pockets, one on either side and front and a zippered pouch on inside upper flap. Edges of pocket flaps bound by leather. Leather shoulder straps riveted to bottom of frame and buckled to top. Bag closure is thin rope and plastic toggle. Leather inset inside bag: “Bergans Original 39306”. “Mrs P. WHYTE BANFF ALBERTA” is faintly written on the front flap. A red plastic tag that reads “MOUNTAIN TRAVEL USA” “C. WHYTE” on one side and “If Lost Or Found Please Notify MOUNTAIN TRAVEL (USA) 1398 Solano Avenue Albany, California 94706” on the other is attached to the top handle. A fabric label that reads “Bergans ORIGINAL MADE IN OSLO NORWAY” with a drawing of two men is attached to the back of the bag.
Subject
activity
sports
skiing
winter
hiking
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.08.0324
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1940
Material
fibre ; metal; skin
Catalogue Number
103.08.1069
Description
Metal back frame in typical Bergen style, leather straps, bag is heavy cotton (canvas), grommet and string closure at top plus both sides for tightening, 3 outer pockets with buckle closures, top flap has 2 leather straps for buckle closure, hand printed on flap, "B.G.F. MOODIE - CALGARY"
  1 image  
Title
Backpack
Date
1930 – 1940
Material
fibre ; metal; skin
Dimensions
44.0 x 42.5 cm
Description
Metal back frame in typical Bergen style, leather straps, bag is heavy cotton (canvas), grommet and string closure at top plus both sides for tightening, 3 outer pockets with buckle closures, top flap has 2 leather straps for buckle closure, hand printed on flap, "B.G.F. MOODIE - CALGARY"
Subject
Moodie, Gordon B.
sports
hiking
skiing
Credit
Gift of Margaret Moodie, Vancouver, 1987
Catalogue Number
103.08.1069
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1935 – 1975
Material
metal; stone; glass
Catalogue Number
103.01.0192 a,b
Description
Two medium sized bar pins with clear oval stones at centres. Long hinged pin spikes across back fasten under locking hook clasps. (a) gold elliptical shaped with gold wire cross-hatching forming large diamond shapes on each side, enclosed with another wire outlining the shape of the pin. Large 1.1…
  1 image  
Title
Bar Pin
Date
1935 – 1975
Material
metal; stone; glass
Dimensions
0.9 x 0.8 . x 4.1 cm
Description
Two medium sized bar pins with clear oval stones at centres. Long hinged pin spikes across back fasten under locking hook clasps. (a) gold elliptical shaped with gold wire cross-hatching forming large diamond shapes on each side, enclosed with another wire outlining the shape of the pin. Large 1.1 x .7 cm , oval, water opal, Australia Stone? flashing green and red fire. Back of pin flat, forming silhouette of front. (b) rhodium ? plated, sparkling silver coloured ellipse of fine, delicate, filigree bordered by a narrow band of sharply engraved pattern which picks up the light. Framed at centre is oval 1.4 x .9 piece of transparent glass with a small diamond .2 cm dia. at the centre set in a diamond shaped setting. Back of glass carved with radiating spikes which show through and form pattern around diamond.
Subject
Whyte home
households
adornment
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.01.0192 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Basket, Ski Pole Ski Pole

https://archives.whyte.org/en/permalink/artifact106.04.0003
Date
1930 – 1950
Material
metal; leather
Catalogue Number
106.04.0003
Description
One ski pole basket. A silver metal ring with three red leather straps equally spaced attached to the ring. Within each leather strap is a 8.2 cm cut in the middle with a cut circle on each end of the cut. The straps are connected via a metal rivet. The leather is smooth on the top and rough/untrea…
  1 image  
Title
Basket, Ski Pole Ski Pole
Date
1930 – 1950
Material
metal; leather
Description
One ski pole basket. A silver metal ring with three red leather straps equally spaced attached to the ring. Within each leather strap is a 8.2 cm cut in the middle with a cut circle on each end of the cut. The straps are connected via a metal rivet. The leather is smooth on the top and rough/untreated on the bottom side.
Subject
ski
ski pole
sports
skiing
Credit
Gift of Frank Gourlay, Banff, 1991
Catalogue Number
106.04.0003
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
ceramic; metal
Catalogue Number
103.01.0151
Description
A short strand of dark blue ceramic beads strung on wire. Twenty-eight beads of mottled shades of blue. Wire twisted at ends to form loops holding bolt ring clasp. Clasp has eye for this purpose, but eye was not used.
  1 image  
Title
Beaded Bracelet
Date
1930 – 1950
Material
ceramic; metal
Dimensions
0.5 x 19.7 cm
Description
A short strand of dark blue ceramic beads strung on wire. Twenty-eight beads of mottled shades of blue. Wire twisted at ends to form loops holding bolt ring clasp. Clasp has eye for this purpose, but eye was not used.
Subject
Whyte home
households
adornment
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.01.0151
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
metal; skin
Catalogue Number
103.07.0172 a-f
Description
A collection of six, large, belt buckles of which four are silver, one is stainless steel, and one is brown snakeskin. (a )elliptical silver, 7.1 x 4.3 x 2.0, surface engraved with scrolled leaf pattern in low relief. Bar across short axis of ellipse set into soldered ends on back so that it swive…
  1 image  
Title
Belt Buckle
Date
1930 – 1950
Material
metal; skin
Dimensions
7.1 x 4.3 x 2.0 cm
Description
A collection of six, large, belt buckles of which four are silver, one is stainless steel, and one is brown snakeskin. (a )elliptical silver, 7.1 x 4.3 x 2.0, surface engraved with scrolled leaf pattern in low relief. Bar across short axis of ellipse set into soldered ends on back so that it swivels. Hooked over, and soldered to swivelling bar are two very sharp, pointed prongs. (b) oval silver wreath , 6.8 x 5.5 x .8, cast, open work wreath made up of figures of griffins, vines and leaves. Across long axis is fixed swivelling bar to which are soldered two short, sharp curving, prongs. Attached on back is large U-shaped loop of silver, to hold belt. (c) large round silver, 4.7 diam x .8 high, large ring of silver with two heavy trefoils at each end of ring butting against one another, A third trefoil with long, sharp spike attached by being formed into ring around bar. Tongue angled slightly at front where it fits against front of belt. d) smailer ring with two ball ends and a ball with plume attached to point. e) rectangular silver f) snakeskin square
Subject
Whyte home
households
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.07.0172 a-f
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Binding Plate, Ski Bindings

https://archives.whyte.org/en/permalink/artifact106.04.0009%20a-c
Date
1930 – 1950
Material
metal
Catalogue Number
106.04.0009 a-c
Description
A collection of three metal binding plates for skis.a) and b) are two silver metal binding plates that are rectangular in shape with a curve at the toe. There are 11 rivet holes along the edges of the plate (for attaching the plate to the ski). Down the middle is a straight line indentation.c) is a…
  1 image  
Title
Binding Plate, Ski Bindings
Date
1930 – 1950
Material
metal
Dimensions
0.4 x 6.5 x 22.8 cm
Description
A collection of three metal binding plates for skis.a) and b) are two silver metal binding plates that are rectangular in shape with a curve at the toe. There are 11 rivet holes along the edges of the plate (for attaching the plate to the ski). Down the middle is a straight line indentation.c) is a single green-beige metal binding plate. It is shaped in oval with a handle in the middle of the tip of the oval. There are 8 holes to attach the binding plate to the ski. There are two parallel lines in the oval shape that are indent into the plate. In the middle of the two lines is an image of a downhill skier and mountain with “GROSWOLD” underneath. 0.4 x 6.6 x 18.8 cm
Subject
ski
skiing
winter
sport
ski gear
equipment
binding plates
Credit
Gift of Frank Gourlay, Banff, 1991
Catalogue Number
106.04.0009 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1940
Material
skin; fibre; metal
Catalogue Number
103.03.1024
Description
Brown leather, square toe, yellow lace, felt trim, ankle-high, 2.3 thick band of light red felt around inside of top edge of ankle, fabric laces through 7 metal eyelets each side, leather loop top of heel, two rows of metal tacks in toe of sole, grooved edge on heel, pressed letters on sole "STEEL…
  1 image  
Title
Boot
Date
1930 – 1940
Material
skin; fibre; metal
Dimensions
14.8 x 10.5 x 30.2 cm
Description
Brown leather, square toe, yellow lace, felt trim, ankle-high, 2.3 thick band of light red felt around inside of top edge of ankle, fabric laces through 7 metal eyelets each side, leather loop top of heel, two rows of metal tacks in toe of sole, grooved edge on heel, pressed letters on sole "STEEL SHANK", light green felt linings.
Subject
sports
winter
skiing
Credit
Gift of Blair Porter, Cochrane, 1984
Catalogue Number
103.03.1024
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1935 – 1975
Material
hair
Catalogue Number
103.03.0066 a-dd
Description
A collection of four pairs of heavy grey and white wool boot socks. (a,aa) plain off white, 37.0 x 14.0,short, mid calf, ribbed legs with plain foot. Very heavy.(b,bb) grey with red band, 40.0 x 14.5, short, as above, of grey tweed with red and black band at top of cuff, handknit. (c,cc) long grey,…
  1 image  
Title
Boot Socks
Date
1935 – 1975
Material
hair
Description
A collection of four pairs of heavy grey and white wool boot socks. (a,aa) plain off white, 37.0 x 14.0,short, mid calf, ribbed legs with plain foot. Very heavy.(b,bb) grey with red band, 40.0 x 14.5, short, as above, of grey tweed with red and black band at top of cuff, handknit. (c,cc) long grey, 60.0 x 13.0, plain foot, double ribbed leg, with single ribbed 9.0 cm cuff which is reinforced with elastic thread at the bottom for half its width, grey tweed.(d,dd) Cowichan like,49.0 x 10.5, natural coloured wools. White background with brown patch toe and heel. Plain knit with band of brown design around leg, and 5.5 cm cuff of single ribbing, handknit.
Subject
households
sports
skiing
hiking
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.03.0066 a-dd
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1940
Material
cardboard, leatherette; glass, metal;
Catalogue Number
104.41.1053
Description
Kodak Anniversary box camera; brown, textured leather covered cardboard for body; leather strap on top;viewfinder window; body back clip top; viewfinder lens; internal lens front; body back clip; shutter release; film advance; foil decal commemorating 50th Anniversary on side; amber window at back.
  1 image  
Title
Box Camera
Date
1930 – 1940
Material
cardboard, leatherette; glass, metal;
Dimensions
14.7 x 11.1 x 8.4 cm
Description
Kodak Anniversary box camera; brown, textured leather covered cardboard for body; leather strap on top;viewfinder window; body back clip top; viewfinder lens; internal lens front; body back clip; shutter release; film advance; foil decal commemorating 50th Anniversary on side; amber window at back.
Subject
photography
Credit
Gift of Robert N. Smith, Canmore, 1985
Catalogue Number
104.41.1053
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1938
Material
metal; glass; paper
Catalogue Number
104.41.1113 a,b
Description
A simple black box camera with black, simulated textured leather. It also has an adhesive-taped, original box. The inverted aperture in the front has a black metal retention ring surrounding it. Below this “Agfa” is imprinted on the camera, surrounded by a diamond-shaped box. There is a black metal…
  1 image  
Title
Box Camera
Date
1938
Material
metal; glass; paper
Dimensions
8.5 x 6.5 cm
Description
A simple black box camera with black, simulated textured leather. It also has an adhesive-taped, original box. The inverted aperture in the front has a black metal retention ring surrounding it. Below this “Agfa” is imprinted on the camera, surrounded by a diamond-shaped box. There is a black metal rim which overlaps the edges on the front of the camera; on both sides there is a slight extension, .03 x.05 wide, 2.0cm from the top, with a hole in the metal. This fits over two small metal knobs on each side of the camera body. It appears that pushing the knobs in and pulling, would release the front part of the camera from the body. On the viewer’s left is the metal shutter release; a small metal lever that can be pulled down to release the shutter and expose the lens from inside the body. On the same side is the metal film winder, 3.0cm from the front and .50cm from the top; this is a flat piece of metal 2.0cm in diameter, with arrows indicating the direction to turn (clockwise arrows), a round raised metal tab, onto which is screwed a piece of metal (2.5cmx1.0cm wide in the middle) to wind the film. It can also be pulled out to release the metal film chamber. The metal is turned down on the side of each end so the fingers can grasp it for turning. A metal folding viewfinder is .50cm from the back and 2.7cm from top and bottom; a flat piece of metal 3.0cm sq., folded at the sides, is rivetted onto the body. Two flat metal pieces are attached at each end, one on a spring to fold down; this piece is 2.4x2.7cm wide with a window cut out .50x1.0cm wide. The other piece is 2.7cm sq. with a window of 1.5x2.4cm wide; the cutout has a piece of metal raised from the bottom of the window. The cutout is for perspective when you look through the viewfinder, vertically or horizontally. This piece of metal folds down to become the top, effectively making the viewfinder flat when not in use. There is a hinged door on the back of the camera and a cut-out metal latch on the door that connects to a small metal knob 1.0cm from the edge of the body. There is a red circle film window (1.0cm diagonally) which lets you read the frame number on the film. On the inside of the door are two rivets that connect the hinge. Above that and below the red circle, is a white painted circle with “USE AB” printed in black, overlapping a painted orange, blue, white, and yellow Agfa Plenachrome film box. The red viewfinder is 4.0cm from the base. A metal film chamber, with two metal rollers on each end for winding the film on, fits inside the camera. It can be released by pulling out the film winder. The canister is 7.0x5.0 wide, is open at one end, hollow in the centre, sloping upwards with a circular hole at the other end to let light in. There are two sprockets sitting on two cutouts on top of the canister and two on the bottom, onto which the film is winded. There are two rivets attaching two Y-shaped metal pieces, on either end that guide and let the film move and roll. The top of the camera has two metal knobs 1.5cm crosswise from each end, where a leather strap with a hole on either end, .07cm from the edge, fits in to make a diagonal strap/handle for carrying. The strap is imprinted with “A-8 CADET”. There is a small metal pull-up tab, 1.0cm from the edge of the front of the camera, that lets you time the shutter speed.
Subject
households
photography
hobbies
Bob Louden
Credit
Gift of Bob Louden, Calgary, 2004
Catalogue Number
104.41.1113 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1960
Material
metal
Catalogue Number
103.01.0152
Description
In small white leather, snap-open, box for jewellery. Gold filigree bar links alternated with small red enamelled circles, four gold ellipses, 2.4 cm long each filled with a different design of fine gold filigrees. Separated by two tiny gold disks enamelled with red circle containing gold cloison…
  1 image  
Title
Bracelet
Date
1930 – 1960
Material
metal
Dimensions
0.3 x 0.6 x 18.6 cm
Description
In small white leather, snap-open, box for jewellery. Gold filigree bar links alternated with small red enamelled circles, four gold ellipses, 2.4 cm long each filled with a different design of fine gold filigrees. Separated by two tiny gold disks enamelled with red circle containing gold cloisonne wire design, each very simple and different from one another. Each circle and each bar have two small eyes on either side which are joined to one another by small rings, giving the effect of a filigree square between each bar and circle, repeated around the bracelet. Ring bolt clasp, hand-made, 14 karat gold.
Subject
Whyte home
jewlery
fashion
accessories
households
adornment
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.01.0152
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

183 records – page 1 of 10.

Back to Top