Skip header and navigation

Narrow Results By

54 records – page 2 of 3.

Date
1950 – 2006
Material
fibre; metal
Catalogue Number
103.03.1117 a,b
Description
A pair of well-used, green, lace-up gaiters made out of lightweight, waterproof, canvas material. An ankle-to-knee gaiter, one piece of material sewn together, six brass-coloured grommets on one side, six silver-coloured metal hooks with individual leather backing, on the other side, with another t…
  1 image  
Title
Climbing, Skiing Gaiters
Date
1950 – 2006
Material
fibre; metal
Dimensions
44 x 33 cm
Description
A pair of well-used, green, lace-up gaiters made out of lightweight, waterproof, canvas material. An ankle-to-knee gaiter, one piece of material sewn together, six brass-coloured grommets on one side, six silver-coloured metal hooks with individual leather backing, on the other side, with another two grommets at the top, and a braided heavy-duty nylon lace for tightening and securing the gaiter to the calf. One gaiter has blue, waterproof patches sewn around both top grommets with green thread, also has one blue patch sewn with green thread on the outside and one on the inside; the manufacturer’s “Recreational Equipment INC. 1525 11th Avenue Seattle, Wash. 98122” label is secured on one side only. The other gaiter has only one blue patch on the top, one dislodged and bent grommet hanging on the nylon lace, the manufacturer’s “Recreational Equipment INC. 1525 11th Avenue Seattle, Wash. 98122” label is secure.
Subject
sports
climbing
hiking
skiing
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
103.03.1117 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1954
Material
paper; fibre
Catalogue Number
105.02.1019 a,b
Description
El Club Excursionista EXMEX (a) certificate (21.0x28.7) parchment drawing of a fully rigged male climber on a rock wall on left of page, drawing signed "GURZQUEZP", top of page in green "El Club Excursionista" "EXMEX" below that in Old English lettering, dated 15 Julio 1954 and signed by 3 diffe…
  1 image  
Title
Commemorative Certificate
Date
1954
Material
paper; fibre
Description
El Club Excursionista EXMEX (a) certificate (21.0x28.7) parchment drawing of a fully rigged male climber on a rock wall on left of page, drawing signed "GURZQUEZP", top of page in green "El Club Excursionista" "EXMEX" below that in Old English lettering, dated 15 Julio 1954 and signed by 3 different people. Small crest centre right pasted on certificate, stapled to a stencilled likeness of the Virgin Mary on fabric glued to paper (b) envelope (19.2x26.6) brown business envelope "The N.C.O. or Constable I/c., Royal Canadian Mounted police" "Banff Alta" handwritten, also stamped signature of commissioner R.C.M. Police, and "O.H.M.S."
Subject
sports
climbing
disasters
climbing disasters
Mount Victoria
Mexican Alpine Club
Credit
Gift of Bruno Engler, Harvie Heights, 1982
Catalogue Number
105.02.1019 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1980
Material
metal; vinyl; rubber
Catalogue Number
108.04.1128 a,b
Description
Pair of metal crampons with 12 points, vinyl straps and rubber cover for crampon points. Manufacturer’s stamp near toe: “SALEWA. DPB. Made in West Germany.”
  1 image  
Title
Crampons
Date
1950 – 1980
Material
metal; vinyl; rubber
Dimensions
8.0 x 12.0 x 33.0 cm
Description
Pair of metal crampons with 12 points, vinyl straps and rubber cover for crampon points. Manufacturer’s stamp near toe: “SALEWA. DPB. Made in West Germany.”
Subject
sports
climbing
Arnold Wexler
Credit
Gift of Arnold Wexler (Estate), Allentown, United States, 1999
Catalogue Number
108.04.1128 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950
Material
metal
Catalogue Number
108.04.1174 a,b
Description
A pair of crampons with one piece of cotton twill binding with metal closure attached to one of the side rings. They are made from one piece of metal and cut-out with four points, the centre bar is split and turned down. At the centre two pieces go off at right angles and curve upward with a ring …
  1 image  
Title
Crampons
Date
1950
Material
metal
Dimensions
4.5 x 10.5 x 4.5 cm
Description
A pair of crampons with one piece of cotton twill binding with metal closure attached to one of the side rings. They are made from one piece of metal and cut-out with four points, the centre bar is split and turned down. At the centre two pieces go off at right angles and curve upward with a ring for bindings at each end. Rings enclosed in loops 3 cm dia. Stamped on top “44” in between “ER”, the rest is indiscernible, “HAMMERWEK FULPMES” followed by “45” and underneath the mid-portion cutout that has been turned down “MUSTERSCHUTZ GES. GESCH.”
Subject
sports
climbing
Lizzie Rummel
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1989
Catalogue Number
108.04.1174 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1980
Material
fibre
Catalogue Number
103.06.1007
Description
Pair of men’s long white cotton thermal underwear. Label at waist: “Allen A. MADE IN U.S.A. INSULAIRE THERMAL UNDERWEAR”.
  1 image  
Title
Drawers Undergarment
Date
1950 – 1980
Material
fibre
Dimensions
88.0 cm
Description
Pair of men’s long white cotton thermal underwear. Label at waist: “Allen A. MADE IN U.S.A. INSULAIRE THERMAL UNDERWEAR”.
Subject
sports
climbing
Arnold Wexler
Credit
Gift of Arnold Wexler (Estate), Allentown, United States, 1999
Catalogue Number
103.06.1007
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Gramninger Seat Rescue Equipment

https://archives.whyte.org/en/permalink/artifact106.04.1025%20a-d
Date
c. 1960
Material
fibre; skin; metal
Catalogue Number
106.04.1025 a-d
Description
Gramminger Seat, canvas seat with leather trim, braces, straps. Metal buckles and snaps. Metal cable 51.0 long with loops each end - one loop attached to harness. Three metal brackets. See 106.04.1022 for related equipment.
Title
Gramninger Seat Rescue Equipment
Date
c. 1960
Material
fibre; skin; metal
Description
Gramminger Seat, canvas seat with leather trim, braces, straps. Metal buckles and snaps. Metal cable 51.0 long with loops each end - one loop attached to harness. Three metal brackets. See 106.04.1022 for related equipment.
Subject
mountain rescue
Canadian Rockies
parks
Hector Elliott
climbing
Gramminger seat
Credit
Gift of Hector Elliott, Cremona, 1990
Catalogue Number
106.04.1025 a-d
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955
Material
metal; plastic; leather
Catalogue Number
104.44.1020 a, b
Description
A metal hand compass (a) in a brown leather case (b) into which the compass fits perfectly. The case has “MADE IN GERMANY” stamped in ink on the inside. The compass is two-sided; one side is calibrated for a directional compass and one side is for measuring inches to miles and nautical miles (on ma…
  1 image  
Title
Hand Compass
Date
1955
Material
metal; plastic; leather
Dimensions
9.2 x 5.2 cm
Description
A metal hand compass (a) in a brown leather case (b) into which the compass fits perfectly. The case has “MADE IN GERMANY” stamped in ink on the inside. The compass is two-sided; one side is calibrated for a directional compass and one side is for measuring inches to miles and nautical miles (on maps). The compass is suspended on a central pivot with a metal ring on the top. The compass has a round face covered by hard clear plastic; the body of the compass is metal. The bottom of the compass is elongated with a point at the end where a small wheel is riveted onto the body. This compass wheel is used for measuring distances (land miles or nautical miles) on maps. On the directional side of the compass face the background is white and the letters and numbers are blue. The magnetic compass needle is half silver, half blue. The face dial is calibrated in degrees starting with 0, every 10 degrees marked to 330, completing the 360 degrees; N, E, S, and W and the lines marking them from the centre are in bold face blue N/E, S/E, S/W and N/W are in blue but smaller lettering. On the opposite side of the compass the outer ring is blue and the inner ring is orange, the background is white with the degrees in black; the needle is black also. The outer “inches to miles” compass has 39 on the top and every fifth degree is calibrated to 3, then 6, 12, 15, 18, 21, 24, 27, 30, 33, 36 where it comes full circle to the top at 39. The inner “Nautical Miles” starts with 0 at the top and every 10th degree is marked in succession by 5, 10, 15, 20, 25, 30, until it comes full circle to 0. The word “GERMANY” is printed at the bottom of the compass.
Subject
climbing
hiking
mountaineering
exploration
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
104.44.1020 a, b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1957 – 1963
Material
skin; metal; fibre; rubber
Catalogue Number
103.03.1074 a,b
Description
A pair of leather hiking/climbing boots that have been used for skiing also - cable imprint at heel. There are six metal lace hooks on each side and a pair of red and black laces, also one metal grommet on each side of the top lace hook. A Vibram sole has been nailed to the leather boot sole.
  1 image  
Title
Hiking Boots
Date
1957 – 1963
Material
skin; metal; fibre; rubber
Dimensions
19.0 x 12.0 x 33.0 cm
Description
A pair of leather hiking/climbing boots that have been used for skiing also - cable imprint at heel. There are six metal lace hooks on each side and a pair of red and black laces, also one metal grommet on each side of the top lace hook. A Vibram sole has been nailed to the leather boot sole.
Subject
sports
hiking
climbing
Hans Gmoser
Mt. McKinley
Wickersham Wall
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1989
Catalogue Number
103.03.1074 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950
Material
metal
Catalogue Number
108.04.1171
Description
An early style, horizontal, hard metal ice piton with an oblong metal ring attached. The blade is narrow with a point and the other end has a hole where the ring for the carabiner goes through. The oblong ring is not soldered together, just folded shut to close. The blade is bent and has nicks on …
  1 image  
Title
Horizontal Piton
Date
1950
Material
metal
Dimensions
3.0 x 3.0 x 26.7 cm
Description
An early style, horizontal, hard metal ice piton with an oblong metal ring attached. The blade is narrow with a point and the other end has a hole where the ring for the carabiner goes through. The oblong ring is not soldered together, just folded shut to close. The blade is bent and has nicks on either side making it serrated for ice climbing.
Subject
sports
climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1171
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955
Material
metal; wood
Catalogue Number
108.04.1148
Description
Typical ice axe, well-used, with head (blade) and two long metal strips extending 14 cm. from head (blade) riveted to the wooden shaft, two rivets to each side. “WERK... PMES” encircled and “ORIGINAL ASCHENBRENNER GES.GESCH.” stamped on the head. There is an a “M” scored in the wooden shaft 4 cm. f…
  1 image  
Title
Ice Ax
Date
1955
Material
metal; wood
Dimensions
75 x 30 cm
Description
Typical ice axe, well-used, with head (blade) and two long metal strips extending 14 cm. from head (blade) riveted to the wooden shaft, two rivets to each side. “WERK... PMES” encircled and “ORIGINAL ASCHENBRENNER GES.GESCH.” stamped on the head. There is an a “M” scored in the wooden shaft 4 cm. from the metal head. A screw is embedded in the wooden shaft 25.5cm from the pointed metal tip.
Subject
sports
climbing
mountaineering
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
108.04.1148
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1970
Material
wood; metal
Catalogue Number
108.04.1031
Description
Typical ice axe with cast iron head, point one end and blade on the other. Bottom has an iron point ca. 6.0 long, 13.0 in all with other as sleeve to attach to wooden shaft. Wooden shaft is weathered to a grey colour. The axe is heavier than usual. Stamped on side of head: "Hill & Son 4 Haym…
Title
Ice Ax
Date
prior to 1970
Material
wood; metal
Dimensions
28.0 x 118.5 cm
Description
Typical ice axe with cast iron head, point one end and blade on the other. Bottom has an iron point ca. 6.0 long, 13.0 in all with other as sleeve to attach to wooden shaft. Wooden shaft is weathered to a grey colour. The axe is heavier than usual. Stamped on side of head: "Hill & Son 4 Haymarket London".
Subject
sports
climbing
Abbot Pass
Philip Abbot
Credit
Gift of Tebor Bodi, Winnipeg, 1971
Catalogue Number
108.04.1031
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1970
Material
wood; metal; skin
Catalogue Number
108.04.1104
Description
Ice axe with two piece leather cover with buckle. Axe head has pointed tip and flat blade. On side of tip is stamped: "Fritz Joerg Zweilutdchinen Berner Oberland".
Title
Ice Ax
Date
prior to 1970
Material
wood; metal; skin
Dimensions
24.3 x 94.7 cm
Description
Ice axe with two piece leather cover with buckle. Axe head has pointed tip and flat blade. On side of tip is stamped: "Fritz Joerg Zweilutdchinen Berner Oberland".
Subject
sports
climbing
Credit
Gift of Unknown, 1968
Catalogue Number
108.04.1104
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1960
Material
metal; rubber
Catalogue Number
108.04.1115
Description
Metal ice piton with rubber end. Note attached: “BERNAYS ICE PITON. MADE BY DAVID BERNAYS (AAC, HMC) CA. 1955 FROM STAINLESS STEEL. MADE AT MASSACHUSETTS INST. OF TECHNOLOGY. DONATED BY EARLE R. WHIPPLE.”
  1 image  
Title
Ice Piton
Date
1950 – 1960
Material
metal; rubber
Description
Metal ice piton with rubber end. Note attached: “BERNAYS ICE PITON. MADE BY DAVID BERNAYS (AAC, HMC) CA. 1955 FROM STAINLESS STEEL. MADE AT MASSACHUSETTS INST. OF TECHNOLOGY. DONATED BY EARLE R. WHIPPLE.”
Subject
Alpine Club of Canada
American Alpine Club
Earle Whipple
David Bernays
sports
climbing
mountaineering
Credit
Gift of Alpine Club of Canada, Canmore, 1985
Catalogue Number
108.04.1115
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1992
Material
metal; enamel; plastic coating
Catalogue Number
103.09.1216
Description
Circular metal and enamel pin with the inner circle containing a stylized mountain on the top-third of a segmented globe on a blue enamel background, Above the circle are the letters “UIAGM” and below “IVBV”. The outer ring of the circular pin has these words printed on it “GUIDE DE MONTAGNES GUIDA…
  1 image  
Title
Membership Pin
Date
1992
Material
metal; enamel; plastic coating
Dimensions
2.75 cm
Description
Circular metal and enamel pin with the inner circle containing a stylized mountain on the top-third of a segmented globe on a blue enamel background, Above the circle are the letters “UIAGM” and below “IVBV”. The outer ring of the circular pin has these words printed on it “GUIDE DE MONTAGNES GUIDA BERGFUHRER”. The front of the pin is coated with clear plastic, presumably for protection from the elements as it must be worn when guiding. The back of the pin has two horizontal hinged pins on two separate pin sets with a swivel-locking safety catch for each of the pins. In between the pin sets is a rectangular box with the letter “K” on top and then “KOFEL-BZ”.
Subject
mountain guides
sports
mountains
climbing
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
103.09.1216
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1980
Material
metal; plastic
Catalogue Number
104.20.1129 a-f
Description
Aluminum pot with bail handle, smaller aluminum pot with lid, aluminum canister with screw-on lid, and two aluminum cups with wire handles.
  1 image  
Title
Mess Kit
Date
1950 – 1980
Material
metal; plastic
Dimensions
17.0 cm
Description
Aluminum pot with bail handle, smaller aluminum pot with lid, aluminum canister with screw-on lid, and two aluminum cups with wire handles.
Subject
sports
climbing
camping
Arnold Wexler
Credit
Gift of Arnold Wexler (Estate), Allentown, United States, 1999
Catalogue Number
104.20.1129 a-f
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1996
Material
metal; plastic; paper
Catalogue Number
103.09.1224
Description
A oblong plastic case with an opening to insert the name tag. The plastic case has an extension on the centre top where a metal swivel rivet is attached to a spring snap for clipping onto clothing. The words “SVAR Mod. 41 006” is imprinted under the metal rivet. The two-piece metal snap is connecte…
  1 image  
Title
Pin
Date
1996
Material
metal; plastic; paper
Dimensions
9 x 9.3 cm
Description
A oblong plastic case with an opening to insert the name tag. The plastic case has an extension on the centre top where a metal swivel rivet is attached to a spring snap for clipping onto clothing. The words “SVAR Mod. 41 006” is imprinted under the metal rivet. The two-piece metal snap is connected by a rivetted spring. The front piece has the letter “E” inside a diamond shape and the letters “I,M,L” inside individual boxes above the rivet. The back piece has four lines etched on the top and “MADE” on one side and “ITALY” on the other. On the inserted paper name tag is the UIAGM logo; a stylized mountain on the top-third of a segmented globe on a blue background, Above the circle are the letters “UIAGM” and below “IVBV”.The outer ring of the circular logo has these words printed on it “GUIDE DE MONTAGNES GUIDA BERGFUHRER”, in the lhc. The word “Kanada” is centred and below the name “Hans Gmoser”. The lettering and logo are very dark blue on a white paper background and a dark blue box surrounding the information.
Subject
UIAGM
mountain guides
sports
mountains
guiding
climbing
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
103.09.1224
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1980
Material
metal
Catalogue Number
108.04.1114
Description
Ten pitons and ice screws looped together with a wire.
Title
Piton
Date
1950 – 1980
Material
metal
Description
Ten pitons and ice screws looped together with a wire.
Subject
sports
climbing
mountaineering
Alpine Club of Canada
Credit
Gift of Alpine Club of Canada, Canmore, 1985
Catalogue Number
108.04.1114
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955
Material
metal; leather
Catalogue Number
108.04.1149
Description
Piton hammer with rectangular steel head and steel looped handle with thick black leather grip; climbing cord looped through and knotted. A steel shaft bent to loop around to form a handle is soldered onto the steel head. A thick leather piece, dyed black, with no apparent seam, has been fitted ove…
  1 image  
Title
Piton Hammer
Date
1955
Material
metal; leather
Dimensions
21 x 5.5 cm
Description
Piton hammer with rectangular steel head and steel looped handle with thick black leather grip; climbing cord looped through and knotted. A steel shaft bent to loop around to form a handle is soldered onto the steel head. A thick leather piece, dyed black, with no apparent seam, has been fitted over the shaft for gripping. There is a thin piece of climbing rope, blue and white weave, knotted at the end and looped through the shaft for attaching and carrying.
Subject
sports
climbing
mountaineering
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
108.04.1149
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1991
Material
wood; metal; plastic
Catalogue Number
103.09.1142
Description
A wooden plaque with the Alpine Club of Canada’s crest and a relief of the Chateau Lake Louise. The plate on the plaque reads “THANK YOU FOR YOUR GENEROUS SUPPORT OF THE 1991 MOUNTAIN GUIDES’ BALL.”
  1 image  
Title
Plaque
Date
1991
Material
wood; metal; plastic
Description
A wooden plaque with the Alpine Club of Canada’s crest and a relief of the Chateau Lake Louise. The plate on the plaque reads “THANK YOU FOR YOUR GENEROUS SUPPORT OF THE 1991 MOUNTAIN GUIDES’ BALL.”
Subject
sports
climbing
Alpine Club of Canada
Chateau Lake Louise
mountaineering
guiding
Credit
Gift of Alpine Club of Canada, Canmore, 1992
Catalogue Number
103.09.1142
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955 – 1960
Material
metal
Catalogue Number
103.08.1112
Description
Silver pocket flask engraved on front: “To Ernest. A Token Of Our Gratitude from The Lake O’Hara Staff”. Bottom of flask is stamped: “MADE IN ENGLAND. JAMES DIKON & SONS. SHEFFIELD. 71- 12 oz.”
  1 image  
Title
Pocket Flask
Date
1955 – 1960
Material
metal
Dimensions
19.0 x 11.0 cm
Description
Silver pocket flask engraved on front: “To Ernest. A Token Of Our Gratitude from The Lake O’Hara Staff”. Bottom of flask is stamped: “MADE IN ENGLAND. JAMES DIKON & SONS. SHEFFIELD. 71- 12 oz.”
Subject
sports
climbing
packers and guides
Swiss guides
Ernest Feuz
Canadian Pacific Railway
Lake O’Hara Lodge
Credit
Gift of Fred Feuz, Salmon Arm, 1999
Catalogue Number
103.08.1112
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

54 records – page 2 of 3.

Back to Top