Narrow Results By
- 1920s 936
- 1950s 932
- 1900s 868
- 1930s 857
- 1940s 598
- 1910s 565
- 1870s 474
- 1960s 473
- 1890s 362
- 1970s 327
- 1880s 226
- 1980s 145
- 1850s
- 1800s
- 1990s
- 1860s 38
- 1820s 28
- 1830s 15
- 1840s 14
- 1750s
- 1780s 9
- 2000s 9
- 1810s 8
- 1790s 7
- 2010s 7
- 1700s 5
- 2020s 4
- 1600s 2
- 1770s 2
- 1080s 1
- 1300s 1
- 1500s 1
- 1530s 1
- 1550s 1
- 1620s 1
- 1690s 1
- 1720s 1
- 1760s 1
- Date
- 1800 – 1900
- Material
- ivory
- Catalogue Number
- 110.02.0016
- Description
- A small round ivory box constructed of three ivory rings so perfectly carved as to stack together easily to form a single unit; lid with large tear-shaped ivory knob sits inside top ring; two round-headed ivory pins pass through holes in the lip with the shanks protruding to the angles forming base…
1 image
- Title
- Box
- Date
- 1800 – 1900
- Material
- ivory
- Dimensions
- 7.0 x 6.2 cm
- Description
- A small round ivory box constructed of three ivory rings so perfectly carved as to stack together easily to form a single unit; lid with large tear-shaped ivory knob sits inside top ring; two round-headed ivory pins pass through holes in the lip with the shanks protruding to the angles forming base and lip.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 110.02.0016
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Bric-A-Brac Stand Collection
https://archives.whyte.org/en/permalink/artifact102.04.0319%20a-f
- Date
- 1800 – 1890
- Material
- wood
- Catalogue Number
- 102.04.0319 a-f
- Description
- A collection of six short dark brown wooden stands. (a) 2.3 x 9.8 - incised double circle in circular platform top and carved knob trim around its rim. Outward bowed base is elaborately carved through in interwoven knot design between three square spiral motifs, each of which terminates in a small …
1 image
- Title
- Bric-A-Brac Stand Collection
- Date
- 1800 – 1890
- Material
- wood
- Dimensions
- 2.3 cm
- Description
- A collection of six short dark brown wooden stands. (a) 2.3 x 9.8 - incised double circle in circular platform top and carved knob trim around its rim. Outward bowed base is elaborately carved through in interwoven knot design between three square spiral motifs, each of which terminates in a small foot. Underside has circle carved at centre. (b) 2.6 x 5.8 - small lip around top platform, outward bowed base carved through in scrolled vine pattern between solid spaces terminating in three small feet. Marks: on base, red Japeanese writing) (c) 2.6 x 6.7 - double circle inscribed on top platform which is ringed with small lip, smooth outward bowed base with three small feet curving outward, small circle cut in base. Marks: on base, paper label, “605/2” (d) 2.7 x 6.5 - lathe turned with small lip around top platform, smooth outward bowed base with small foot-ring, bottom hollowed inside foot-ring. (e) 1.6 x 5.7 - small raised ring carved around platform top, base flares out slightly and is scroll-shaped along bottom defining three very small feet. (f) 1.6 x 4.5 - small lip around platform top, sharp shoulder of outward bowed based incised with small lines around; scroll carving at bottom defines small feet.
- Subject
- households
- decorative
- Japanese
- E. S. Morse;
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.04.0319 a-f
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Bronze Sculpture
https://archives.whyte.org/en/permalink/artifact107.02.1037
- Date
- 1998 – 2001
- Material
- metal, bronze; wood
- Catalogue Number
- 107.02.1037
- Description
- Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
1 image
- Title
- Bronze Sculpture
- Date
- 1998 – 2001
- Material
- metal, bronze; wood
- Dimensions
- 24.5 x 9.0 x 17.5 cm
- Description
- Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
- Credit
- Gift of Trail Riders of the Canadian Rockies, Calgary, 2002
- Catalogue Number
- 107.02.1037
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- c. 1860
- Material
- metal; antler
- Catalogue Number
- 104.19.1062
- Description
- Long, pointed steel blade is inserted into antler handle and fixed with 3 metal rivets.
1 image
- Title
- Butcher Knife
- Date
- c. 1860
- Material
- metal; antler
- Dimensions
- 33.0 cm
- Description
- Long, pointed steel blade is inserted into antler handle and fixed with 3 metal rivets.
- Subject
- Indigenous
- hunting
- Credit
- Purchased from Alan McClelland, Banff, 1984
- Catalogue Number
- 104.19.1062
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1910
- Material
- wood
- Catalogue Number
- 104.19.0027
- Description
- A round wooden butter mold that is a circular press carved with a handle which passes through a hole in the top of the mold. The press has a thistle and leaf design carved into it.
1 image
- Title
- Butter Mold
- Date
- 1850 – 1910
- Material
- wood
- Dimensions
- 12.5 cm
- Description
- A round wooden butter mold that is a circular press carved with a handle which passes through a hole in the top of the mold. The press has a thistle and leaf design carved into it.
- Subject
- households
- decorative
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.19.0027
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- metal
- Catalogue Number
- 104.20.0661
- Description
- Small, plain, circular plate with wide rim and fairly deep dish area. Stamps on rim include Heraldic rampant lion and "H" "X" "B" separately stamped. Plate base stamped with crest including crown and laurels.
1 image
- Title
- Butter Plate
- Date
- 1800 – 1900
- Material
- metal
- Dimensions
- 1.8 x 18.7 cm
- Description
- Small, plain, circular plate with wide rim and fairly deep dish area. Stamps on rim include Heraldic rampant lion and "H" "X" "B" separately stamped. Plate base stamped with crest including crown and laurels.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.20.0661
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- wood, mahogany; glass; fibre
- Catalogue Number
- 102.03.0029
- Description
- A cabinet with two parts; an upper cabinet that is attached to a lower bureau. The upper cabinet has two glass-front doors and three shelves. The lower bureau has three drawers and a fold-out leaf that can serve as a desk.
1 image
- Title
- Cabinet
- Date
- 1800 – 1900
- Material
- wood, mahogany; glass; fibre
- Dimensions
- 174.0 x 47.5 x 101.5 cm
- Description
- A cabinet with two parts; an upper cabinet that is attached to a lower bureau. The upper cabinet has two glass-front doors and three shelves. The lower bureau has three drawers and a fold-out leaf that can serve as a desk.
- Subject
- households
- furniture
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 102.03.0029
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1925
- Material
- metal
- Catalogue Number
- 104.20.0032
- Description
- An oval silver-plated copper dish with a flared lip. The dish stands on a short pedestal with a square base. The dish has a tall arched handle that is hinged and attached on each side. The basket is decorated with ornate floral trim along the edge of the dish and along the top of the handle.
1 image
- Title
- Cake Basket
- Date
- 1850 – 1925
- Material
- metal
- Dimensions
- 28.0 cm
- Description
- An oval silver-plated copper dish with a flared lip. The dish stands on a short pedestal with a square base. The dish has a tall arched handle that is hinged and attached on each side. The basket is decorated with ornate floral trim along the edge of the dish and along the top of the handle.
- Subject
- households
- social customs
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.20.0032
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1870
- Material
- stone, catlinite; wood; quill; fibre
- Catalogue Number
- 109.02.0014 a,b
- Description
- A quill-wrapped wooden pipe stem with a carved pipestone bowl.a) A long pipe stem made from a hollowed piece of wood wrapped with multi-coloured quills. b) A red-brown right angle pipe bowl carved from pipestone.
1 image
- Title
- Calumet
- Date
- prior to 1870
- Material
- stone, catlinite; wood; quill; fibre
- Dimensions
- 8.5 (bowl) x 54.0 cm
- Description
- A quill-wrapped wooden pipe stem with a carved pipestone bowl.a) A long pipe stem made from a hollowed piece of wood wrapped with multi-coloured quills. b) A red-brown right angle pipe bowl carved from pipestone.
- Subject
- Indigenous, Stoney
- Plains Cree
- Woodland Ojibwa
- Plains Ojibwa
- crafts
- carving
- quillwork
- smoking
- ceremonial
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 109.02.0014 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Catalogue Number
- 104.41.0081 a-d
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
1 image
- Title
- Camera Tripod
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Dimensions
- 28.3 x 28.6 x 138.5 cm
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0081 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800
- Catalogue Number
- 104.41.1125 a-b
- Description
- Two identical metal tripods with burgundy legs attached with white string. Three adjustable knobs are located at the top of the tripod allowing the metal bar inside to be adjusted maximizing the height. The folding and collapsible legs extend away from the vertical center in three sections to a len…
- Title
- Camera Tripod
- Date
- 1800
- Description
- Two identical metal tripods with burgundy legs attached with white string. Three adjustable knobs are located at the top of the tripod allowing the metal bar inside to be adjusted maximizing the height. The folding and collapsible legs extend away from the vertical center in three sections to a length of 54.0 cm. A fourth adjustable knob, located at the bottom of the metal bar and meeting the top of the legs, allows the user to extend the legs of the tripod to the desired height. Each of the four knobs has the maker’s mark inscribed and reads: “ACME- LITE-CHICAGO- ” around the circumference. The feet are at a 45 degree angle and have a rubber stopper on the bottom giving the portable three-legged frame greater stability to resist lateral forces. A tripod may have been used for motion and still photography to prevent movement or to help achieve precise framing of an image.
- Subject
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1125 a-b
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1991
- Material
- metal
- Catalogue Number
- 104.19.0176
- Description
- A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
1 image
- Title
- Can Opener
- Date
- 1991
- Material
- metal
- Dimensions
- 2.0 x 2.0 x 6.5 cm
- Description
- A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
- Subject
- Whyte home
- drinking
- tools
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0176
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Candle Lantern
https://archives.whyte.org/en/permalink/artifact102.05.0050
- Date
- 1850 – 1930
- Material
- metal
- Catalogue Number
- 102.05.0050
- Description
- A rustic-manufacture pierced tin lantern, flat base, cylindrical body, conical top which terminates in a metal hanging flat loop. Cylinder has door which by a simple slot clasp fits over a flange for opening and closing. Pattern on door is made of slits punched out from behind into a star and borde…
1 image
- Title
- Candle Lantern
- Date
- 1850 – 1930
- Material
- metal
- Dimensions
- 32.0 x 16.2 cm
- Description
- A rustic-manufacture pierced tin lantern, flat base, cylindrical body, conical top which terminates in a metal hanging flat loop. Cylinder has door which by a simple slot clasp fits over a flange for opening and closing. Pattern on door is made of slits punched out from behind into a star and border pattern in lines and dots, and a similar pattern is punched out on the rest of the cylinder,the conic top is punched in radial slit lines. Lantern is open at top of cone (about 3 cm.)
- Subject
- households
- decorative
- Dave White
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0050
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1875
- Material
- metal
- Catalogue Number
- 102.05.0076
- Description
- Scissor-like snuffer on three ball supports. Scissor motion opens door on snuffing chamber. In its 19th century usage on longer wicks the opened door would catch the wick, shear it and extinguish it and the burnt portion of the wick would be left in the chamber. Scissor and handle tops have relief …
1 image
- Title
- Candlesnuffer
- Date
- 1800 – 1875
- Material
- metal
- Dimensions
- 4.7 x 6.7 x 18.3 cm
- Description
- Scissor-like snuffer on three ball supports. Scissor motion opens door on snuffing chamber. In its 19th century usage on longer wicks the opened door would catch the wick, shear it and extinguish it and the burnt portion of the wick would be left in the chamber. Scissor and handle tops have relief floral decoration. Chamber top has relief rampant lion. Hallmarks on chamber door include "X", a crown and a cross (?) within crest.
- Subject
- households
- decorative
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0076
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1900
- Material
- metal, copper; metal, silver
- Catalogue Number
- 102.05.0003 a,b
- Description
- A pair of candlesticks each with a square pyramidal shaped base of copper with an overlaid silver design. Each candlestick has a square stem and a square top with a round candleholder.
1 image
- Title
- Candlestick
- Date
- 1850 – 1900
- Material
- metal, copper; metal, silver
- Dimensions
- 11.0 x 8.7 (base) x 8.7 (base) cm
- Description
- A pair of candlesticks each with a square pyramidal shaped base of copper with an overlaid silver design. Each candlestick has a square stem and a square top with a round candleholder.
- Subject
- households
- decorative
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 102.05.0003 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1910
- Material
- metal
- Catalogue Number
- 102.05.0007 a,b
- Description
- A short candlestick (a) with saucer base and a handle. The saucer has an inscribed design, and the candleholder is fluted with a flaring lip. The candlesnuffer ( b) is a blossom shape and attaches to the candlestick’s handle.
1 image
- Title
- Candlestick
- Date
- 1850 – 1910
- Material
- metal
- Dimensions
- 9.0 (a); 9.5 (b) cm
- Description
- A short candlestick (a) with saucer base and a handle. The saucer has an inscribed design, and the candleholder is fluted with a flaring lip. The candlesnuffer ( b) is a blossom shape and attaches to the candlestick’s handle.
- Subject
- households
- decorative
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 102.05.0007 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1759 – 1759
- Material
- wood; ivory; metal, brass; metal, silver
- Catalogue Number
- 103.08.0110
- Description
- A straight walking stick with an ivory knob handle joined to the wooden stick with a silver ring. The bottom tip of the cane is covered with brass. There are holes at either side of the top of the cane for a hand strap. The silver ring is inscribed with “Fort Dummer 1759 James W. Brown”.
1 image
- Title
- Cane
- Date
- 1759 – 1759
- Material
- wood; ivory; metal, brass; metal, silver
- Dimensions
- 81.0 cm
- Description
- A straight walking stick with an ivory knob handle joined to the wooden stick with a silver ring. The bottom tip of the cane is covered with brass. There are holes at either side of the top of the cane for a hand strap. The silver ring is inscribed with “Fort Dummer 1759 James W. Brown”.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 103.08.0110
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1750 – 1800
- Material
- metal
- Catalogue Number
- 104.08.0005
- Description
- Small, heavily rusted iron ball.
1 image
- Title
- Cannonball
- Date
- 1750 – 1800
- Material
- metal
- Dimensions
- 3.7 x 3.7 cm
- Description
- Small, heavily rusted iron ball.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.08.0005
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- fruit, gourd; wood; fibre
- Catalogue Number
- 103.08.0157
- Description
- A canteen made from a circular dried gourd that has a wooden neck screwed in to one side. There are also two twisted basket loops attached to opposide sides of the canteen used to hold a long green carrying strap. The gourd has lettering printed on one side that reads “Souvr...de Chamounix...Mon…
1 image
- Title
- Canteen
- Date
- 1800 – 1900
- Material
- fruit, gourd; wood; fibre
- Description
- A canteen made from a circular dried gourd that has a wooden neck screwed in to one side. There are also two twisted basket loops attached to opposide sides of the canteen used to hold a long green carrying strap. The gourd has lettering printed on one side that reads “Souvr...de Chamounix...Mont Blanc..Hote H.P. de Savoie”. The lettering is around a French horn with a yellow lyre at its centre.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 103.08.0157
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Carpentry Plane Set
https://archives.whyte.org/en/permalink/artifact104.49.0006%20a-q
- Date
- 1800 – 1825
- Material
- wood; metal
- Catalogue Number
- 104.49.0006 a-q
- Description
- Set of 17 wooden carpenter's planes, includes bench planes, block planes and moulding planes. 7 bench planes, heavy bodies made of blocks of wood, some with simple totes (handles) curved to fit the shape of the hand, some with double totes shaped like a saw handle. (a) trying plane , double tote…
1 image
- Title
- Carpentry Plane Set
- Date
- 1800 – 1825
- Material
- wood; metal
- Description
- Set of 17 wooden carpenter's planes, includes bench planes, block planes and moulding planes. 7 bench planes, heavy bodies made of blocks of wood, some with simple totes (handles) curved to fit the shape of the hand, some with double totes shaped like a saw handle. (a) trying plane , double tote (b) trying plane (c) jack ? plane (d) jack ? plane (e) jack ? plane (f) smoothing plane (g) compass plane, 4 rabbet type planes (h) crosscut, banding dado (i) rabbet (j) plow plane (k) tongue and groove. 6 moulding planes (l) double dado (m) hollow (n) quarter round (o) bead moulding (p) sash (?) moulding (q) side (?) moulding See extra pages re: tools in the catalogue book pk
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.49.0006 a-q
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.