Skip header and navigation

Narrow Results By

204 records – page 2 of 11.

Date
1840 – 1850
Material
wood; glass; metal
Catalogue Number
104.41.0005 a,b
Description
(a) Large dark brown wooden box camera which is constructed so that back half of camera slides into front half to focus and is secured in place by means of a brass thumbscrew into a slot in the base. Large brass lens screwed over aperture hole at centre of front side of wooden box, square glass pla…
  1 image  
Title
Box Camera
Date
1840 – 1850
Material
wood; glass; metal
Dimensions
25.2 x 24.0 x 42.3 cm
Description
(a) Large dark brown wooden box camera which is constructed so that back half of camera slides into front half to focus and is secured in place by means of a brass thumbscrew into a slot in the base. Large brass lens screwed over aperture hole at centre of front side of wooden box, square glass plate set into wooden frame slides into slot at back of camera. (b) a separate plateholder of the same size has hinged door on back of frame which opens to insert black metal film sheath (Eastman Kodak), and front of frame slides out by pulling on metal ring at top to expose film. Note: wood cracking and separated at joints, chipped at lower front corners with large chunk of wood out of lower right, plateholder cracked across door and on one side of top.
Subject
households
hobbies
photography
J.D. Curren
PW
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.41.0005 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1998 – 2001
Material
metal, bronze; wood
Catalogue Number
107.02.1037
Description
Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
  1 image  
Title
Bronze Sculpture
Date
1998 – 2001
Material
metal, bronze; wood
Dimensions
24.5 x 9.0 x 17.5 cm
Description
Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
Subject
riding
artists
horses
Trail Riders of the Canadian Rockies
Malcolm MacKenzie
Credit
Gift of Trail Riders of the Canadian Rockies, Calgary, 2002
Catalogue Number
107.02.1037
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1840 – 1875
Material
metal; stone
Catalogue Number
103.01.0188
Description
An openwork, red and green enamelled silver pin with red leaves and green gemstones. Symmetrical shape of tiny bush with tiny silver leaves, blossoms and silver balls. Single, large .5 cm dia. red garnet at top with silver leaves forming heart shape below, having large, square, green zircons .4 cm…
  1 image  
Title
Brooch
Date
1840 – 1875
Material
metal; stone
Dimensions
3.1 x 1.0 x 3.3 cm
Description
An openwork, red and green enamelled silver pin with red leaves and green gemstones. Symmetrical shape of tiny bush with tiny silver leaves, blossoms and silver balls. Single, large .5 cm dia. red garnet at top with silver leaves forming heart shape below, having large, square, green zircons .4 cm square, below and on either side. At each side of lower zircon are two flowing banner like streamers enamelled red and green. Back is flat silhouette of front, with circular holes through at points where jewels and silver balls are attached. Hinged pin spike across back fastens under curled hook clasp.
Subject
Whyte home
households
adornment
CR
Catharine Robb
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.01.0188
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
c. 1860
Material
metal; antler
Catalogue Number
104.19.1062
Description
Long, pointed steel blade is inserted into antler handle and fixed with 3 metal rivets.
  1 image  
Title
Butcher Knife
Date
c. 1860
Material
metal; antler
Dimensions
33.0 cm
Description
Long, pointed steel blade is inserted into antler handle and fixed with 3 metal rivets.
Subject
Indigenous
hunting
Credit
Purchased from Alan McClelland, Banff, 1984
Catalogue Number
104.19.1062
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1850 – 1910
Material
wood
Catalogue Number
104.19.0027
Description
A round wooden butter mold that is a circular press carved with a handle which passes through a hole in the top of the mold. The press has a thistle and leaf design carved into it.
  1 image  
Title
Butter Mold
Date
1850 – 1910
Material
wood
Dimensions
12.5 cm
Description
A round wooden butter mold that is a circular press carved with a handle which passes through a hole in the top of the mold. The press has a thistle and leaf design carved into it.
Subject
households
decorative
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
104.19.0027
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1840 – 1875
Material
metal
Catalogue Number
104.19.0002
Description
An oval silver (Sheffield Plate) tea caddy with a lid. The lid has a large round knob. There is decorative trim around the top edge of the caddy and also around the top edge of the knob.
  1 image  
Title
Caddy
Date
1840 – 1875
Material
metal
Dimensions
10.5 cm
Description
An oval silver (Sheffield Plate) tea caddy with a lid. The lid has a large round knob. There is decorative trim around the top edge of the caddy and also around the top edge of the knob.
Subject
social cusotms
households
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
104.19.0002
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1840 – 1900
Material
metal
Catalogue Number
104.19.0003
Description
A square caddy of silver plate over copper. The caddy has a high lid with a rounded top.
  1 image  
Title
Caddy
Date
1840 – 1900
Material
metal
Dimensions
10.0 x 9.0 cm
Description
A square caddy of silver plate over copper. The caddy has a high lid with a rounded top.
Subject
social customs
households
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
104.19.0003
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1850 – 1925
Material
metal
Catalogue Number
104.20.0032
Description
An oval silver-plated copper dish with a flared lip. The dish stands on a short pedestal with a square base. The dish has a tall arched handle that is hinged and attached on each side. The basket is decorated with ornate floral trim along the edge of the dish and along the top of the handle.
  1 image  
Title
Cake Basket
Date
1850 – 1925
Material
metal
Dimensions
28.0 cm
Description
An oval silver-plated copper dish with a flared lip. The dish stands on a short pedestal with a square base. The dish has a tall arched handle that is hinged and attached on each side. The basket is decorated with ornate floral trim along the edge of the dish and along the top of the handle.
Subject
households
social customs
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
104.20.0032
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1870
Material
stone, catlinite; wood; quill; fibre
Catalogue Number
109.02.0014 a,b
Description
A quill-wrapped wooden pipe stem with a carved pipestone bowl.a) A long pipe stem made from a hollowed piece of wood wrapped with multi-coloured quills. b) A red-brown right angle pipe bowl carved from pipestone.
  1 image  
Title
Calumet
Date
prior to 1870
Material
stone, catlinite; wood; quill; fibre
Dimensions
8.5 (bowl) x 54.0 cm
Description
A quill-wrapped wooden pipe stem with a carved pipestone bowl.a) A long pipe stem made from a hollowed piece of wood wrapped with multi-coloured quills. b) A red-brown right angle pipe bowl carved from pipestone.
Subject
Indigenous, Stoney
Plains Cree
Woodland Ojibwa
Plains Ojibwa
crafts
carving
quillwork
smoking
ceremonial
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
109.02.0014 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1840 – 1875
Material
shell; metal
Catalogue Number
103.01.0126
Description
An oval cameo of mother of pearl on brownish background. Luminous carving of woman's profile. Fat oval background of iridescent abalone shell. Simple oval setting forms plain brass ? frame around with long hinged pin spike horizontally across back fastening under curled hook clasp on opposite side.
  1 image  
Title
Cameo Brooch
Date
1840 – 1875
Material
shell; metal
Dimensions
1.3 x 2.8 x 3.4 cm
Description
An oval cameo of mother of pearl on brownish background. Luminous carving of woman's profile. Fat oval background of iridescent abalone shell. Simple oval setting forms plain brass ? frame around with long hinged pin spike horizontally across back fastening under curled hook clasp on opposite side.
Subject
Whyte home
households
adornment
Edith Morse Robb
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.01.0126
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
2024
Catalogue Number
104.41.0287a-m
Description
Custom red brown camera case containing a camera, recorder, and various equipment and accessories.a) Red brown suitcase that has been customized to carry cameras and their equipment. The outside has reinforced leather corners and silver hardware. The outside has the initials “J. R. G.” on the top a…
  1 image  
Title
Camera; Equipment Case
Date
2024
Dimensions
13.5 x 41.0 cm
Description
Custom red brown camera case containing a camera, recorder, and various equipment and accessories.a) Red brown suitcase that has been customized to carry cameras and their equipment. The outside has reinforced leather corners and silver hardware. The outside has the initials “J. R. G.” on the top and bottom sides, as well as under the handle. Inside, the case has a brown plaid lining. The bottom of the case has been fitted with a custom made wood, cream coloured apparatus that is designed to hold (c). It comes apart into two pieces - the base, which is not removable, and the lid, which slides out to the right once it has been unhooked from the latch built into the base n the left hand side. The lid of the suitcase reads “J. R. GRICE / 9920 - 75 ST / EDMONTON / ALBERTA”. The foam on the apparatus has worn off, leaving black dust like particles in the suitcase. There are a set of two keys hanging from a brown strap connecting the lid to the base in the center of the suitcase.b) Silver and black camera in a brown leather case. The camera is secured in the case with a wide, flat screw at the base. The camera also comes with its original document outlining the features and instructions of the camera. The camera itself is a Olympus Chrome Six. According to the document, the camera was used to produce “ (12) 6x6cm photos or (16) 4.5x6cm photos on a roll of 120 film”. The camera is black leather with a silver body. There are two silver knobs on the base. The top has four knobs, a viewfinder, and a mount for flash. The smallest knob next to the viewfinder is used to release the lens, which opens from a square panel in the front. The lens is a coated Olympus Zuiko lens. The brown case is Olympus brand and is custom fitted to the camera model. It opens from the top and has two snaps that secure it to the base of the case. A small flap can be opened to allow the camera to be used while remaining in the case. The strap that connects the top of the case to the bottom reads “J. R. GRICE / 9920 - 75 ST / EDMONTON / ALBERTA”. There is a short, thin strap that attaches to either side of the case by metal hardware - one side is broken, the leather has split. The case shows some wear - the connecting middle strap has a large horizontal tear at the seam, while the lens flap has a smaller horizontal tear on the right hand side. c) Green, silver and black recorder that has a strap, brown cloth case and spare reel. The brand on the case, recorder and strap is labeled as Sankyo. The recorder is a muted green colour, with black and silver components. It has three lenses on the front with metal lens caps, The viewfinder is clear. The strap is made of silver components and brown braided cord. The case is brown cloth with a gold zipper, with Sankyo Japan embossed on the side. The reel is made of grey plastic and branded as Kodak, but is believed to work with the recorder. d) Black and white stop watch on a red cord. Was likely used to time exposure times. e) Viewfinder in its original box. Brand is “Watameter”.f) Light meter on a silver snake-chain in its original box. Still operable.g) Blower brush in its original box. h) Handmade camera mount made from wood with attached trigger. There is also a spare trigger wire. i) Film reel it its original box. Reel is empty.j) Bag of miscellaneous bulbs, two of which are for a Sylvanus projector. One is brand new in box. k) Red cloth bag. Front reads “BeautifFeel / Design that feels good” while the bottom says “every woman deserves a pair”l) Miscellaneous papers detailing movie film features and instructions. Have been folded, so they are creased.
Subject
cinema
photography
camera
camera equipment
camera accessories
Credit
Gift of Janet Grice, Banff, 2024
Catalogue Number
104.41.0287a-m
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1995
Material
leather; metal; wood; plastic
Catalogue Number
104.41.0081 a-d
Description
Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
  1 image  
Title
Camera Tripod
Date
1995
Material
leather; metal; wood; plastic
Dimensions
28.3 x 28.6 x 138.5 cm
Description
Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
Subject
Nicholas Morant
photography
camera equipment
Canadian Pacific Railway
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0081 a-d
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
2024
Material
metal
Catalogue Number
104.41.0288
Description
Black and silver metal tripod used to mount a camera or recorder. Legs are black with silver pointed feet. Stamped “MADE IN GERMANY”
  1 image  
Title
Camera Tripod
Date
2024
Material
metal
Dimensions
44.5 x 4.0 cm
Description
Black and silver metal tripod used to mount a camera or recorder. Legs are black with silver pointed feet. Stamped “MADE IN GERMANY”
Subject
photography
cinema
cinematography
recorder
Credit
Gift of Janet Grice, Banff, 2024
Catalogue Number
104.41.0288
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1991
Material
metal
Catalogue Number
104.19.0176
Description
A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
  1 image  
Title
Can Opener
Date
1991
Material
metal
Dimensions
2.0 x 2.0 x 6.5 cm
Description
A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
Subject
Whyte home
drinking
tools
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.19.0176
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1850 – 1930
Material
metal
Catalogue Number
102.05.0050
Description
A rustic-manufacture pierced tin lantern, flat base, cylindrical body, conical top which terminates in a metal hanging flat loop. Cylinder has door which by a simple slot clasp fits over a flange for opening and closing. Pattern on door is made of slits punched out from behind into a star and borde…
  1 image  
Title
Candle Lantern
Date
1850 – 1930
Material
metal
Dimensions
32.0 x 16.2 cm
Description
A rustic-manufacture pierced tin lantern, flat base, cylindrical body, conical top which terminates in a metal hanging flat loop. Cylinder has door which by a simple slot clasp fits over a flange for opening and closing. Pattern on door is made of slits punched out from behind into a star and border pattern in lines and dots, and a similar pattern is punched out on the rest of the cylinder,the conic top is punched in radial slit lines. Lantern is open at top of cone (about 3 cm.)
Subject
households
decorative
Dave White
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
102.05.0050
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1850 – 1900
Material
metal, copper; metal, silver
Catalogue Number
102.05.0003 a,b
Description
A pair of candlesticks each with a square pyramidal shaped base of copper with an overlaid silver design. Each candlestick has a square stem and a square top with a round candleholder.
  1 image  
Title
Candlestick
Date
1850 – 1900
Material
metal, copper; metal, silver
Dimensions
11.0 x 8.7 (base) x 8.7 (base) cm
Description
A pair of candlesticks each with a square pyramidal shaped base of copper with an overlaid silver design. Each candlestick has a square stem and a square top with a round candleholder.
Subject
households
decorative
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.05.0003 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1850 – 1910
Material
metal
Catalogue Number
102.05.0007 a,b
Description
A short candlestick (a) with saucer base and a handle. The saucer has an inscribed design, and the candleholder is fluted with a flaring lip. The candlesnuffer ( b) is a blossom shape and attaches to the candlestick’s handle.
  1 image  
Title
Candlestick
Date
1850 – 1910
Material
metal
Dimensions
9.0 (a); 9.5 (b) cm
Description
A short candlestick (a) with saucer base and a handle. The saucer has an inscribed design, and the candleholder is fluted with a flaring lip. The candlesnuffer ( b) is a blossom shape and attaches to the candlestick’s handle.
Subject
households
decorative
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.05.0007 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1759 – 1759
Material
wood; ivory; metal, brass; metal, silver
Catalogue Number
103.08.0110
Description
A straight walking stick with an ivory knob handle joined to the wooden stick with a silver ring. The bottom tip of the cane is covered with brass. There are holes at either side of the top of the cane for a hand strap. The silver ring is inscribed with “Fort Dummer 1759 James W. Brown”.
  1 image  
Title
Cane
Date
1759 – 1759
Material
wood; ivory; metal, brass; metal, silver
Dimensions
81.0 cm
Description
A straight walking stick with an ivory knob handle joined to the wooden stick with a silver ring. The bottom tip of the cane is covered with brass. There are holes at either side of the top of the cane for a hand strap. The silver ring is inscribed with “Fort Dummer 1759 James W. Brown”.
Subject
assistive device
social customs
Maria Moore
Philip Moore
James W. Brown
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
103.08.0110
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1750 – 1800
Material
metal
Catalogue Number
104.08.0005
Description
Small, heavily rusted iron ball.
  1 image  
Title
Cannonball
Date
1750 – 1800
Material
metal
Dimensions
3.7 x 3.7 cm
Description
Small, heavily rusted iron ball.
Subject
warfare
fighting
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.08.0005
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1990
Material
metal ; fibre
Catalogue Number
105.06.1029
Description
Official Cross pen used at incorporation ceremonies, Town of Banff, Town Office, January 1, 1990 and Whyte Museum of the Canadian Rockies January 27, 1990. Engraved on the side"Town of Banff Jan 1, 1990". Clam shell case. Underneath velvety presentation piece is a small set of instructions tucked…
  1 image  
Title
Ceremonial Pen
Date
1990
Material
metal ; fibre
Dimensions
13.4 cm
Description
Official Cross pen used at incorporation ceremonies, Town of Banff, Town Office, January 1, 1990 and Whyte Museum of the Canadian Rockies January 27, 1990. Engraved on the side"Town of Banff Jan 1, 1990". Clam shell case. Underneath velvety presentation piece is a small set of instructions tucked into a layer of beige paper.
Subject
incorporation
town
Town of Banff
Credit
Gift of Town of Banff, Banff, 1990
Catalogue Number
105.06.1029
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

204 records – page 2 of 11.

Back to Top