Narrow Results By
Belt Equipment Holder
https://archives.whyte.org/en/permalink/artifact108.04.1088
- Date
- 1970 – 1990
- Material
- skin; metal
- Catalogue Number
- 108.04.1088
- Description
- A tanned leather, tool holder that attaches to a belt; used for mountaineering. There are four rivetted holes, which keeps the pieces of leather together, creating an opening to slip a belt through. There is an etched mountain on the front with a climbing tool in front of it.
1 image
- Title
- Belt Equipment Holder
- Date
- 1970 – 1990
- Material
- skin; metal
- Dimensions
- 5.0 x 9.0 cm
- Description
- A tanned leather, tool holder that attaches to a belt; used for mountaineering. There are four rivetted holes, which keeps the pieces of leather together, creating an opening to slip a belt through. There is an etched mountain on the front with a climbing tool in front of it.
- Subject
- sports
- climbing
- mountaineering
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1088
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1840 – 1850
- Material
- wood; glass; metal
- Catalogue Number
- 104.41.0005 a,b
- Description
- (a) Large dark brown wooden box camera which is constructed so that back half of camera slides into front half to focus and is secured in place by means of a brass thumbscrew into a slot in the base. Large brass lens screwed over aperture hole at centre of front side of wooden box, square glass pla…
1 image
- Title
- Box Camera
- Date
- 1840 – 1850
- Material
- wood; glass; metal
- Dimensions
- 25.2 x 24.0 x 42.3 cm
- Description
- (a) Large dark brown wooden box camera which is constructed so that back half of camera slides into front half to focus and is secured in place by means of a brass thumbscrew into a slot in the base. Large brass lens screwed over aperture hole at centre of front side of wooden box, square glass plate set into wooden frame slides into slot at back of camera. (b) a separate plateholder of the same size has hinged door on back of frame which opens to insert black metal film sheath (Eastman Kodak), and front of frame slides out by pulling on metal ring at top to expose film. Note: wood cracking and separated at joints, chipped at lower front corners with large chunk of wood out of lower right, plateholder cracked across door and on one side of top.
- Subject
- households
- hobbies
- photography
- J.D. Curren
- PW
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.41.0005 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1991
- Material
- metal; plastic
- Catalogue Number
- 104.41.0254
- Description
- An Eastman Kodak Co. Camera , found in an avalanche slope behind Mount Edith on June 15 1991. The camera looks burnt, it is completely grey and rusted, many pieces are broken. It is housed in a Ziploc bag which catches the rust and corroded metal. There is still a roll of film in the camera.
1 image
- Title
- Camera
- Date
- prior to 1991
- Material
- metal; plastic
- Dimensions
- 6.8 x 11.5 x 5.1 cm
- Description
- An Eastman Kodak Co. Camera , found in an avalanche slope behind Mount Edith on June 15 1991. The camera looks burnt, it is completely grey and rusted, many pieces are broken. It is housed in a Ziploc bag which catches the rust and corroded metal. There is still a roll of film in the camera.
- Subject
- photography
- camera
- avalanche
- found item
- Mount Edith
- Credit
- Gift of Adrian Phillips, Calgary, 1991
- Catalogue Number
- 104.41.0254
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1976 – 1981
- Material
- metal; plastic; glass
- Catalogue Number
- 104.41.0256
- Description
- A small-sized, black and silver mechanical camera by Agfa. The top of the camera features text that reads “tele” “AGFAMATIC 2008” “sensor”, on the right side is a large red button which release the shutter [this is a unique characteristic to Agfa cameras during this period] with a metal ring around…
1 image
- Title
- Camera
- Date
- 1976 – 1981
- Material
- metal; plastic; glass
- Dimensions
- 2.5 x 11.7 x 5.3 cm
- Description
- A small-sized, black and silver mechanical camera by Agfa. The top of the camera features text that reads “tele” “AGFAMATIC 2008” “sensor”, on the right side is a large red button which release the shutter [this is a unique characteristic to Agfa cameras during this period] with a metal ring around it, above the shutter release is two switches, one switch features symbols of a cloud and sun and the other switch features a small arrow when slide right it’ll point to “tele”. On the right side of the camera is a metal chain wrist strap. The back of the camera, where the viewfinder is, is narrow and features the viewfinder on the left side (on the silver part) and a clear window with to see into where the film is loaded with text that reads “AGFACOLOUR 110”. To load the camera there is another slide switch near the top of the back that release the panel. On the bottom of the camera is one slide switch that when slid to the left releases the silver part of the camera to reveal the viewfinder and allows the user to photograph. After each exposure the user slides the silver mechanism back into the black body of the camera [this is how the film advances]. The front of the camera features branding, from left to right the text reads “AGFAMATIC 2008” “tele pocket” “Agfa” in cursive font inside a diamond. When the camera is ready to use the front of the camera reveals the lens with white text that reads “COLOR AGNAR” and the viewfinder, on the back the viewfinder is useable.
- Subject
- film photography
- camera
- photography
- Whyte
- Whyte Home
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.41.0256
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1971 – 1973
- Material
- wood; metal; plastic; paper; leather;
- Catalogue Number
- 104.41.0154 a-e
- Description
- Wooden case with buffer runners on the front, back, and along the bottom - the hinged lid has a leather handle and is held closed with two small screws. Throughout the exterior are various shipping stickers, usually from CP Rail, “34” is stenciled on all sides, and a wooden name plate with Nicholas…
1 image
- Title
- Camera Case
- Date
- 1971 – 1973
- Material
- wood; metal; plastic; paper; leather;
- Dimensions
- 30.0 x 36.5 x 40.5 cm
- Description
- Wooden case with buffer runners on the front, back, and along the bottom - the hinged lid has a leather handle and is held closed with two small screws. Throughout the exterior are various shipping stickers, usually from CP Rail, “34” is stenciled on all sides, and a wooden name plate with Nicholas Morant’s information is nailed to the lid. Morant’s information is also stamped in red ink on the inside of the lid, along with a Linhof sticker.Inside the case is a Linhof Aero Technika camera - a camera used in aerial photography - as well as two bundles of Kodak gelatin filters in plastic bags, a viewfinder attachment housed in a black and yellow cardboard box, two plastic-frame Linhof filter attachments in individual fabric bags housed inside a cigar box, and two short hook links - one metal clasps attached by cord and one open hooks attached with a metal chain. The camera is housed inside a pale grey metal case that leaves the back exposed - the section of housing that extends over the lens can be removed, but has small openings throughout in order to access it - another opening along the top at the very front of the lens housing allows the plastic-framed filter to be slid in. On either side of the camera are large black plastic hand holds - the left side one has an extra leather strap that fits over the back of the hand. Fitted into the left-hand grip is a remote trigger.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0154 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Camera Equipment Case
https://archives.whyte.org/en/permalink/artifact104.41.0096%20a-g
- Date
- 1970 – 1985
- Material
- leather; wood; metal; fabric; plastic; glass
- Catalogue Number
- 104.41.0096 a-g
- Description
- Brown hard-sided travel case with metal caps on the corners, reinforcing along all edges, wooden runners parallel horizontally along the long sides of the case, and hinged lid with three metal clasps - the centre one has a keyhole. The interior of the case is divided into five compartments, the lar…
1 image
- Title
- Camera Equipment Case
- Date
- 1970 – 1985
- Material
- leather; wood; metal; fabric; plastic; glass
- Dimensions
- 31.0 x 30.2 x 59.5 cm
- Description
- Brown hard-sided travel case with metal caps on the corners, reinforcing along all edges, wooden runners parallel horizontally along the long sides of the case, and hinged lid with three metal clasps - the centre one has a keyhole. The interior of the case is divided into five compartments, the largest centre one has a false bottom accessed by a leather pull tab. There is a square of padding set into the centre of the lid, three equipment manuals are tucked into the right-hand side and the paper one is stuck. Inside the box is a 19.6x24.0x27.1 cm black box with a brown leather strap attached to the sides, a black leather handle on the lid, and a locking metal clasp on the hinged lid. This box is lined with blue velvet and contains various small pieces of camera equipment. Includes: power cord in a yellow fabric bag, micro screwdrivers in a yellow fabric bag, a metal and wood bracket in a white fabric bag, a “BRAUN” digital flash in a yellow fabric bag, an empty blue fabric bag, four metal Agfa film canisters (empty), assorted spacers and brackets, two keys (one in a paper envelope labelled “CASE KEY” in black ink), and various manuals in a plastic sleeve. Also inside the main case are two hard black lens cases - the larger one has a piece of masking tape on the bottom with “400” written in faded black ink and the smaller one has a piece of masking tape on the lid with “200” written in black ink - a metal and wood handle, a circular black plastic case with a black plastic lens cap inside, and a yellow filter in a clear plastic case. Both lens cases manufactured by “ASAHI OPT CO. JAPAN” as noted on the bottoms.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0096 a-g
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1975
- Material
- leather; metal; glass; fabric; plastic
- Catalogue Number
- 104.41.1281 a-e
- Description
- a) Asahi lens, black metallic cylinder engraved in white on top ring: “Super-Multi-Coated TAKUMAR / 6x7 1:3.5/55 5415794 / ASAHI OPT. CO., JAPAN”; screw mountedb) black plastic lens cap, textured on the top, labeled with with silver letters in relief encircling the brand logo: “TAKUMAR LENS FOR ASA…
1 image
- Title
- Camera Lens
- Date
- 1975
- Material
- leather; metal; glass; fabric; plastic
- Dimensions
- 12.5 cm
- Description
- a) Asahi lens, black metallic cylinder engraved in white on top ring: “Super-Multi-Coated TAKUMAR / 6x7 1:3.5/55 5415794 / ASAHI OPT. CO., JAPAN”; screw mountedb) black plastic lens cap, textured on the top, labeled with with silver letters in relief encircling the brand logo: “TAKUMAR LENS FOR ASAHI PENTAX / ASAHI OPT. CO., LTD.”c) black plastic screw mount cap with a red dot on the side, labeled with letters in relief: “TAKUMAR / ASAHI OPT. CO., JAPAN”d) original black leather cylindrical box, with shoulder strap attached by two eyelets; lid fastened by a press button on a strip; stamped at the top: “TAKUMAR 3.5/55 / FOR ASAHI PENTAX 6X7”; piece of white tape with handwritten “WA” in black in the centre; red velvet inside lininge) black round hard plastic box with ridged and textured lid with embossed label on the bottom: “TAKUMAR / ASAHI OPT. CO. JAPAN”
- Subject
- Nicholas Morant
- photography
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1281 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1970 – 1990
- Material
- metal
- Catalogue Number
- 108.04.1081 a-d
- Description
- Four aluminum carabiners linked together, a combination of spring latch loaded closure system: (a) a D-ring aluminum carabiner (10.0x4.5cm high) with non-locking gate mechanism on the gate; on one side engraved “H” and then raised in block lettering “BREVETTE S G D G”, and then “G” engraved, on op…
1 image
- Title
- Carabiner
- Date
- 1970 – 1990
- Material
- metal
- Description
- Four aluminum carabiners linked together, a combination of spring latch loaded closure system: (a) a D-ring aluminum carabiner (10.0x4.5cm high) with non-locking gate mechanism on the gate; on one side engraved “H” and then raised in block lettering “BREVETTE S G D G”, and then “G” engraved, on opposite side in raised lettering, “P. ALLAIN” on the opposite side.(b) a D-ring aluminum carabiner (10.5x5.0cm high) with non-locking gate mechanism; on one side engraved “H” and then in raised block lettering “BREVETTE S G D G”, and then “G”, on opposite side in raised lettering, “P. ALLAIN 1600 Kg” on the opposite side.(c) An oval-shaped aluminum carabiner (10.0x5.0cm high) with non-locking gate mechanism; “BEDAYN CALIFORNIA” engraved on side.(d) a D-ring aluminum carabiner (11.5.x6.0cm high) with a screw-locking ring mechanism on the gate; on one side engraved “H G”
- Subject
- sports
- climbing
- mountaineering
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1081 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1970 – 1990
- Material
- fibre; metal
- Catalogue Number
- 108.04.1084 a-c
- Description
- Three small rope ladders with metal bars for steps; two ladders are the same type and appear to be handmade:(a) (118.5cm with nylon cord extension 168.0) Three metal bars with thick white nylon rope threaded through the holes in the bars and tied in knots. There is a metal hook (written in scipt “C…
1 image
- Title
- Climbing Ladder
- Date
- 1970 – 1990
- Material
- fibre; metal
- Description
- Three small rope ladders with metal bars for steps; two ladders are the same type and appear to be handmade:(a) (118.5cm with nylon cord extension 168.0) Three metal bars with thick white nylon rope threaded through the holes in the bars and tied in knots. There is a metal hook (written in scipt “Charlet-Maser”) with a hole in the top and one in the bottom where the rope is looped through. There are remnants of red lettering on the inside the first bar ”ISER AN .032” followed by a star inside a circle.(b) Three metal bars with thick white nylon rope threaded through the holes in the bars and tied in knots. There is a metal hook with a hole in the top through which a thin blue and white nylon cord is looped through and knotted and one in the bottom where white, heavier rope is looped through and then knotted. (c) The third ladder consists of three aluminum bars with white, light nylon rope looped through the holes at either end and tied. Machine engraved on the side of each bar “TRADE, logo, MARK” and underneath “TOP.S. ALPINE EQUIPMENT”.
- Subject
- sports
- climbing
- mountaineering
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1084 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1990
- Material
- fibre; metal
- Catalogue Number
- 106.04.1041 a-g
- Description
- 2 pieces of rescue rope, one long, other is shorter, with pulleys, carabiners and one locking device.
- Title
- Climbing Rope
- Date
- prior to 1990
- Material
- fibre; metal
- Description
- 2 pieces of rescue rope, one long, other is shorter, with pulleys, carabiners and one locking device.
- Credit
- Gift of anonymous, 1992
- Catalogue Number
- 106.04.1041 a-g
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Colour Filters
https://archives.whyte.org/en/permalink/artifact104.41.0112
- Date
- 1975 – 1989
- Material
- plastic; paper
- Catalogue Number
- 104.41.0112
- Description
- One dark purple and clear yellow plastic box containing five different coloured filters, instruction manual, and a red fabric cloth. The lid is attached to the body of the box with a strip of clear tape.DuPont de Nemours, Inc. developed various chemicals and polymers throughout the 19th and 20th ce…
1 image
- Title
- Colour Filters
- Date
- 1975 – 1989
- Material
- plastic; paper
- Dimensions
- 8.2 x 5.3 x 7.3 cm
- Description
- One dark purple and clear yellow plastic box containing five different coloured filters, instruction manual, and a red fabric cloth. The lid is attached to the body of the box with a strip of clear tape.DuPont de Nemours, Inc. developed various chemicals and polymers throughout the 19th and 20th centuries. The box contains “plastic FILTERS for VARIGAM PAPER” used during the development of photographs. Each filter is numbered 1-10, but 5 are missing leaving only 1, 3, 5, 7, and 10.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0112
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1840 – 1880
- Material
- metal
- Catalogue Number
- 105.02.0010
- Description
- A daguerreotype of a woman, wearing a long dress, standing behing a small table with a man seated beside the table. A large window is in the background. The plate has a painted gold arched border around the picture.
1 image
- Title
- Daguerreotype
- Date
- 1840 – 1880
- Material
- metal
- Dimensions
- 6.8 x 5.6 cm
- Description
- A daguerreotype of a woman, wearing a long dress, standing behing a small table with a man seated beside the table. A large window is in the background. The plate has a painted gold arched border around the picture.
- Subject
- photography
- households
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 105.02.0010
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Daypack Backpack
https://archives.whyte.org/en/permalink/artifact103.08.1135
- Date
- 1979
- Material
- canvas; leather; metal; fabric
- Catalogue Number
- 103.08.1135
- Description
- A well-made green canvas rucksack with leather straps and metal buckles. It has a drawstring closure with metal grommets through which a woven cord is passed through and tied. The flap is a separate piece of canvas sewn onto the sack which is darted and rounded to fit neatly over the top of the pac…
1 image
- Title
- Daypack Backpack
- Date
- 1979
- Material
- canvas; leather; metal; fabric
- Dimensions
- 50 x 41 cm
- Description
- A well-made green canvas rucksack with leather straps and metal buckles. It has a drawstring closure with metal grommets through which a woven cord is passed through and tied. The flap is a separate piece of canvas sewn onto the sack which is darted and rounded to fit neatly over the top of the pack. A leather strap is attached to the flap by two rivets stamped with the words “WIDE STEEL SHANK” (Note: all rivets mentioned have this lettering). The main sack/bag has a white label sewn onto the top bearing the trademark “A & F” in red thread and “Abercrombie & Fitch Co.” in blue, underneath this “NEW YORK”. Underneath the label the word “MILLS” is hand printed in black indelible ink. There are two flapped pockets attached to the front of the bag; each flap has a leather strap attached to it by one rivet. The pocket has a metal buckle attached to the flap by piece of folded leather attached by two rivets. Between the pockets is another metal buckle attached by piece of folded leather and two rivets. On the back of the bag there is a piece of leather sewn onto the top and two straps for arms to go through; each strap is attached by two rivets; 5cm from the bottom and 3.5cm from each side there are two pieces of green corded material 6.5x2w cm folded over and sewn with green thread in an X-shaped pattern. On the bottom sides of the pack there are two folded pieces of leather, through which a metal ring is inserted, attached by two rivets. A metal push clip that hooks through the ring has a folded leather piece held together by one rivet. Through these two folds the buckle and the clip are attached.
- Subject
- sports
- climbing
- mountaineering
- Edwin W. Mills
- Credit
- Gift of Ted and Judy Mills, Mill Bay, 2004
- Catalogue Number
- 103.08.1135
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1973
- Material
- fabric; fleece;metal
- Catalogue Number
- 103.05.0415
- Description
- A brown, thick, sherpa-style vest with four gold buttons that fasten with brown elastic loops. Buttons depict a crest with lions.
1 image
- Title
- Fleece Vest
- Date
- 1973
- Material
- fabric; fleece;metal
- Dimensions
- 71.0 x 61.0 cm
- Description
- A brown, thick, sherpa-style vest with four gold buttons that fasten with brown elastic loops. Buttons depict a crest with lions.
- Subject
- mountaineering
- climbing
- outerwear
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 2023
- Catalogue Number
- 103.05.0415
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1979
- Material
- skin; fibre; metal; plastic
- Catalogue Number
- 103.03.1132 a,b
- Description
- A pair of brown leather, over the ankle, square-toed hiking boots with light brown cotton laces. Each boot has six lace hooks (lacing lugs) and one grommetted eyelet on each side. The sole is separate and stitiched to the boot.
1 image
- Title
- Hiking Boots
- Date
- 1979
- Material
- skin; fibre; metal; plastic
- Dimensions
- 15.5 x 9.5 x 27.5 cm
- Description
- A pair of brown leather, over the ankle, square-toed hiking boots with light brown cotton laces. Each boot has six lace hooks (lacing lugs) and one grommetted eyelet on each side. The sole is separate and stitiched to the boot.
- Subject
- sports
- hiking
- climbing
- Catharine Whyte
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 103.03.1132 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1973 – 1990
- Material
- metal; skin; fibre
- Catalogue Number
- 108.04.1080 a,b
- Description
- A metal ice axe and hammer, Terradactyl, with woven strap handles.(a) a metal ice climbing axe with pink and blue woven strap and another white flat woven strap, metal adze shovel shaped and the other side-serated edge, drooped pick (b) woven flat yellow strap, one end flat hammer, the other side s…
1 image
- Title
- Ice Ax
- Date
- 1973 – 1990
- Material
- metal; skin; fibre
- Description
- A metal ice axe and hammer, Terradactyl, with woven strap handles.(a) a metal ice climbing axe with pink and blue woven strap and another white flat woven strap, metal adze shovel shaped and the other side-serated edge, drooped pick (b) woven flat yellow strap, one end flat hammer, the other side serated edge.
- Subject
- Chic Scott
- sports
- climbing
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1991
- Catalogue Number
- 108.04.1080 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1990
- Material
- wood; metal
- Catalogue Number
- 108.04.1085
- Description
- Typical ice axe, extra long plain pick and dished spade. Engraved on side of pick "Cassin". Point is 10.0 long with 4.3 long solid point. Wooden handle is broken below head.
1 image
- Title
- Ice Ax
- Date
- prior to 1990
- Material
- wood; metal
- Dimensions
- 31.3 x 80.5 cm
- Description
- Typical ice axe, extra long plain pick and dished spade. Engraved on side of pick "Cassin". Point is 10.0 long with 4.3 long solid point. Wooden handle is broken below head.
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1989
- Catalogue Number
- 108.04.1085
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1973 – 1990
- Material
- metal; fibre
- Catalogue Number
- 108.04.1079
- Description
- One metal ice hammer with a fabric wrapped handle and a red woven strap attached near the spike at the base of the handle.
- Title
- Ice Hammer
- Date
- 1973 – 1990
- Material
- metal; fibre
- Description
- One metal ice hammer with a fabric wrapped handle and a red woven strap attached near the spike at the base of the handle.
- Subject
- Chic Scott
- sports
- climbing
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1991
- Catalogue Number
- 108.04.1079
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1970 – 1990
- Material
- metal
- Catalogue Number
- 108.04.1089 a-c
- Description
- A metal carabiner (a) with two metal ice climbing screws (b) and (c) hanging from it:(a) a metal carabiner with a spring lock mechanism but no safety lock, “HG” engraved into the metal.(b) a straight rod of metal (16.5cm long, handle 6.0cm wide) bent and then soldered to form a handle at one one e…
1 image
- Title
- Ice Screw
- Date
- 1970 – 1990
- Material
- metal
- Description
- A metal carabiner (a) with two metal ice climbing screws (b) and (c) hanging from it:(a) a metal carabiner with a spring lock mechanism but no safety lock, “HG” engraved into the metal.(b) a straight rod of metal (16.5cm long, handle 6.0cm wide) bent and then soldered to form a handle at one one end and a turned screw on the other. Engraved “CLAUDIUS SIMOND CHAMONIX”(c) a straight rod of metal ( 19.5cm long, handle 6.5cm wide ) bent to form an open handle at one one end and a turned screw on the other. Engraved on the handle “STUBAI MABWA AUSTRIA” . There is red paint where the metal end is wound around the rod and a piece of blue tape wound around the rod portion.
- Subject
- sports
- climbing
- mountaineering
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1089 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1971 – 1975
- Material
- metal; plastic; glass; fabric; leather;
- Catalogue Number
- 104.41.0211 a,b
- Description
- Black Chrome 2-Lug Leica M5 with a black fabric carry strap [unattached] in a black leather carry case with strap. The camera has a removable plate on the bottom so that the film can be loaded - while the plate is off, a panel on the back of the camera can be opened to check the position of the fil…
1 image
- Title
- Leica Camera
- Date
- 1971 – 1975
- Material
- metal; plastic; glass; fabric; leather;
- Dimensions
- 8.7 x 9.0 x 15.2 cm
- Description
- Black Chrome 2-Lug Leica M5 with a black fabric carry strap [unattached] in a black leather carry case with strap. The camera has a removable plate on the bottom so that the film can be loaded - while the plate is off, a panel on the back of the camera can be opened to check the position of the film inside. Also on the back is the combined view and range finder in the top left corner and two small outlets for attachments [such as flashes and external lights] with a small black rubber dual plug. The top of the camera features the standard Leica attachment slot and shutter dial, but the M5 has an improved rapid transport lever to wind the shutter and advance the film faster than the M4 did. The camera is fit with a f=5 cm 1:2 lens with a black plastic filter attachment that also holds the black plastic lens cap in place. On the left-hand side are two vertical strap lugs for the fabric carry strap, between which is the housing for the self timer/internal flash battery. The leather carry case consists of two pieces: the base, which attaches to the camera via a screw that fits into the bottom right corner, and the removable lid that snaps onto the back of the base piece - the carry strap is attached with metal brackets to the upper part of the base piece.
- Subject
- photography
- camera equipment
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.41.0211 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.