Narrow Results By
- 1920s 901
- 1950s 881
- 1900s 849
- 1930s 792
- 1940s 572
- 1910s 539
- 1870s 473
- 1960s 440
- 1890s 351
- 1970s 312
- 1880s 221
- 1980s 135
- 1850s 126
- 1800s
- 1990s
- 1860s 37
- 1820s 25
- 1830s 15
- 1840s 14
- 1750s
- 1780s 9
- 2000s 9
- 1810s 8
- 1790s 7
- 2010s 7
- 1700s 5
- 2020s 4
- 1600s 2
- 1080s 1
- 1300s 1
- 1500s 1
- 1530s 1
- 1550s 1
- 1620s 1
- 1690s 1
- 1720s 1
- 1760s 1
- 1770s 1
- Date
- 1800 – 1880
- Material
- fibre
- Catalogue Number
- 103.05.1101
- Description
- Embroidered black silk, gathered at the top onto band, folded under, made of three panels of silk, centre panel 42.0 wideand side panels 20.0 with 6.0 of that turned to back, embroidery done with single thread in shades of green, brown and pale yellow, blue and melon, flowers and leaves in two pan…
1 image
- Title
- Apron
- Date
- 1800 – 1880
- Material
- fibre
- Dimensions
- 65.0 x 74.0 cm
- Description
- Embroidered black silk, gathered at the top onto band, folded under, made of three panels of silk, centre panel 42.0 wideand side panels 20.0 with 6.0 of that turned to back, embroidery done with single thread in shades of green, brown and pale yellow, blue and melon, flowers and leaves in two panels downand wider panel across
- Credit
- Gift of Charles C. Reid, Banff, Alberta, 1986
- Catalogue Number
- 103.05.1101
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1999
- Material
- skin, deer; glass; fibre;
- Catalogue Number
- 103.05.1186
- Description
- An untanned, buckskin jacket with floral beadwork design on the back across the shoulders in flowers with colours red, blue, black, yellow and leaves of green. The area below the beadwork is pinked and fringed. There is mirror image, identical beadwork on each side of the front of the jacket. There…
1 image
- Title
- Beaded Jacket
- Date
- 1999
- Material
- skin, deer; glass; fibre;
- Dimensions
- 50.0; with arms 167.5 x 88.5 cm
- Description
- An untanned, buckskin jacket with floral beadwork design on the back across the shoulders in flowers with colours red, blue, black, yellow and leaves of green. The area below the beadwork is pinked and fringed. There is mirror image, identical beadwork on each side of the front of the jacket. There is a zippered front closure and a pinked and beaded portion on each side of the zipper. The beadwork is alternating blue, yellow and red flowers with blue and yellow leaves and stems and then below flowers with colours of red, blue, black, yellow and leaves in green. There are four flowers on each side. On the flat front pockets the borders are pinked and the beadwork is a flower with red petals rimmed with black and a yellow centre. The leaves and stem are green.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 103.05.1186
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Beaded Moccasins
https://archives.whyte.org/en/permalink/artifact103.03.1128%20a%2cb
- Date
- 1999
- Material
- skin, animal
- Catalogue Number
- 103.03.1128 a,b
- Description
- A pair of men’s cured hide, high-top moccasins, plain, no beadwork; they have pinked tongues and uppers, and long ties threaded through high-tops and tongue where it meets the vamps.
1 image
- Title
- Beaded Moccasins
- Date
- 1999
- Material
- skin, animal
- Dimensions
- 22.0 x 13.5 x 29.5 sole cm
- Description
- A pair of men’s cured hide, high-top moccasins, plain, no beadwork; they have pinked tongues and uppers, and long ties threaded through high-tops and tongue where it meets the vamps.
- Subject
- footwear
- Indigenous
- Andy Russell
- regalia
- Credit
- Gift of Andy Russell, Waterton Park, 1999
- Catalogue Number
- 103.03.1128 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1750 – 1800
- Material
- wood; metal
- Catalogue Number
- 102.03.0085
- Description
- A four legged, supported top-opening chest, panels on front are inset into vertical post by mortise and tenon technique; three front panels have diamond pattern with floral carved relief. Inside the chest is a lidded inset shelf.
1 image
- Title
- Blanket Chest
- Date
- 1750 – 1800
- Material
- wood; metal
- Dimensions
- 60.5 x 49.7 x 99.0 cm
- Description
- A four legged, supported top-opening chest, panels on front are inset into vertical post by mortise and tenon technique; three front panels have diamond pattern with floral carved relief. Inside the chest is a lidded inset shelf.
- Subject
- households, furniture
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.03.0085
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- ivory
- Catalogue Number
- 110.02.0016
- Description
- A small round ivory box constructed of three ivory rings so perfectly carved as to stack together easily to form a single unit; lid with large tear-shaped ivory knob sits inside top ring; two round-headed ivory pins pass through holes in the lip with the shanks protruding to the angles forming base…
1 image
- Title
- Box
- Date
- 1800 – 1900
- Material
- ivory
- Dimensions
- 7.0 x 6.2 cm
- Description
- A small round ivory box constructed of three ivory rings so perfectly carved as to stack together easily to form a single unit; lid with large tear-shaped ivory knob sits inside top ring; two round-headed ivory pins pass through holes in the lip with the shanks protruding to the angles forming base and lip.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 110.02.0016
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Bric-A-Brac Stand Collection
https://archives.whyte.org/en/permalink/artifact102.04.0319%20a-f
- Date
- 1800 – 1890
- Material
- wood
- Catalogue Number
- 102.04.0319 a-f
- Description
- A collection of six short dark brown wooden stands. (a) 2.3 x 9.8 - incised double circle in circular platform top and carved knob trim around its rim. Outward bowed base is elaborately carved through in interwoven knot design between three square spiral motifs, each of which terminates in a small …
1 image
- Title
- Bric-A-Brac Stand Collection
- Date
- 1800 – 1890
- Material
- wood
- Dimensions
- 2.3 cm
- Description
- A collection of six short dark brown wooden stands. (a) 2.3 x 9.8 - incised double circle in circular platform top and carved knob trim around its rim. Outward bowed base is elaborately carved through in interwoven knot design between three square spiral motifs, each of which terminates in a small foot. Underside has circle carved at centre. (b) 2.6 x 5.8 - small lip around top platform, outward bowed base carved through in scrolled vine pattern between solid spaces terminating in three small feet. Marks: on base, red Japeanese writing) (c) 2.6 x 6.7 - double circle inscribed on top platform which is ringed with small lip, smooth outward bowed base with three small feet curving outward, small circle cut in base. Marks: on base, paper label, “605/2” (d) 2.7 x 6.5 - lathe turned with small lip around top platform, smooth outward bowed base with small foot-ring, bottom hollowed inside foot-ring. (e) 1.6 x 5.7 - small raised ring carved around platform top, base flares out slightly and is scroll-shaped along bottom defining three very small feet. (f) 1.6 x 4.5 - small lip around platform top, sharp shoulder of outward bowed based incised with small lines around; scroll carving at bottom defines small feet.
- Subject
- households
- decorative
- Japanese
- E. S. Morse;
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.04.0319 a-f
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Bronze Sculpture
https://archives.whyte.org/en/permalink/artifact107.02.1037
- Date
- 1998 – 2001
- Material
- metal, bronze; wood
- Catalogue Number
- 107.02.1037
- Description
- Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
1 image
- Title
- Bronze Sculpture
- Date
- 1998 – 2001
- Material
- metal, bronze; wood
- Dimensions
- 24.5 x 9.0 x 17.5 cm
- Description
- Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
- Credit
- Gift of Trail Riders of the Canadian Rockies, Calgary, 2002
- Catalogue Number
- 107.02.1037
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- metal
- Catalogue Number
- 104.20.0661
- Description
- Small, plain, circular plate with wide rim and fairly deep dish area. Stamps on rim include Heraldic rampant lion and "H" "X" "B" separately stamped. Plate base stamped with crest including crown and laurels.
1 image
- Title
- Butter Plate
- Date
- 1800 – 1900
- Material
- metal
- Dimensions
- 1.8 x 18.7 cm
- Description
- Small, plain, circular plate with wide rim and fairly deep dish area. Stamps on rim include Heraldic rampant lion and "H" "X" "B" separately stamped. Plate base stamped with crest including crown and laurels.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.20.0661
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- wood, mahogany; glass; fibre
- Catalogue Number
- 102.03.0029
- Description
- A cabinet with two parts; an upper cabinet that is attached to a lower bureau. The upper cabinet has two glass-front doors and three shelves. The lower bureau has three drawers and a fold-out leaf that can serve as a desk.
1 image
- Title
- Cabinet
- Date
- 1800 – 1900
- Material
- wood, mahogany; glass; fibre
- Dimensions
- 174.0 x 47.5 x 101.5 cm
- Description
- A cabinet with two parts; an upper cabinet that is attached to a lower bureau. The upper cabinet has two glass-front doors and three shelves. The lower bureau has three drawers and a fold-out leaf that can serve as a desk.
- Subject
- households
- furniture
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 102.03.0029
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Catalogue Number
- 104.41.0081 a-d
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
1 image
- Title
- Camera Tripod
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Dimensions
- 28.3 x 28.6 x 138.5 cm
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0081 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1991
- Material
- metal
- Catalogue Number
- 104.19.0176
- Description
- A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
1 image
- Title
- Can Opener
- Date
- 1991
- Material
- metal
- Dimensions
- 2.0 x 2.0 x 6.5 cm
- Description
- A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
- Subject
- Whyte home
- drinking
- tools
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0176
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1875
- Material
- metal
- Catalogue Number
- 102.05.0076
- Description
- Scissor-like snuffer on three ball supports. Scissor motion opens door on snuffing chamber. In its 19th century usage on longer wicks the opened door would catch the wick, shear it and extinguish it and the burnt portion of the wick would be left in the chamber. Scissor and handle tops have relief …
1 image
- Title
- Candlesnuffer
- Date
- 1800 – 1875
- Material
- metal
- Dimensions
- 4.7 x 6.7 x 18.3 cm
- Description
- Scissor-like snuffer on three ball supports. Scissor motion opens door on snuffing chamber. In its 19th century usage on longer wicks the opened door would catch the wick, shear it and extinguish it and the burnt portion of the wick would be left in the chamber. Scissor and handle tops have relief floral decoration. Chamber top has relief rampant lion. Hallmarks on chamber door include "X", a crown and a cross (?) within crest.
- Subject
- households
- decorative
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0076
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1759 – 1759
- Material
- wood; ivory; metal, brass; metal, silver
- Catalogue Number
- 103.08.0110
- Description
- A straight walking stick with an ivory knob handle joined to the wooden stick with a silver ring. The bottom tip of the cane is covered with brass. There are holes at either side of the top of the cane for a hand strap. The silver ring is inscribed with “Fort Dummer 1759 James W. Brown”.
1 image
- Title
- Cane
- Date
- 1759 – 1759
- Material
- wood; ivory; metal, brass; metal, silver
- Dimensions
- 81.0 cm
- Description
- A straight walking stick with an ivory knob handle joined to the wooden stick with a silver ring. The bottom tip of the cane is covered with brass. There are holes at either side of the top of the cane for a hand strap. The silver ring is inscribed with “Fort Dummer 1759 James W. Brown”.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 103.08.0110
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1750 – 1800
- Material
- metal
- Catalogue Number
- 104.08.0005
- Description
- Small, heavily rusted iron ball.
1 image
- Title
- Cannonball
- Date
- 1750 – 1800
- Material
- metal
- Dimensions
- 3.7 x 3.7 cm
- Description
- Small, heavily rusted iron ball.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.08.0005
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- fruit, gourd; wood; fibre
- Catalogue Number
- 103.08.0157
- Description
- A canteen made from a circular dried gourd that has a wooden neck screwed in to one side. There are also two twisted basket loops attached to opposide sides of the canteen used to hold a long green carrying strap. The gourd has lettering printed on one side that reads “Souvr...de Chamounix...Mon…
1 image
- Title
- Canteen
- Date
- 1800 – 1900
- Material
- fruit, gourd; wood; fibre
- Description
- A canteen made from a circular dried gourd that has a wooden neck screwed in to one side. There are also two twisted basket loops attached to opposide sides of the canteen used to hold a long green carrying strap. The gourd has lettering printed on one side that reads “Souvr...de Chamounix...Mont Blanc..Hote H.P. de Savoie”. The lettering is around a French horn with a yellow lyre at its centre.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 103.08.0157
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Carpentry Plane Set
https://archives.whyte.org/en/permalink/artifact104.49.0006%20a-q
- Date
- 1800 – 1825
- Material
- wood; metal
- Catalogue Number
- 104.49.0006 a-q
- Description
- Set of 17 wooden carpenter's planes, includes bench planes, block planes and moulding planes. 7 bench planes, heavy bodies made of blocks of wood, some with simple totes (handles) curved to fit the shape of the hand, some with double totes shaped like a saw handle. (a) trying plane , double tote…
1 image
- Title
- Carpentry Plane Set
- Date
- 1800 – 1825
- Material
- wood; metal
- Description
- Set of 17 wooden carpenter's planes, includes bench planes, block planes and moulding planes. 7 bench planes, heavy bodies made of blocks of wood, some with simple totes (handles) curved to fit the shape of the hand, some with double totes shaped like a saw handle. (a) trying plane , double tote (b) trying plane (c) jack ? plane (d) jack ? plane (e) jack ? plane (f) smoothing plane (g) compass plane, 4 rabbet type planes (h) crosscut, banding dado (i) rabbet (j) plow plane (k) tongue and groove. 6 moulding planes (l) double dado (m) hollow (n) quarter round (o) bead moulding (p) sash (?) moulding (q) side (?) moulding See extra pages re: tools in the catalogue book pk
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.49.0006 a-q
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Ceremonial Pen
https://archives.whyte.org/en/permalink/artifact105.06.1029
- Date
- 1990
- Material
- metal ; fibre
- Catalogue Number
- 105.06.1029
- Description
- Official Cross pen used at incorporation ceremonies, Town of Banff, Town Office, January 1, 1990 and Whyte Museum of the Canadian Rockies January 27, 1990. Engraved on the side"Town of Banff Jan 1, 1990". Clam shell case. Underneath velvety presentation piece is a small set of instructions tucked…
1 image
- Title
- Ceremonial Pen
- Date
- 1990
- Material
- metal ; fibre
- Dimensions
- 13.4 cm
- Description
- Official Cross pen used at incorporation ceremonies, Town of Banff, Town Office, January 1, 1990 and Whyte Museum of the Canadian Rockies January 27, 1990. Engraved on the side"Town of Banff Jan 1, 1990". Clam shell case. Underneath velvety presentation piece is a small set of instructions tucked into a layer of beige paper.
- Subject
- incorporation
- town
- Town of Banff
- Credit
- Gift of Town of Banff, Banff, 1990
- Catalogue Number
- 105.06.1029
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Collection Scroll End
https://archives.whyte.org/en/permalink/artifact105.02.0092%20a-q
- Date
- 1750 – 1850
- Material
- wood; ivory
- Catalogue Number
- 105.02.0092 a-q
- Description
- A collection of 17 various caps used to conceal the rough ends of dowels on which scrolls are rolled. 10 smooth, polished, cylindrical pieces of ivory, roughly hollowed with small inset lip at one end to accommodate dowel, some with hairline cracks. 7 smoothly finished wooden caps, one black pai…
1 image
- Title
- Collection Scroll End
- Date
- 1750 – 1850
- Material
- wood; ivory
- Description
- A collection of 17 various caps used to conceal the rough ends of dowels on which scrolls are rolled. 10 smooth, polished, cylindrical pieces of ivory, roughly hollowed with small inset lip at one end to accommodate dowel, some with hairline cracks. 7 smoothly finished wooden caps, one black painted wooden peg.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 105.02.0092 a-q
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Commemorative Package
https://archives.whyte.org/en/permalink/artifact105.02.1044%20a-g
- Date
- 1992
- Material
- fibre; metal; paper; plastic
- Catalogue Number
- 105.02.1044 a-g
- Description
- Seven items from Brewster’s 100 years reunion all bearing the same special logo: (a) one white t-shirt, (b) one empty beer can, (c) (d) two name tags, (e) (f) two pins, (g) and one pen.(a) t-shirt has black and white logo on front left chest. colour logo on back.(b) logo on two sides of can(c) nam…
1 image
- Title
- Commemorative Package
- Date
- 1992
- Material
- fibre; metal; paper; plastic
- Description
- Seven items from Brewster’s 100 years reunion all bearing the same special logo: (a) one white t-shirt, (b) one empty beer can, (c) (d) two name tags, (e) (f) two pins, (g) and one pen.(a) t-shirt has black and white logo on front left chest. colour logo on back.(b) logo on two sides of can(c) name tag of TED HART, AUTHOR-BREWSTER STORY(d) name tag of PAT HART, GUEST(e) soft enamel pin of 100 years logo(f) soft enamel pin of 100 years logo(g) burgundy pen with logo and contact info written on side.
- Credit
- Gift of Ted J. Hart, Banff, 1992
- Catalogue Number
- 105.02.1044 a-g
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Commemorative Pin
https://archives.whyte.org/en/permalink/artifact105.02.1110%20a%2cb
- Date
- 1990
- Material
- metal
- Catalogue Number
- 105.02.1110 a,b
- Description
- Two metal pins with sun rising over Mount Rundle. (a) "Town of Banff Citizen Jan 1 1990" (b) "Town of Banff commemorative Jan 1 1990"
1 image
- Title
- Commemorative Pin
- Date
- 1990
- Material
- metal
- Dimensions
- 2.8 cm
- Description
- Two metal pins with sun rising over Mount Rundle. (a) "Town of Banff Citizen Jan 1 1990" (b) "Town of Banff commemorative Jan 1 1990"
- Subject
- Town of Banff
- souvenir
- Credit
- Gift of Dave Irwin, Canmore, 1990
- Catalogue Number
- 105.02.1110 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.