Skip header and navigation

Narrow Results By

5 records – page 1 of 1.

Date
1900 – 1930
Material
metal; glass; wood
Catalogue Number
104.30.0006
Description
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails…
  1 image  
Title
Air Meter
Date
1900 – 1930
Material
metal; glass; wood
Dimensions
7.1 x 7.8 x 8.5 cm
Description
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails attached to centre by small metal arms. Face dial measured around perimeter with numbers from 0-90 has small circular dial at top with numbers from 0-9 and the letters "HDS" just above central pivot of small thin needle. Dial reads "Air meter to 1000 feet/No 508". Bottom of solid brass base has screw hole at centre to hold screw mount which is brass finger screw with black painted brass tube attached to top. Lever on side of meter halts needle. Box, plain square wooden box with brass hinges for lid is fitted with small blocks of wood to hold air meter securely in place. Mounting screw slips over arm of piece of wood fastened to lid. Paper label inside lid reads, "Correction for Air Meter No. 508/. Add 30 per minute to the observed reading of the Air Meter. Note. Each instrument is now regulated so as to reduce the correction to a constant quantity per minute, which must be added as in the example given.". Small brass latch hook closes lid.
Subject
households
industry
surveying
Russell Robb
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.30.0006
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
n.d.
Material
metal;
Catalogue Number
104.03.0010
Description
Classic metal cowbell with hanging metal clapper. Separate metal strap keeper soldered on
  1 image  
Title
Cowbell
Date
n.d.
Material
metal;
Dimensions
10.8 x 7.3 x 10.0 cm
Description
Classic metal cowbell with hanging metal clapper. Separate metal strap keeper soldered on
Subject
industry
dairy
Credit
Gift of Harold McBride Mortimer, Banff, 1995
Catalogue Number
104.03.0010
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1910 – 1920
Material
metal
Catalogue Number
104.03.1013
Description
Typical metal cowbell with hanging metal clapper. Separate metal strap keeper soldered on top.
  1 image  
Title
Cowbell
Date
1910 – 1920
Material
metal
Dimensions
9.0 x 7.5 cm
Description
Typical metal cowbell with hanging metal clapper. Separate metal strap keeper soldered on top.
Subject
industry
dairy
Credit
Gift of Unknown, 1968
Catalogue Number
104.03.1013
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1900 – 1920
Material
metal; fibre; skin
Catalogue Number
104.03.1014
Description
Home made metal cowbell. Cylinder flattened at open end, bolt hanging on string serves as clapper. Broken skin strap has metal buckle one end, attached to bell with metal wire.
  1 image  
Title
Cowbell
Date
1900 – 1920
Material
metal; fibre; skin
Dimensions
6.0 cm
Description
Home made metal cowbell. Cylinder flattened at open end, bolt hanging on string serves as clapper. Broken skin strap has metal buckle one end, attached to bell with metal wire.
Subject
industry
dairy
Credit
Gift of Unknown, 1968
Catalogue Number
104.03.1014
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1970
Material
metal
Catalogue Number
104.03.3001
Description
Brass chamber and strap keeper with steel clapper.
  1 image  
Title
Cowbell
Date
prior to 1970
Material
metal
Dimensions
16.0 x 7.0 x 12.2 cm
Description
Brass chamber and strap keeper with steel clapper.
Subject
industry, farming
animals
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.03.3001
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Back to Top