Narrow Results By
Accessories Guitar Accessories
https://archives.whyte.org/en/permalink/artifact104.34.0008%20a-m
- Date
- 1930 – 1950
- Material
- metal; wood; ivory; plastic
- Catalogue Number
- 104.34.0008 a-m
- Description
- A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to t…
1 image
- Title
- Accessories Guitar Accessories
- Date
- 1930 – 1950
- Material
- metal; wood; ivory; plastic
- Dimensions
- 3.4 cm
- Description
- A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to the band, tip is crimped in stiff fold, 3 have solder at the tip to form a longer point. (MFG: Fitrite).(b) finger pick set (2.5 x 1.8 x 2.0) six metal rings that fit over the finger tips, adjustable band has circles cut out along it, flame shaped fingernail rises from band, curling inward slightly, and with cut out circle at middle. (mfg: National) (c) finger pick (2.5 x 1.9 x 2.0) as (b) but without cut out circles (mfg: Artisto) (d) finger picks (3.0 x 1.7 x 1.9) two metal bands that wrap around finger tip, widening near the end, then narrowing to a point that extends off to one side of the finger. (e) finger picks (3.5 x 1.5 x 1.9) two flat ivory bands which curl once around finger tip and extend out to one side in a point. (f) pick (3.2 x 2.3 x .1) small, flat, egg shaped, marbleized, grey plastic, stiff. (mfg: Durro). (g) pick (3.0 x 2.2 x .1) as (f) but brown tortoise shell coloured plastic (mfg: Eureka). (h) pick (2.7 x 1.9 x .1) as (f) but transparent yellowed plastic ?, slightly curled. (i) capo (5.3 x 1.9 x .9) flat metal bar with small hooks at either end to hold tightly coiled spring across the under side, lined underneath bar with cork. (mfg: Elton). j) bridge ? (4.7 x .8 x 1.1) a long, half round, hollow metal bar with six incised rings spaced evenly along the length. (mfg: Kamiki). (k) slides (7.2 x 1.7 diam) two heavy, solid, brass rods (used to slide over strings when playing the guitar Hawaiian style) (1) peg (5.0 x .9 x 2.3) white, cast plastic peg with long shaft and flattened key with finger depression each side, ferrules around top of shaft. (m) bridge (4.7 x 1.4 x 1.9) low, unfinished wood bridge with small dark support perpendicularly across under middle, short legs thicken slightly at base, series of small notches across top, some deliberately cut into wood, some worn in odd places from strings (mfg: Grover).
- Subject
- Whyte home
- households
- entertainment
- pastime
- Annie White
- music
- accessories
- equipment
- sound
- song
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.34.0008 a-m
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Chin Rest Violin Accessories
https://archives.whyte.org/en/permalink/artifact104.34.0006
- Date
- 1950 – 1960
- Material
- wood; metal; wood; fibre
- Catalogue Number
- 104.34.0006
- Description
- A black, spoon shaped chin rest with metal brackets. Carved wood with very gentle depression to cup chin, and short, curved arm to one side. Small, flat pieces of cork glued underneath at points that will rest on violin. U-shaped bracket of steel which adjusts by turnbuckles, hanging down from sid…
1 image
- Title
- Chin Rest Violin Accessories
- Date
- 1950 – 1960
- Material
- wood; metal; wood; fibre
- Dimensions
- 5.5 x 4.4 x 10.7 cm
- Description
- A black, spoon shaped chin rest with metal brackets. Carved wood with very gentle depression to cup chin, and short, curved arm to one side. Small, flat pieces of cork glued underneath at points that will rest on violin. U-shaped bracket of steel which adjusts by turnbuckles, hanging down from side of chin rest, clamps to edge of violin. Bottom bar lined fastened to bracket by twisted multi strand wire. Marks: stamped into metal under bar of bracket, "made in Germany" Note: felt loose.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.34.0006
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1900 – 1930
- Material
- metal
- Catalogue Number
- 104.36.0003
- Description
- Lyre shaped cast iron frame with a third cast iron leg from the top of the harp down the middle between the outer legs. A double, flat, flexible, thin, vibrating tongue passes down on either side of the central leg to the end of the harp where the ends turn up at sharp right angles, ending in wire …
1 image
- Title
- Jew's Harp
- Date
- 1900 – 1930
- Material
- metal
- Dimensions
- 2.2 x 5.6 x 6.9 cm
- Description
- Lyre shaped cast iron frame with a third cast iron leg from the top of the harp down the middle between the outer legs. A double, flat, flexible, thin, vibrating tongue passes down on either side of the central leg to the end of the harp where the ends turn up at sharp right angles, ending in wire like hooks. The flexible tongue tapers from .3 cm wide to less than .1 cm at the hooked end. A series of three small, shallow, notches in the middle of each outer leg on the under side.
- Subject
- Whyte home
- households
- entertainment
- pastime
- Annie White
- music
- sound
- song
- accessories
- equipment
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.36.0003
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Musical Bones Sets
https://archives.whyte.org/en/permalink/artifact104.33.0027%20a-h
- Date
- 1920 – 1945
- Material
- bone; wood
- Catalogue Number
- 104.33.0027 a-h
- Description
- Two sets of minstrel's bones, each set consisting of two pairs. (a-d) are actual segments of rib bones which have been rounded at the ends and polished smooth. (e-h) are hard pieces of black wood ebony? , lenticular in cross section, curved to mimic the rib bones, but cut off square at the ends.…
1 image
- Title
- Musical Bones Sets
- Date
- 1920 – 1945
- Material
- bone; wood
- Description
- Two sets of minstrel's bones, each set consisting of two pairs. (a-d) are actual segments of rib bones which have been rounded at the ends and polished smooth. (e-h) are hard pieces of black wood ebony? , lenticular in cross section, curved to mimic the rib bones, but cut off square at the ends. (a) 14.3 x .9 x 3.9 - bone, slightly spatulate shape with rounded ends. (b) 17.2 x 1.0 x 3.0 - bone, long, and thick at one end, rounded ends. (c) 18.3 x 1.0 x 3.0 - bone, long, rounded at ends, with slight twist in bone. (d) 17.0 x .8 x 3.2 - bone, long, squared at ends.( e-h) 17.9 x .8 x 2.6 - black wood, straight sided, cut off square at ends, and curving upward. Note: (h) 6.5 cm long piece broken off one end, .2 cm deep saw cut on side opposite, and uneven, close grooves on concave surface, a saw again?
- Subject
- Whyte home
- households
- entertainment
- minstrel show
- Annie White
- music
- musical equipment
- sound
- song
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.33.0027 a-h
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.