Skip header and navigation

Narrow Results By

14 records – page 1 of 2.

Date
1920 – 1960
Material
glass;
Catalogue Number
104.20.1301
Description
Two-part glass butter dish with a shallow base and deeper lid, both pieces have decorative beveling throughout the sides and on the top. Engraved into the base is “BOTTOM,” legible when the lid is removed - the base also has small handles that stick out from the short sides.
  1 image  
Title
Butter Dish
Date
1920 – 1960
Material
glass;
Dimensions
8.5 x 16.7 x 9.0 cm
Description
Two-part glass butter dish with a shallow base and deeper lid, both pieces have decorative beveling throughout the sides and on the top. Engraved into the base is “BOTTOM,” legible when the lid is removed - the base also has small handles that stick out from the short sides.
Subject
kitchen utensils
kitchen tools
food preparation;
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.20.1301
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1940 – 1950
Material
metal;
Catalogue Number
104.19.0274
Description
Metal hand-held cherry pitter that consists of a flat metal frame with two finger holes and a small round base with a hole in the middle, as well as a metal wire plunger with a finger hold at the top and a small square flared pusher at the bottom. The wire plunger sits in the middle of the frame an…
  1 image  
Title
Cherry Pitter
Date
1940 – 1950
Material
metal;
Dimensions
2.1 x 5.9 x 8.5 cm
Description
Metal hand-held cherry pitter that consists of a flat metal frame with two finger holes and a small round base with a hole in the middle, as well as a metal wire plunger with a finger hold at the top and a small square flared pusher at the bottom. The wire plunger sits in the middle of the frame and moves up and down. A cherry would be placed in the round base, the plunger would be pushed down, and the pit would be pushed out through the hole at the bottom.
Subject
food preparation
kitchen utensils;
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.19.0274
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1913 – 1950
Material
metal; aluminum;
Catalogue Number
104.19.0270 a,b
Description
Two round, fluted, aluminum cooking molds that fit together - one inside the other. The smaller mold’s fluted section is solid, with the manufacturer details engraved on it, and the piece is completely smooth - the larger piece has decorative rims. Could possibly be a bundt pan or jello mold.
  1 image  
Title
Cooking Mold
Date
1913 – 1950
Material
metal; aluminum;
Dimensions
6.0 cm
Description
Two round, fluted, aluminum cooking molds that fit together - one inside the other. The smaller mold’s fluted section is solid, with the manufacturer details engraved on it, and the piece is completely smooth - the larger piece has decorative rims. Could possibly be a bundt pan or jello mold.
Subject
cooking
kitchen utensils
cookware
baking
food preparation;
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.19.0270 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1910 – 1950
Material
metal; aluminum;
Catalogue Number
104.19.0282 a,b
Description
Two cylindrical aluminum filters, most likely used inside coffee makers - both have very small holes throughout the entirety of the cylinder. The larger filter has a solid base, a support ridge with holes throughout sticking out about 2/3rds up, and a thin wire handle. The smaller filter is hollow,…
  1 image  
Title
Filter
Date
1910 – 1950
Material
metal; aluminum;
Dimensions
6.8 cm
Description
Two cylindrical aluminum filters, most likely used inside coffee makers - both have very small holes throughout the entirety of the cylinder. The larger filter has a solid base, a support ridge with holes throughout sticking out about 2/3rds up, and a thin wire handle. The smaller filter is hollow, with no base, and a single flat ridge at the top. No makers marks.
Subject
coffee making
food preparation
camping equipment
kitchen utensils.
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.19.0282 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1910 – 1950
Material
metal;
Catalogue Number
104.19.0280
Description
Cylindrical metal grater with a handle on top. The cylinder is divided into three surfaces: large holes, small holes, and standard cheese grater.
  1 image  
Title
Grater
Date
1910 – 1950
Material
metal;
Dimensions
21.8 cm
Description
Cylindrical metal grater with a handle on top. The cylinder is divided into three surfaces: large holes, small holes, and standard cheese grater.
Subject
kitchen utensils
food preparation;
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.19.0280
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1950
Material
metal; steel; wood;
Catalogue Number
104.20.1298 a,b
Description
Two kitchen knives with steel blades and wooden handles - the handles have three brass studs each. One knife has a thicker blade that curves slightly and has a small raised reinforcement before the handle - stamped on one side near the handle is a head wearing a hat and scarf that has “LA DUROLLIEN…
  1 image  
Title
Kitchen Knife
Date
1920 – 1950
Material
metal; steel; wood;
Dimensions
1.7 x 2.3 x 32.5 cm
Description
Two kitchen knives with steel blades and wooden handles - the handles have three brass studs each. One knife has a thicker blade that curves slightly and has a small raised reinforcement before the handle - stamped on one side near the handle is a head wearing a hat and scarf that has “LA DUROLLIENNE” written on it. The other knife’s blade has been sharpened so much it appears to be less than half of its original width - faded remnants of something stamped on the blade is visible, but illegible.
Subject
kitchen utensils
cooking
food preparation;
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.20.1298 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1885 – 1920
Material
skin; glass
Catalogue Number
104.10.0003
Description
A very simply shaped sheath made to hold a knife. The back of the sheath is plain moosehide with a large belt loop at the centre made from a 3 cm wide strip of hide. Part of the top of the case that extends to one side. The front of the sheath is completely beaded with a light blue background and…
  1 image  
Title
Knife Sheath
Date
1885 – 1920
Material
skin; glass
Dimensions
7.5 x 31.0 cm
Description
A very simply shaped sheath made to hold a knife. The back of the sheath is plain moosehide with a large belt loop at the centre made from a 3 cm wide strip of hide. Part of the top of the case that extends to one side. The front of the sheath is completely beaded with a light blue background and four chevron shaped lines made up of small squares of red and dark blue beads. A rolled beaded edging of red and dark blue beads runs along the curved side and across the top of the sheath.
Subject
Indigenous, Stoney
households
hunting
food preparation
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
104.10.0003
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1900 – 1940
Material
metal; wood;
Catalogue Number
104.19.0273 a,b
Description
Two clamp-mounted hand-cranked metal meat grinders with metal handles. Both grinders have an open spout at the top that exposes an internal spiral grinder connected to the handle - at the opposite end from the handle is an export spout that can house different-shaped plates which can be removed via…
  1 image  
Title
Meat Grinder
Date
1900 – 1940
Material
metal; wood;
Dimensions
26.5 x 15.5 x 10.2 cm
Description
Two clamp-mounted hand-cranked metal meat grinders with metal handles. Both grinders have an open spout at the top that exposes an internal spiral grinder connected to the handle - at the opposite end from the handle is an export spout that can house different-shaped plates which can be removed via a screw. Below this mechanism is the clamp, separated by a short support. The larger grinder has two separate feet that sit on top of the table or counter with the clap at the bottom, raised or lowered with a key screw. The smaller grinder has a single plate with thin raised ridges on the bottom for extra grip and the same kind of key screw clamp coming up from the bottom. Also included are two plates, one for each grinder.
Subject
food preparation
kitchen utensils
cooking;
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.19.0273 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
n.d.
Material
glass; metal
Catalogue Number
104.20.0921
Description
Rectangular pepper shaker made of opaque white glass with a metal lid that has been painted red. On the front of the shaker is a red painting of sailboats and the word “PEPPER” in blue type. “MADE IN U.S.A.” is stamped on the base.
  1 image  
Title
Pepper Shaker
Date
n.d.
Material
glass; metal
Dimensions
8.5 x 4.5 x 4.5 cm
Description
Rectangular pepper shaker made of opaque white glass with a metal lid that has been painted red. On the front of the shaker is a red painting of sailboats and the word “PEPPER” in blue type. “MADE IN U.S.A.” is stamped on the base.
Subject
Whyte home
eating
food preparation
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.20.0921
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1960
Material
porcelain;
Catalogue Number
104.20.1300
Description
Plain white oval serving plate with a raised rim. No maker’s mark.
  1 image  
Title
Plate
Date
1920 – 1960
Material
porcelain;
Dimensions
2.7 x 30.4 x 24.0 cm
Description
Plain white oval serving plate with a raised rim. No maker’s mark.
Subject
kitchen utensils
food preparation
household wares;
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.20.1300
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

14 records – page 1 of 2.

Back to Top