Skip header and navigation

Narrow Results By

14 records – page 1 of 2.

Date
1925 – 1950
Material
metal; aluminum; wood;
Catalogue Number
104.19.0272
Description
Tall cylindrical aluminum coffee maker/pot with an ventilation cap that fits on top and an internal filter. The main body has a wooden handle screwed into one side, with a short spout opposite it - throughout the portion of the coffee maker that is covered by the spout are small holes. The cap has …
  1 image  
Title
Coffee Maker
Date
1925 – 1950
Material
metal; aluminum; wood;
Dimensions
27.5 x 11.2 x 19.1 cm
Description
Tall cylindrical aluminum coffee maker/pot with an ventilation cap that fits on top and an internal filter. The main body has a wooden handle screwed into one side, with a short spout opposite it - throughout the portion of the coffee maker that is covered by the spout are small holes. The cap has two roughly-triangular groupings of ventilation holes opposite from each other and the domed top is capped with a small wooden handle. Inside the coffee maker is a metal filter that consists of a thin pole supported by a slightly domed base with a lip just above the middle on which sits the removable filter. No manufacturer details could be found.
Subject
coffee maker
drinks
kitchen utensil
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.19.0272
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
n.d.
Material
glass; metal
Catalogue Number
104.20.0971
Description
A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with a flat piece of metal with small holes that acts as the filter. The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in p…
  1 image  
Title
Coffee Maker
Date
n.d.
Material
glass; metal
Dimensions
20.5 x 16.0 x 25.0 cm
Description
A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with a flat piece of metal with small holes that acts as the filter. The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in place with two protrusions along the edge. There is a metal band around the centre of the coffee maker. Stamped on the bottom is “7759-B 9 CUP PYREX MADE IN U.S.A.”
Subject
Whyte home
drinking
coffee
kitchen tools
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.20.0971
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
n.d.
Material
glass; metal
Catalogue Number
104.20.0972
Description
A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with two flat pieces of metal with small holes that acts as the filter. The filter is stamped with “MADE IN CANADA” The basket and filter are removable. The coffee maker has a glass handle and …
  1 image  
Title
Coffee Maker
Date
n.d.
Material
glass; metal
Dimensions
29.0 x 14.0 x 24.0 cm
Description
A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with two flat pieces of metal with small holes that acts as the filter. The filter is stamped with “MADE IN CANADA” The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in place with two protrusions along the edge. There is a metal band around the centre of the coffee maker. Stamped on the bottom is “7756-B 6 CUP PYREX MADE IN U.S.A.” “PYREX” is also embossed on the handle and engraved on the metal band below an image of flames. “PYREX MADE IN USA” is also on the lid.
Subject
Whyte home
kitchen tools
coffee
drinking
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.20.0972
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1935 – 1960
Material
metal
Catalogue Number
104.19.0075 a,b
Description
Both are light blue enamel coffeepots with flat bases, ridging on pot near base, hinged domed lids, white enamel interiors.
  1 image  
Title
Coffee Maker
Date
1935 – 1960
Material
metal
Dimensions
22.0 x 12.5 x 19.0 cm
Description
Both are light blue enamel coffeepots with flat bases, ridging on pot near base, hinged domed lids, white enamel interiors.
Subject
households
kitchen
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.19.0075 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1935 – 1950
Material
metal
Catalogue Number
104.19.0076
Description
Cylindrical, tall aluminum coffee pot with strainer spout, flat lid which is hinged. Two swivel bracketed handles for pouring and one loop handle for suspension, lifting.
  1 image  
Title
Coffee Maker
Date
1935 – 1950
Material
metal
Dimensions
18.0 x 15.0 x 16.5 cm
Description
Cylindrical, tall aluminum coffee pot with strainer spout, flat lid which is hinged. Two swivel bracketed handles for pouring and one loop handle for suspension, lifting.
Subject
households
kitchen
camping
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.19.0076
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1940 – 1960
Material
glass; rubber; metal; plastic
Catalogue Number
104.19.0090
Description
Double globed coffee percolator consisting of lower portion, glass pot with black handle, inside of which fits upper portion, invert, lidded glass pot with funnel and rubber neck for fitting. "GE" (General Electric) stamp and "T.M. Reg. U.S. Pat. Off. PYREX" stamp on both glass bulb portions, metal…
  1 image  
Title
Coffee Maker
Date
1940 – 1960
Material
glass; rubber; metal; plastic
Dimensions
26.7 x 16.0 cm
Description
Double globed coffee percolator consisting of lower portion, glass pot with black handle, inside of which fits upper portion, invert, lidded glass pot with funnel and rubber neck for fitting. "GE" (General Electric) stamp and "T.M. Reg. U.S. Pat. Off. PYREX" stamp on both glass bulb portions, metal , stainless, lid on upper glass pot section.
Subject
households
kitchen
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.19.0090
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1940 – 1960
Material
metal;
Catalogue Number
104.20.1291
Description
Long metal spoon with a rounded can opener at one end with “DUNHAM & TODD LTD. CALGARY, ALTA” etched on it.
  1 image  
Title
Spoon
Date
1940 – 1960
Material
metal;
Dimensions
2.3 x 3.5 x 19.2 cm
Description
Long metal spoon with a rounded can opener at one end with “DUNHAM & TODD LTD. CALGARY, ALTA” etched on it.
Subject
Crosby family
Abegweit
utensils
kitchen accessories;
Credit
Gift of Robert Crosby Family, Banff, 1998
Catalogue Number
104.20.1291
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1965
Material
horn
Catalogue Number
104.20.0671
Description
Tablespoon sized spoon with thistle like design at handle tip, overall beige green colour.
  1 image  
Title
Spoon
Date
1950 – 1965
Material
horn
Dimensions
2.0 x 4.1 x 19.7 cm
Description
Tablespoon sized spoon with thistle like design at handle tip, overall beige green colour.
Subject
households
kitchen
Greta Luader
Harry Lauder
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.20.0671
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960 – 1970
Material
wood
Catalogue Number
104.20.0673 a,b
Description
Both are smoothly, curved shaped spoons carved from one piece of wood. Yellow brown varnished wood colour. (a) resembles small ladle, (b) could be a sauce spoon for small amounts.
  1 image  
Title
Spoon
Date
1960 – 1970
Material
wood
Dimensions
3.0 x 3.9 x 15.8 cm
Description
Both are smoothly, curved shaped spoons carved from one piece of wood. Yellow brown varnished wood colour. (a) resembles small ladle, (b) could be a sauce spoon for small amounts.
Subject
households
craft
kitchen
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.20.0673 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1960
Material
horn
Catalogue Number
104.20.0674
Description
Hand carved scoop or spoon from natural Bighorn sheep horn. Shows natural ridges and colouration. Has been hand carved in places.
  1 image  
Title
Spoon
Date
1930 – 1960
Material
horn
Dimensions
2.9 x 4.2 x 17.0 cm
Description
Hand carved scoop or spoon from natural Bighorn sheep horn. Shows natural ridges and colouration. Has been hand carved in places.
Subject
Indigenous
households
craft
kitchen
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.20.0674
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

14 records – page 1 of 2.

Back to Top