Narrow Results By
- Date
- 1937 – 1950
- Material
- metal;
- Catalogue Number
- 104.19.0278 a,b
- Description
- Two metal baking pans, one a low-rimmed tray and the other a deeper square pan, with a dappled bottom plate - the tray has “OVENEX THE NEW BAKING METAL” and the patent number stamped in the top left corner. Platers and Stampers, Ltd. was a subsidiary business of EKCO, an American company that wante…
1 image
- Title
- Baking Pan
- Date
- 1937 – 1950
- Material
- metal;
- Dimensions
- 2.0 x 35.0 x 25.0 cm
- Description
- Two metal baking pans, one a low-rimmed tray and the other a deeper square pan, with a dappled bottom plate - the tray has “OVENEX THE NEW BAKING METAL” and the patent number stamped in the top left corner. Platers and Stampers, Ltd. was a subsidiary business of EKCO, an American company that wanted to cash in on the British market - Platers and Stampers was the name given this off-shoot in order to make it sound more domestic and less “American.”
- Subject
- kitchen utensils
- baking
- cooking equipment;
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0278 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1960
- Material
- glass;
- Catalogue Number
- 104.20.1301
- Description
- Two-part glass butter dish with a shallow base and deeper lid, both pieces have decorative beveling throughout the sides and on the top. Engraved into the base is “BOTTOM,” legible when the lid is removed - the base also has small handles that stick out from the short sides.
1 image
- Title
- Butter Dish
- Date
- 1920 – 1960
- Material
- glass;
- Dimensions
- 8.5 x 16.7 x 9.0 cm
- Description
- Two-part glass butter dish with a shallow base and deeper lid, both pieces have decorative beveling throughout the sides and on the top. Engraved into the base is “BOTTOM,” legible when the lid is removed - the base also has small handles that stick out from the short sides.
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.20.1301
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1940 – 1950
- Material
- metal;
- Catalogue Number
- 104.19.0274
- Description
- Metal hand-held cherry pitter that consists of a flat metal frame with two finger holes and a small round base with a hole in the middle, as well as a metal wire plunger with a finger hold at the top and a small square flared pusher at the bottom. The wire plunger sits in the middle of the frame an…
1 image
- Title
- Cherry Pitter
- Date
- 1940 – 1950
- Material
- metal;
- Dimensions
- 2.1 x 5.9 x 8.5 cm
- Description
- Metal hand-held cherry pitter that consists of a flat metal frame with two finger holes and a small round base with a hole in the middle, as well as a metal wire plunger with a finger hold at the top and a small square flared pusher at the bottom. The wire plunger sits in the middle of the frame and moves up and down. A cherry would be placed in the round base, the plunger would be pushed down, and the pit would be pushed out through the hole at the bottom.
- Subject
- food preparation
- kitchen utensils;
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0274
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1913 – 1950
- Material
- metal; aluminum;
- Catalogue Number
- 104.19.0270 a,b
- Description
- Two round, fluted, aluminum cooking molds that fit together - one inside the other. The smaller mold’s fluted section is solid, with the manufacturer details engraved on it, and the piece is completely smooth - the larger piece has decorative rims. Could possibly be a bundt pan or jello mold.
1 image
- Title
- Cooking Mold
- Date
- 1913 – 1950
- Material
- metal; aluminum;
- Dimensions
- 6.0 cm
- Description
- Two round, fluted, aluminum cooking molds that fit together - one inside the other. The smaller mold’s fluted section is solid, with the manufacturer details engraved on it, and the piece is completely smooth - the larger piece has decorative rims. Could possibly be a bundt pan or jello mold.
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0270 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1950
- Material
- metal;
- Catalogue Number
- 104.19.0277 a,b
- Description
- Two rectangular metal wire cooling racks with an X-shaped support frame, built into which are 5 supports to keep it off the counter, and thin wire woven throughout in a grid.
1 image
- Title
- Cooling Rack
- Date
- 1920 – 1950
- Material
- metal;
- Dimensions
- 1.6 x 23.1 x 33.0 cm
- Description
- Two rectangular metal wire cooling racks with an X-shaped support frame, built into which are 5 supports to keep it off the counter, and thin wire woven throughout in a grid.
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0277 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1960
- Material
- metal; nickel silver;
- Catalogue Number
- 104.20.1299 a-i
- Description
- Mostly matching set of nickel silver dining flatware consisting of four forks, two knives [one of which does not match the rest], and three spoons - one is smaller than the other two. The set features decorations of flowers throughout the handles; two bunched together at the end, one in the middle,…
1 image
- Title
- Dining Flatware
- Date
- 1930 – 1960
- Material
- metal; nickel silver;
- Dimensions
- 2.1 x 3.6 x 17.6 cm
- Description
- Mostly matching set of nickel silver dining flatware consisting of four forks, two knives [one of which does not match the rest], and three spoons - one is smaller than the other two. The set features decorations of flowers throughout the handles; two bunched together at the end, one in the middle, and one just below the head with thin decorative lines between them. The one knife that doesn’t match the others has a decorative border around the mostly square handle with scrolls and flowers in the middle - it has a maker’s mark stamped on the blade that looks like “CVO STAINLESS.” Every piece of the set has “ROGERS NICKEL SILVER” stamped on the backs - no information found online.
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.20.1299 a-i
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- metal
- Catalogue Number
- 104.20.0946 a-d
- Description
- A set of 4 ornate metal picks for eating. All have a round ball at the end, a swirled design engraved along the shaft, and end in a slight spoon shaped point.
1 image
- Title
- Eating Pick
- Date
- n.d.
- Material
- metal
- Dimensions
- 0.5 x 12.5 cm
- Description
- A set of 4 ornate metal picks for eating. All have a round ball at the end, a swirled design engraved along the shaft, and end in a slight spoon shaped point.
- Subject
- Whyte home
- eating
- dining
- utensils
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.20.0946 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1923 – 1928
- Material
- metal;
- Catalogue Number
- 104.19.0276
- Description
- Rotary style eggbeater comprised of two bulb-shaped flat blades that spin around a metal wire bulb-shaped base, a flat plate with serrated edge that fits into a corresponding cog at the top of one of the beaters operated by a short spring-wrapped handle, and a narrow handle at the top. Engraved on …
1 image
- Title
- Eggbeater
- Date
- 1923 – 1928
- Material
- metal;
- Dimensions
- 6.5 x 7.2 x 22.8 cm
- Description
- Rotary style eggbeater comprised of two bulb-shaped flat blades that spin around a metal wire bulb-shaped base, a flat plate with serrated edge that fits into a corresponding cog at the top of one of the beaters operated by a short spring-wrapped handle, and a narrow handle at the top. Engraved on the plate is the manufacturer logo, patent information, and “MADE IN U.S.A.”
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0276
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1930
- Material
- metal;
- Catalogue Number
- 104.20.1295
- Description
- Metal eggcup with a hollow base and fluted stand below the cup, which has a slightly curved-out lip.
1 image
- Title
- Eggcup
- Date
- 1920 – 1930
- Material
- metal;
- Dimensions
- 5.9 cm
- Description
- Metal eggcup with a hollow base and fluted stand below the cup, which has a slightly curved-out lip.
- Subject
- kitchen utensils
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.20.1295
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1910 – 1950
- Material
- metal; aluminum;
- Catalogue Number
- 104.19.0282 a,b
- Description
- Two cylindrical aluminum filters, most likely used inside coffee makers - both have very small holes throughout the entirety of the cylinder. The larger filter has a solid base, a support ridge with holes throughout sticking out about 2/3rds up, and a thin wire handle. The smaller filter is hollow,…
1 image
- Title
- Filter
- Date
- 1910 – 1950
- Material
- metal; aluminum;
- Dimensions
- 6.8 cm
- Description
- Two cylindrical aluminum filters, most likely used inside coffee makers - both have very small holes throughout the entirety of the cylinder. The larger filter has a solid base, a support ridge with holes throughout sticking out about 2/3rds up, and a thin wire handle. The smaller filter is hollow, with no base, and a single flat ridge at the top. No makers marks.
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0282 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.