A necklace made by alternating sets of two dentalium shells with various coloured beads. A triangular shaped abalone shell hanging from centre as a pendant.
A necklace made by alternating sets of two dentalium shells with various coloured beads. A triangular shaped abalone shell hanging from centre as a pendant.
A strong, single edged hunting knife with a cross piece. The hilt of the knife is made of brass, and covered with leather. The blade is marked “Collins and Co. Hartford Serofino #17 (Galidad)”. (b) Sheath made of leather with steel tip and steel detailing. Leather is embossed with crown and leav…
A strong, single edged hunting knife with a cross piece. The hilt of the knife is made of brass, and covered with leather. The blade is marked “Collins and Co. Hartford Serofino #17 (Galidad)”. (b) Sheath made of leather with steel tip and steel detailing. Leather is embossed with crown and leaves. “LEGITIMUS” is stamped under the crown and the number ”10” is stamped on a cross piece above.
A round wooden butter mold that is a circular press carved with a handle which passes through a hole in the top of the mold. The press has a thistle and leaf design carved into it.
A round wooden butter mold that is a circular press carved with a handle which passes through a hole in the top of the mold. The press has a thistle and leaf design carved into it.
A rustic-manufacture pierced tin lantern, flat base, cylindrical body, conical top which terminates in a metal hanging flat loop. Cylinder has door which by a simple slot clasp fits over a flange for opening and closing. Pattern on door is made of slits punched out from behind into a star and borde…
A rustic-manufacture pierced tin lantern, flat base, cylindrical body, conical top which terminates in a metal hanging flat loop. Cylinder has door which by a simple slot clasp fits over a flange for opening and closing. Pattern on door is made of slits punched out from behind into a star and border pattern in lines and dots, and a similar pattern is punched out on the rest of the cylinder,the conic top is punched in radial slit lines. Lantern is open at top of cone (about 3 cm.)
A pair of candlesticks each with a square pyramidal shaped base of copper with an overlaid silver design. Each candlestick has a square stem and a square top with a round candleholder.
A pair of candlesticks each with a square pyramidal shaped base of copper with an overlaid silver design. Each candlestick has a square stem and a square top with a round candleholder.
A short candlestick (a) with saucer base and a handle. The saucer has an inscribed design, and the candleholder is fluted with a flaring lip. The candlesnuffer ( b) is a blossom shape and attaches to the candlestick’s handle.
A short candlestick (a) with saucer base and a handle. The saucer has an inscribed design, and the candleholder is fluted with a flaring lip. The candlesnuffer ( b) is a blossom shape and attaches to the candlestick’s handle.
Japanese blue and white porcelain plate shaped like a shallow bowl, stands on .5 cm. high rim, decoration on topside includes ten 4 cm. circles which contain five birds alternating with a fish scale like design. The five birds are all the same and stylized, head has a distinct comb and is in profil…
Japanese blue and white porcelain plate shaped like a shallow bowl, stands on .5 cm. high rim, decoration on topside includes ten 4 cm. circles which contain five birds alternating with a fish scale like design. The five birds are all the same and stylized, head has a distinct comb and is in profile while body is in front view with wings spread open, between the circles are blue and white cloud like scrolls. 10 cm. circle in center is undecorated white. Rim has border of blue cross hatched triangles. At least twenty holes in glaze are evident on topside. Underside is decorated with a delicate curvy blue line, mark on bottom resemble a monogram, framed in a double blue line.
Persian style carpet, geometric pattern of red, beige and black squares on a red background. A cleaning label on one corner indicates that the carpet was cleaned once in Boston, Massachusetts.
Persian style carpet, geometric pattern of red, beige and black squares on a red background. A cleaning label on one corner indicates that the carpet was cleaned once in Boston, Massachusetts.
Very old dried and cracked bison? horn with tip broken off to leave small hole. Strap of buckskin thong tied around at tip and attached to another thong tied around at open broad end of horn.
Very old dried and cracked bison? horn with tip broken off to leave small hole. Strap of buckskin thong tied around at tip and attached to another thong tied around at open broad end of horn.
A silver plated round plate with heavy trim along the edge. The rim is monogrammed with “JMR” in intertwined script. The bottom of the plate is marked with “G M Co” and “EP 0610 141n”.
A silver plated round plate with heavy trim along the edge. The rim is monogrammed with “JMR” in intertwined script. The bottom of the plate is marked with “G M Co” and “EP 0610 141n”.
Flat based, cylindrical pot with ridge on exterior near top lip, over which a flat lid sits. Two steel brackets below ridge which hold swivel, arched, wire handle. Lid has double riveted loop which holds ring. Ring functions as handle. Stamped on lid top "1 QT", bottom dented.
Flat based, cylindrical pot with ridge on exterior near top lip, over which a flat lid sits. Two steel brackets below ridge which hold swivel, arched, wire handle. Lid has double riveted loop which holds ring. Ring functions as handle. Stamped on lid top "1 QT", bottom dented.
A flattened sack shaped metal flask with round bottom and long neck and seam along sides. Round brass collar at top of neck where flat round cap screws on. Cap has finger trigger at side which operates a shutter mechanism across a hole in the cap's centre surrounded by a threaded lip in order to em…
A flattened sack shaped metal flask with round bottom and long neck and seam along sides. Round brass collar at top of neck where flat round cap screws on. Cap has finger trigger at side which operates a shutter mechanism across a hole in the cap's centre surrounded by a threaded lip in order to empty a measure of shot. Contains very small 1 mm round lead shot pellets. Stamped on brass cap "Improved best quality Sykes patent"
A tall, tower shaped, silver plated sugar shaker resting on an octagonal base. The shaker has a tall domed lid that is pierced with a pattern of comma-shaped holes and round holes. The lid is surmounted by a spire of four stacked balls.
A tall, tower shaped, silver plated sugar shaker resting on an octagonal base. The shaker has a tall domed lid that is pierced with a pattern of comma-shaped holes and round holes. The lid is surmounted by a spire of four stacked balls.
A tableware set consisting of a gravy boat and saucer (a,b), a platter (c), a butter dish with cover (d), and six dessert plates (e-j). Each piece has a white background with gold checked border at the rim with a gold filigree decoration around the border. Each piece, except the butter dish, conta…
11.0 (a); 16.0 (d) x 26.0 (a); 25.0 (b); 50.0 (c); cm
Description
A tableware set consisting of a gravy boat and saucer (a,b), a platter (c), a butter dish with cover (d), and six dessert plates (e-j). Each piece has a white background with gold checked border at the rim with a gold filigree decoration around the border. Each piece, except the butter dish, contains a red crown symbol at the border with a gold filigree design hanging beneath it. The butter dish is round, with the base forming a pedestal, and has a high domed lid. Each of the dessert plates have a picture of two cherubs at the centre.
A set of twenty-four dinner plates. Each plate is white with a gold checked border around a slightly shaped edge with a red crown at the top. There is a gold medallion in centre of each plate with a thin gold line around the bottom of the lip of the plate. Each plate is marked on the bottom with…
A set of twenty-four dinner plates. Each plate is white with a gold checked border around a slightly shaped edge with a red crown at the top. There is a gold medallion in centre of each plate with a thin gold line around the bottom of the lip of the plate. Each plate is marked on the bottom with a crown and “A II”.
A tall oak grandfather's clock resting on four clawed feet. The bottom is a panelled hollow box. The middle section of the clock has a hinged bevelled glass door that is rounded at the top with carved leaf decoration and carved leaves at each side near the top. The middle door exposes three hea…
A tall oak grandfather's clock resting on four clawed feet. The bottom is a panelled hollow box. The middle section of the clock has a hinged bevelled glass door that is rounded at the top with carved leaf decoration and carved leaves at each side near the top. The middle door exposes three heavy brass cylindrical balance weights and a large pendulum. There is a glass door at top that reveals the face in a heavy case with a pointed wooden roof and carved twisted columns at the corners and supporting a railing around the very top. Both doors have locks and keys. The clock has a round etched metal face with brass numerals and a brass plate in the middle with finely wrought black iron hands. There are dials to measure seconds and regulate the chime, and an arch over the face contains two hemispheres, and a painted ship and moon on a moving wheel beneath.