A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to t…
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to the band, tip is crimped in stiff fold, 3 have solder at the tip to form a longer point. (MFG: Fitrite).(b) finger pick set (2.5 x 1.8 x 2.0) six metal rings that fit over the finger tips, adjustable band has circles cut out along it, flame shaped fingernail rises from band, curling inward slightly, and with cut out circle at middle. (mfg: National) (c) finger pick (2.5 x 1.9 x 2.0) as (b) but without cut out circles (mfg: Artisto) (d) finger picks (3.0 x 1.7 x 1.9) two metal bands that wrap around finger tip, widening near the end, then narrowing to a point that extends off to one side of the finger. (e) finger picks (3.5 x 1.5 x 1.9) two flat ivory bands which curl once around finger tip and extend out to one side in a point. (f) pick (3.2 x 2.3 x .1) small, flat, egg shaped, marbleized, grey plastic, stiff. (mfg: Durro). (g) pick (3.0 x 2.2 x .1) as (f) but brown tortoise shell coloured plastic (mfg: Eureka). (h) pick (2.7 x 1.9 x .1) as (f) but transparent yellowed plastic ?, slightly curled. (i) capo (5.3 x 1.9 x .9) flat metal bar with small hooks at either end to hold tightly coiled spring across the under side, lined underneath bar with cork. (mfg: Elton). j) bridge ? (4.7 x .8 x 1.1) a long, half round, hollow metal bar with six incised rings spaced evenly along the length. (mfg: Kamiki). (k) slides (7.2 x 1.7 diam) two heavy, solid, brass rods (used to slide over strings when playing the guitar Hawaiian style) (1) peg (5.0 x .9 x 2.3) white, cast plastic peg with long shaft and flattened key with finger depression each side, ferrules around top of shaft. (m) bridge (4.7 x 1.4 x 1.9) low, unfinished wood bridge with small dark support perpendicularly across under middle, short legs thicken slightly at base, series of small notches across top, some deliberately cut into wood, some worn in odd places from strings (mfg: Grover).
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, …
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, high, yellowed, glass like bridge with arced top, and arch under between legs, curved in at sides, and four shallow notches across top. (d) pegs (15.9 x .9 x 1.9) three plain, wooden tuning pegs with straight, tapering shafts, and simple round flat keys at top with depressions for fingers to grasp, small slit cut across bottom, impressed marks from strings around bottom. (e)pick guard (7.8 x 5.2) small, lyre shaped form cut from a thin sheet of tortoiseshell patterned plastic, two pinholes at stem where broken off from something else (a bracket?).
A circular pin in the shape of a spoked ship's wheel with an enamelled map of the world at the centre. There is a red band around the map with the words “Everett Travel Service” spaced evenly around the circle. The pin has a large stud clasp back.
A circular pin in the shape of a spoked ship's wheel with an enamelled map of the world at the centre. There is a red band around the map with the words “Everett Travel Service” spaced evenly around the circle. The pin has a large stud clasp back.
Alarm clock with metal case and rounded wooden frame that sits on halved, flattened dowels. The face of the clock is covered with convex glass. The face of the clock has a small dial used to set the alarm time underneath the “12”. The center of the clock has metal hands and “Mayfair.” The back …
Alarm clock with metal case and rounded wooden frame that sits on halved, flattened dowels. The face of the clock is covered with convex glass. The face of the clock has a small dial used to set the alarm time underneath the “12”. The center of the clock has metal hands and “Mayfair.” The back of the clock has keys to wind the clock, set the time and a knob to turn on and off the alarm.
Two long wooden staffs with cast metal crooks painted black at the top, and metal collars, 9.0 cm, with long spikes of metal, 4.0 cm, at the tip. Metal crooks are cast to represent chamois horn, the staffs are of hickory.
Two long wooden staffs with cast metal crooks painted black at the top, and metal collars, 9.0 cm, with long spikes of metal, 4.0 cm, at the tip. Metal crooks are cast to represent chamois horn, the staffs are of hickory.
Long varnished hickory staff with cast iron crook. Crook is painted black and designed to resemble tip of ibex horn. 8.5 cm metal collar around bottom with 4.0 sturdy spike at end. Stamped into bottom of collar "Geze Hulsenfitze L.P.F."
Long varnished hickory staff with cast iron crook. Crook is painted black and designed to resemble tip of ibex horn. 8.5 cm metal collar around bottom with 4.0 sturdy spike at end. Stamped into bottom of collar "Geze Hulsenfitze L.P.F."
Long wooden shafts with metal crooks and spikes. (a) Painted black crook, some paint worn off. 2.7 cm wide silver band with emblem of boot and alpenstock and SLTH CR, screwed on to shaft. "Birks Sterling" stamped on bottom edge, round spike. 8.6 wide metal collar, 2 copper nails at top edge. (b…
Long wooden shafts with metal crooks and spikes. (a) Painted black crook, some paint worn off. 2.7 cm wide silver band with emblem of boot and alpenstock and SLTH CR, screwed on to shaft. "Birks Sterling" stamped on bottom edge, round spike. 8.6 wide metal collar, 2 copper nails at top edge. (b) same as (a) but without silver band. "Geze Hulsenfitze C.P.F." stamped on metal spike end.
Heavy, short skis, with metal toe plate and bindings. They become thicker at the beautifully curved tip. Metal edging is screwed on, holes going in through the skis below the bindings. The binding is "ATTENHOFFER'S ALPINA".
Heavy, short skis, with metal toe plate and bindings. They become thicker at the beautifully curved tip. Metal edging is screwed on, holes going in through the skis below the bindings. The binding is "ATTENHOFFER'S ALPINA".
Pair of home made unpainted skis. Very little camber, in fact practically flat. Rounded point. Metal screwed on edges, metal bindings "Ramy-Wike made in France".
Pair of home made unpainted skis. Very little camber, in fact practically flat. Rounded point. Metal screwed on edges, metal bindings "Ramy-Wike made in France".