Embroidered black silk, gathered at the top onto band, folded under, made of three panels of silk, centre panel 42.0 wideand side panels 20.0 with 6.0 of that turned to back, embroidery done with single thread in shades of green, brown and pale yellow, blue and melon, flowers and leaves in two pan…
Embroidered black silk, gathered at the top onto band, folded under, made of three panels of silk, centre panel 42.0 wideand side panels 20.0 with 6.0 of that turned to back, embroidery done with single thread in shades of green, brown and pale yellow, blue and melon, flowers and leaves in two panels downand wider panel across
An untanned, buckskin jacket with floral beadwork design on the back across the shoulders in flowers with colours red, blue, black, yellow and leaves of green. The area below the beadwork is pinked and fringed. There is mirror image, identical beadwork on each side of the front of the jacket. There…
An untanned, buckskin jacket with floral beadwork design on the back across the shoulders in flowers with colours red, blue, black, yellow and leaves of green. The area below the beadwork is pinked and fringed. There is mirror image, identical beadwork on each side of the front of the jacket. There is a zippered front closure and a pinked and beaded portion on each side of the zipper. The beadwork is alternating blue, yellow and red flowers with blue and yellow leaves and stems and then below flowers with colours of red, blue, black, yellow and leaves in green. There are four flowers on each side. On the flat front pockets the borders are pinked and the beadwork is a flower with red petals rimmed with black and a yellow centre. The leaves and stem are green.
A pair of men’s cured hide, high-top moccasins, plain, no beadwork; they have pinked tongues and uppers, and long ties threaded through high-tops and tongue where it meets the vamps.
A pair of men’s cured hide, high-top moccasins, plain, no beadwork; they have pinked tongues and uppers, and long ties threaded through high-tops and tongue where it meets the vamps.
An eight strand coil beaded loop necklace, white beads wound around leather strands, with brass and wooden beads at the nadir of each strand. Two pieces of harness leather at each end with the strand leathers brought through them to form fringe, and hanging ties at the top of each piece of harness …
An eight strand coil beaded loop necklace, white beads wound around leather strands, with brass and wooden beads at the nadir of each strand. Two pieces of harness leather at each end with the strand leathers brought through them to form fringe, and hanging ties at the top of each piece of harness leather. Ties would tie immediately behind neck. A brass necklace with pony beads in a traditional men’s design. During Treaty times the Stoney were enamoured with brass and would barter for it for decorative purposes.*custom made plexi glass display in bottom of box
Six bottles of beer (empty) with case, signed poster and card. Typical beer bottle with screw off cap. Label affixed to one side has a red border with "Brewed Naturally in the Canadian Rockies" on top and "6% alc./vol. 341 mL" on bottom edge. The scene has mountains in the background with a clim…
Six bottles of beer (empty) with case, signed poster and card. Typical beer bottle with screw off cap. Label affixed to one side has a red border with "Brewed Naturally in the Canadian Rockies" on top and "6% alc./vol. 341 mL" on bottom edge. The scene has mountains in the background with a climber, Bruno Engler, highlighted in the centre, with "Bruno's Mountain Bock " in red. Also on the label is "The Bow Valley Brewing Company Canmore Alberta Strong Beer Biere Forte". The paper case is light brown in colour with the same picture as the label on four sides with stories about Bruno and the beer on the top, other promotion on sides. Poster 91.5x56.0 has a black border with white lettering. "Canmore's Legendary Brew" is in large black letters at top of poster, yellowish background is a mountain scene with a black and white image of the beer bottle centered. Signed "Bruno Engler" on left edge. Small card promoting the book "A Mountain Life Stories and photographs of Bruno Engler edited by R. W. Sandford".
A small round ivory box constructed of three ivory rings so perfectly carved as to stack together easily to form a single unit; lid with large tear-shaped ivory knob sits inside top ring; two round-headed ivory pins pass through holes in the lip with the shanks protruding to the angles forming base…
A small round ivory box constructed of three ivory rings so perfectly carved as to stack together easily to form a single unit; lid with large tear-shaped ivory knob sits inside top ring; two round-headed ivory pins pass through holes in the lip with the shanks protruding to the angles forming base and lip.
A box grand piano with ornately carved spiral legs. A hinged lid covers the keyboard and the upright box holds the hammers and wires. “Henry F. Miller Boston” is written in gold lettering on the folding lid. There is carved lattice piece that screws on to hold sheet music. The serial number “13270”…
A box grand piano with ornately carved spiral legs. A hinged lid covers the keyboard and the upright box holds the hammers and wires. “Henry F. Miller Boston” is written in gold lettering on the folding lid. There is carved lattice piece that screws on to hold sheet music. The serial number “13270” is printed in black on the inside. The pedals fold for storage underneath the piano body.
Small square wooden box with inlaid top. Box contains another box within concealed by separate removable side panels on all four sides. Inlay pattern is a series of horizontal strips of dark, light and black woods. The horizontals are interrupted by two rectangles. Upper triangle, 6.4 x 2.5 cm.…
Small square wooden box with inlaid top. Box contains another box within concealed by separate removable side panels on all four sides. Inlay pattern is a series of horizontal strips of dark, light and black woods. The horizontals are interrupted by two rectangles. Upper triangle, 6.4 x 2.5 cm. is inlaid with thin strips of black set diagonally in both directions. The lower triangle, 3.5 x 3.0 cm, is inlaid with twelve light and black wood triangles. A narrow vertical rectangle, 3.2 x .9 cm. of light wood interrupted by thin horizontal strips of black is set to the left of the lower triangle. The four corner support posts are attached to base by small wooden pegs which are visible on bottom.
A collection of six short dark brown wooden stands. (a) 2.3 x 9.8 - incised double circle in circular platform top and carved knob trim around its rim. Outward bowed base is elaborately carved through in interwoven knot design between three square spiral motifs, each of which terminates in a small …
A collection of six short dark brown wooden stands. (a) 2.3 x 9.8 - incised double circle in circular platform top and carved knob trim around its rim. Outward bowed base is elaborately carved through in interwoven knot design between three square spiral motifs, each of which terminates in a small foot. Underside has circle carved at centre. (b) 2.6 x 5.8 - small lip around top platform, outward bowed base carved through in scrolled vine pattern between solid spaces terminating in three small feet. Marks: on base, red Japeanese writing) (c) 2.6 x 6.7 - double circle inscribed on top platform which is ringed with small lip, smooth outward bowed base with three small feet curving outward, small circle cut in base. Marks: on base, paper label, “605/2” (d) 2.7 x 6.5 - lathe turned with small lip around top platform, smooth outward bowed base with small foot-ring, bottom hollowed inside foot-ring. (e) 1.6 x 5.7 - small raised ring carved around platform top, base flares out slightly and is scroll-shaped along bottom defining three very small feet. (f) 1.6 x 4.5 - small lip around platform top, sharp shoulder of outward bowed based incised with small lines around; scroll carving at bottom defines small feet.
Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
A metal butter dish with a high domed lid that has a large flower engraved boldly on one side. The rim of the dish is flattened and has an ornate triangular shaped handle at one side and two metal slots sticking out from the other (probably to hold knife). The dish has four triangular legs, in th…
A metal butter dish with a high domed lid that has a large flower engraved boldly on one side. The rim of the dish is flattened and has an ornate triangular shaped handle at one side and two metal slots sticking out from the other (probably to hold knife). The dish has four triangular legs, in the same design as the handle, that support the dish. The base is decorated with a drawing of a tepee and has the initials “I.B.”. The dish is also marked with “Standard Silver Co. Ltd. Toronto Quadruple Plate 257 Hard White Metal”.
Small, plain, circular plate with wide rim and fairly deep dish area. Stamps on rim include Heraldic rampant lion and "H" "X" "B" separately stamped. Plate base stamped with crest including crown and laurels.
Small, plain, circular plate with wide rim and fairly deep dish area. Stamps on rim include Heraldic rampant lion and "H" "X" "B" separately stamped. Plate base stamped with crest including crown and laurels.
A cabinet with two parts; an upper cabinet that is attached to a lower bureau. The upper cabinet has two glass-front doors and three shelves. The lower bureau has three drawers and a fold-out leaf that can serve as a desk.
A cabinet with two parts; an upper cabinet that is attached to a lower bureau. The upper cabinet has two glass-front doors and three shelves. The lower bureau has three drawers and a fold-out leaf that can serve as a desk.
Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
Two identical metal tripods with burgundy legs attached with white string. Three adjustable knobs are located at the top of the tripod allowing the metal bar inside to be adjusted maximizing the height. The folding and collapsible legs extend away from the vertical center in three sections to a len…
Two identical metal tripods with burgundy legs attached with white string. Three adjustable knobs are located at the top of the tripod allowing the metal bar inside to be adjusted maximizing the height. The folding and collapsible legs extend away from the vertical center in three sections to a length of 54.0 cm. A fourth adjustable knob, located at the bottom of the metal bar and meeting the top of the legs, allows the user to extend the legs of the tripod to the desired height. Each of the four knobs has the maker’s mark inscribed and reads: “ACME- LITE-CHICAGO- ” around the circumference. The feet are at a 45 degree angle and have a rubber stopper on the bottom giving the portable three-legged frame greater stability to resist lateral forces. A tripod may have been used for motion and still photography to prevent movement or to help achieve precise framing of an image.
A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
Scissor-like snuffer on three ball supports. Scissor motion opens door on snuffing chamber. In its 19th century usage on longer wicks the opened door would catch the wick, shear it and extinguish it and the burnt portion of the wick would be left in the chamber. Scissor and handle tops have relief …
Scissor-like snuffer on three ball supports. Scissor motion opens door on snuffing chamber. In its 19th century usage on longer wicks the opened door would catch the wick, shear it and extinguish it and the burnt portion of the wick would be left in the chamber. Scissor and handle tops have relief floral decoration. Chamber top has relief rampant lion. Hallmarks on chamber door include "X", a crown and a cross (?) within crest.
Copper candlestick is erected in centre of oval dish. Candlestick has curved handle at top rim and is unique because of notched slot which runs height of candlestick, in which candleholder proper can be raised to one of four positions as wax melts and candle is shortened. Candleholder proper attach…
Copper candlestick is erected in centre of oval dish. Candlestick has curved handle at top rim and is unique because of notched slot which runs height of candlestick, in which candleholder proper can be raised to one of four positions as wax melts and candle is shortened. Candleholder proper attached with small, flat handle which serves as hook for fitting into notches. Stick soldered to dish with brass.
A straight wooden walking stick with gold over lead at the handle. The gold handle is inscribed: “To Henry Moore, token of respect by his employees, Cleveland, May 23, 1861”.
A straight wooden walking stick with gold over lead at the handle. The gold handle is inscribed: “To Henry Moore, token of respect by his employees, Cleveland, May 23, 1861”.