Front: the entrance to a railway tunnel is on the left, and muontain and trees surround it. Above the entrance is written “1908” and then his writing for a colour scheme in the brc.Back: mountains and trees surround a valley running through the picture. Writing in the brc: “VICTORIA RIDGE OVER 10…
Front: the entrance to a railway tunnel is on the left, and muontain and trees surround it. Above the entrance is written “1908” and then his writing for a colour scheme in the brc.Back: mountains and trees surround a valley running through the picture. Writing in the brc: “VICTORIA RIDGE OVER 10,000feet, 33 BELOW zero, CONTINENTAL DIVIDE FEB 23”
An irregularly shaped vessel with various coloured clays juxtaposed to resemble land formations, sweeping upwards to approximately mid way. Lip is cut away to alter round shape. Also bottom edge is cut away in two places. Composed of 3 stoneware clays and porcelain - laminated, thrown and altere…
An irregularly shaped vessel with various coloured clays juxtaposed to resemble land formations, sweeping upwards to approximately mid way. Lip is cut away to alter round shape. Also bottom edge is cut away in two places. Composed of 3 stoneware clays and porcelain - laminated, thrown and altered, glazed with a traditional Celedone glaze, fired in reduction cone 9. Post firing sand blasting with silver amalgam added in lamination separations to conclude the work in keeping with historical ceramic traditions.
A long black academic gown with long wide pointed sleeves gathered at the shoulders. The gown opens down the length of the gown front, with a wide panel on either side, and snaps to fasten at the top creating a V-neck. The back of the gown is gathered between the shoulders with a square 'collar' …
A long black academic gown with long wide pointed sleeves gathered at the shoulders. The gown opens down the length of the gown front, with a wide panel on either side, and snaps to fasten at the top creating a V-neck. The back of the gown is gathered between the shoulders with a square 'collar' at the yoke and a line of twisted cording down centre that buttons at the bottom of the yoke. The monogram “P.A.M.” is sewn on a label at the neck. There is also a manufacturer’s label at the neck.
A gold-coloured academic gown gathered at the yoke and sleeves. The gown has a wide curving neck and front opening that are banded with black satin. There are three black satin bands along edges of the wide, long, pointed sleeves. The gown fastens at the front of the neck with hooks and a narro…
A gold-coloured academic gown gathered at the yoke and sleeves. The gown has a wide curving neck and front opening that are banded with black satin. There are three black satin bands along edges of the wide, long, pointed sleeves. The gown fastens at the front of the neck with hooks and a narrow ribbon tie.
A black academic hood that has a sleeve shape at the end. The deep hood is lined with orange silk and black silk in wide bands. The hood is edged in light grey velvet which forms a strap to pass over the shoulders and rest on the chest.
A black academic hood that has a sleeve shape at the end. The deep hood is lined with orange silk and black silk in wide bands. The hood is edged in light grey velvet which forms a strap to pass over the shoulders and rest on the chest.
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails…
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails attached to centre by small metal arms. Face dial measured around perimeter with numbers from 0-90 has small circular dial at top with numbers from 0-9 and the letters "HDS" just above central pivot of small thin needle. Dial reads "Air meter to 1000 feet/No 508". Bottom of solid brass base has screw hole at centre to hold screw mount which is brass finger screw with black painted brass tube attached to top. Lever on side of meter halts needle. Box, plain square wooden box with brass hinges for lid is fitted with small blocks of wood to hold air meter securely in place. Mounting screw slips over arm of piece of wood fastened to lid. Paper label inside lid reads, "Correction for Air Meter No. 508/. Add 30 per minute to the observed reading of the Air Meter. Note. Each instrument is now regulated so as to reduce the correction to a constant quantity per minute, which must be added as in the example given.". Small brass latch hook closes lid.
Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
A thin green stem extends upwards from the bottom centre. Three red sketchy blooms extend from the bloom at the top. At the bottom there are three red stamps.
A thin green stem extends upwards from the bottom centre. Three red sketchy blooms extend from the bloom at the top. At the bottom there are three red stamps.
A thin green stem extends upwards from the bottom centre. Three red sketchy blooms extend from the bloom at the top. At the bottom there are three red stamps.
A thin green stem extends upwards from the bottom centre. Three red sketchy blooms extend from the bloom at the top. At the bottom there are three red stamps.
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a s…
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a smaller brass knob. The bar attching the third leg continues straight back and bends at a right angle down to form another leg and forms the section that supports logs. The knobs unscrew from the legs and each andiron breaks down.
A large mountain rises up at left, a glacier spills down its face into the centre of the painting. Thin conifer trees are in the foreground. The sky is dark blue.
A large mountain rises up at left, a glacier spills down its face into the centre of the painting. Thin conifer trees are in the foreground. The sky is dark blue.
An ice floe fans out from top right, across centre, to left foreground. The mountain is in various colours with yellow dominant. Cloudy sky tlc and top.
An ice floe fans out from top right, across centre, to left foreground. The mountain is in various colours with yellow dominant. Cloudy sky tlc and top.
Two aneroid barometer-altimeters (a & b) labeled: “Keuffel & Esser Co. N.Y. MADE IN ENGLAND. Improved Surveying Aneroid Compensated” Black oxidized finish on the case. Altitude graduation up to 12,000 feet. Leather carrying cases contain comparative pressure test sheet dated 1903 and issued by Keuf…
Two aneroid barometer-altimeters (a & b) labeled: “Keuffel & Esser Co. N.Y. MADE IN ENGLAND. Improved Surveying Aneroid Compensated” Black oxidized finish on the case. Altitude graduation up to 12,000 feet. Leather carrying cases contain comparative pressure test sheet dated 1903 and issued by Keuffel & Esser.
A stylized dragon carved from white onyx. The dragon’s body is flat and slightly arched over a round disk base with a dragon's head at one end looking back over the body. There is an ornate raised relief carving on the body. The base is marked with (Chinese?) characters inside a square.
A stylized dragon carved from white onyx. The dragon’s body is flat and slightly arched over a round disk base with a dragon's head at one end looking back over the body. There is an ornate raised relief carving on the body. The base is marked with (Chinese?) characters inside a square.