Carboard Turtles Chocolates box with “LEICA STUFF” written on the lid in black marker. Inside the box are 11 adapter rings [made by Lecia, Kodak, and Enteco], a small rectangular Leica-Meter with a window showing a silver metal grid over a purple-blue filter [housed in a brown leather pouch], a Lei…
Carboard Turtles Chocolates box with “LEICA STUFF” written on the lid in black marker. Inside the box are 11 adapter rings [made by Lecia, Kodak, and Enteco], a small rectangular Leica-Meter with a window showing a silver metal grid over a purple-blue filter [housed in a brown leather pouch], a Leica-Meter camera attachment in its original red cardboard box, instruction manuals for the Leica-Meter attachment and the Leica M5, and an empty Kodak filter box. Some of the adapter rings are housed in cardboard Enteco or Kodak boxes while others are free-floating.
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to t…
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to the band, tip is crimped in stiff fold, 3 have solder at the tip to form a longer point. (MFG: Fitrite).(b) finger pick set (2.5 x 1.8 x 2.0) six metal rings that fit over the finger tips, adjustable band has circles cut out along it, flame shaped fingernail rises from band, curling inward slightly, and with cut out circle at middle. (mfg: National) (c) finger pick (2.5 x 1.9 x 2.0) as (b) but without cut out circles (mfg: Artisto) (d) finger picks (3.0 x 1.7 x 1.9) two metal bands that wrap around finger tip, widening near the end, then narrowing to a point that extends off to one side of the finger. (e) finger picks (3.5 x 1.5 x 1.9) two flat ivory bands which curl once around finger tip and extend out to one side in a point. (f) pick (3.2 x 2.3 x .1) small, flat, egg shaped, marbleized, grey plastic, stiff. (mfg: Durro). (g) pick (3.0 x 2.2 x .1) as (f) but brown tortoise shell coloured plastic (mfg: Eureka). (h) pick (2.7 x 1.9 x .1) as (f) but transparent yellowed plastic ?, slightly curled. (i) capo (5.3 x 1.9 x .9) flat metal bar with small hooks at either end to hold tightly coiled spring across the under side, lined underneath bar with cork. (mfg: Elton). j) bridge ? (4.7 x .8 x 1.1) a long, half round, hollow metal bar with six incised rings spaced evenly along the length. (mfg: Kamiki). (k) slides (7.2 x 1.7 diam) two heavy, solid, brass rods (used to slide over strings when playing the guitar Hawaiian style) (1) peg (5.0 x .9 x 2.3) white, cast plastic peg with long shaft and flattened key with finger depression each side, ferrules around top of shaft. (m) bridge (4.7 x 1.4 x 1.9) low, unfinished wood bridge with small dark support perpendicularly across under middle, short legs thicken slightly at base, series of small notches across top, some deliberately cut into wood, some worn in odd places from strings (mfg: Grover).
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, …
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, high, yellowed, glass like bridge with arced top, and arch under between legs, curved in at sides, and four shallow notches across top. (d) pegs (15.9 x .9 x 1.9) three plain, wooden tuning pegs with straight, tapering shafts, and simple round flat keys at top with depressions for fingers to grasp, small slit cut across bottom, impressed marks from strings around bottom. (e)pick guard (7.8 x 5.2) small, lyre shaped form cut from a thin sheet of tortoiseshell patterned plastic, two pinholes at stem where broken off from something else (a bracket?).
A collection of violin accessories: (a) tailpiece button (3.2 x 1.7 diam) - hard black wood peg with round button head and small dot of nacre inlaid at middle, stocky shaft. (b) peg (6.7 x 1.1 x 2.4) hard black wood peg with long tapering shaft and flattened, depressed, finger grip at end, small …
A collection of violin accessories: (a) tailpiece button (3.2 x 1.7 diam) - hard black wood peg with round button head and small dot of nacre inlaid at middle, stocky shaft. (b) peg (6.7 x 1.1 x 2.4) hard black wood peg with long tapering shaft and flattened, depressed, finger grip at end, small dot of nacre inlaid at middle of end, tiny hole drilled through shaft nearly halfway up. (c) peg (5.9 x .9 x 2.3) as (b) but slightly smaller, hole through shaft lowe. (d) bridge (4.7 x 3.9 x .5) cut out of unfinished wood with scrolled carving at sides around short legs and at middle, arched top with four shallow notches for strings. Marks: on side, "PANPI (TC monogram trademark)" (e) bridge (4.5 x 3.2 x .5) as (d). Marks: on side, "VUILL?TIME", penciled "10" (f) string package (5.5 x 5.4) white paper envelope holding "Muller's Eternelle First violin string" with accompanying product blurb printed in black, holds coiled catgut string with tiny yellow loop at one end (unused) (g) string package (7.3 x 7.2) cellophane envelope with paper label of same size slipped inside with slits cut to hold string, label printed in black with "The Bernhardt String made of silver steel (trademark)/ violin E", contains two coiled strings, 1 broken of catgut, and the other of very fine wire (e string) wrapped with yellow at one end, (unsure if string is original one of envelope, catgut string definitely not).
Pertains to information relating to cinematography including cameras, film, filters, colour, lenses, sound recordings, preservation, projection, exposure, shutter speed, screen time, care and handling of film, lighting, focus etc. and includes advertisements for equipment
Green metal audio announcer, used to play pre-recorded audio - usually advertisements - during broadcasts like radio programs. The announcer consists of a rectangular body with a black plastic handle at one short end, vent slats at the other, and speakers along both long sides. The top of the box f…
Green metal audio announcer, used to play pre-recorded audio - usually advertisements - during broadcasts like radio programs. The announcer consists of a rectangular body with a black plastic handle at one short end, vent slats at the other, and speakers along both long sides. The top of the box features the grey metal housing for the tape cartridge - which also has a plug for an external speaker - the power switch, volume control knob, outlet for a remote to be plugged in, and a brown plastic power cord. All of these features can be covered by a removable hinged lid that latches closed above the carry handle. Also contains the instruction manual.
Rectangular metal box with rubber knobs on the bottom to keep it off of tabletops, a 0-100 dial, pale yellow circular button, and red light on the top, and four different plugs across the two short sides - one side has one and the other has three. There is a circular hole in the bottom that allows …
Rectangular metal box with rubber knobs on the bottom to keep it off of tabletops, a 0-100 dial, pale yellow circular button, and red light on the top, and four different plugs across the two short sides - one side has one and the other has three. There is a circular hole in the bottom that allows some limited access to the interior, possibly a vent. Variable Autotransformers are used to control electrical voltage, power, and current so as to provide a safe and steady electrical feed to a device.