Sheepskin lined black brown leather Air Force jacket. 15 cm. wide sheepskin collar with two metal buckles and leather straps on leather underside to fasten collar in stand up position, full length metal zipper, center front. Bottom side buckles on each side for adjusting bottom width, right hand si…
Sheepskin lined black brown leather Air Force jacket. 15 cm. wide sheepskin collar with two metal buckles and leather straps on leather underside to fasten collar in stand up position, full length metal zipper, center front. Bottom side buckles on each side for adjusting bottom width, right hand side front pocket.
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails…
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails attached to centre by small metal arms. Face dial measured around perimeter with numbers from 0-90 has small circular dial at top with numbers from 0-9 and the letters "HDS" just above central pivot of small thin needle. Dial reads "Air meter to 1000 feet/No 508". Bottom of solid brass base has screw hole at centre to hold screw mount which is brass finger screw with black painted brass tube attached to top. Lever on side of meter halts needle. Box, plain square wooden box with brass hinges for lid is fitted with small blocks of wood to hold air meter securely in place. Mounting screw slips over arm of piece of wood fastened to lid. Paper label inside lid reads, "Correction for Air Meter No. 508/. Add 30 per minute to the observed reading of the Air Meter. Note. Each instrument is now regulated so as to reduce the correction to a constant quantity per minute, which must be added as in the example given.". Small brass latch hook closes lid.
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a s…
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a smaller brass knob. The bar attching the third leg continues straight back and bends at a right angle down to form another leg and forms the section that supports logs. The knobs unscrew from the legs and each andiron breaks down.
Circular barometer mounted on plain, rectangular, plywood backing for wall mounting. "Air guide barometer compensated" on face, also "Made in USA by Fee and Stemwedel Inc. Chicago". Dial shows pressure in inches and millibars, as well as "rain change fair" indicators. Casing of brass has four s…
Circular barometer mounted on plain, rectangular, plywood backing for wall mounting. "Air guide barometer compensated" on face, also "Made in USA by Fee and Stemwedel Inc. Chicago". Dial shows pressure in inches and millibars, as well as "rain change fair" indicators. Casing of brass has four screw mounts at rim. Manual red needle can be set for comparison of day to day readings, black needle for humidity readings immovable.
A stylized dragon carved from white onyx. The dragon’s body is flat and slightly arched over a round disk base with a dragon's head at one end looking back over the body. There is an ornate raised relief carving on the body. The base is marked with (Chinese?) characters inside a square.
A stylized dragon carved from white onyx. The dragon’s body is flat and slightly arched over a round disk base with a dragon's head at one end looking back over the body. There is an ornate raised relief carving on the body. The base is marked with (Chinese?) characters inside a square.
A stylized French poodle sitting with it nose in the air, wearing a flat hat on its head and a large black bow tie studded with rhinestones. The figurine is white touched with gold on the curls, and there is a red line mouth and black eyes with eyelashes. The bottom is marked “An Enterprise Excl…
A stylized French poodle sitting with it nose in the air, wearing a flat hat on its head and a large black bow tie studded with rhinestones. The figurine is white touched with gold on the curls, and there is a red line mouth and black eyes with eyelashes. The bottom is marked “An Enterprise Exclusive KB 2607 ESD.”
Three grey mice, one large and two small, with pink ears and black dot eyes and noses. a) The largest and most detailed mouse sits on its hind quarters. b) A small mouse lying on all fours with its tail stretched straight out behind.c) A small mouse sitting on its hind quarters with its tail stretc…
Three grey mice, one large and two small, with pink ears and black dot eyes and noses. a) The largest and most detailed mouse sits on its hind quarters. b) A small mouse lying on all fours with its tail stretched straight out behind.c) A small mouse sitting on its hind quarters with its tail stretched straight out behind.
Two skunk figurines.a) A small figurine of a skunk with its tail standing up. The figurine is black with a wide white stripe down the back and with a black patch on the crown. The skunk has a red nose and black dot eyes with eyelashes. b) A figurine of a skunk with its tail curving down and a po…
3.5 (a); 5.5 (b) x 2.3 (a); 1.8 (b) x 3.5 (a); 2.5 (b) cm
Description
Two skunk figurines.a) A small figurine of a skunk with its tail standing up. The figurine is black with a wide white stripe down the back and with a black patch on the crown. The skunk has a red nose and black dot eyes with eyelashes. b) A figurine of a skunk with its tail curving down and a pointed snout. The skunk is white with a narrow black line on each side and along curve of tail. The figurine has black dot eyes.