A long black academic gown with long wide pointed sleeves gathered at the shoulders. The gown opens down the length of the gown front, with a wide panel on either side, and snaps to fasten at the top creating a V-neck. The back of the gown is gathered between the shoulders with a square 'collar' …
A long black academic gown with long wide pointed sleeves gathered at the shoulders. The gown opens down the length of the gown front, with a wide panel on either side, and snaps to fasten at the top creating a V-neck. The back of the gown is gathered between the shoulders with a square 'collar' at the yoke and a line of twisted cording down centre that buttons at the bottom of the yoke. The monogram “P.A.M.” is sewn on a label at the neck. There is also a manufacturer’s label at the neck.
A gold-coloured academic gown gathered at the yoke and sleeves. The gown has a wide curving neck and front opening that are banded with black satin. There are three black satin bands along edges of the wide, long, pointed sleeves. The gown fastens at the front of the neck with hooks and a narro…
A gold-coloured academic gown gathered at the yoke and sleeves. The gown has a wide curving neck and front opening that are banded with black satin. There are three black satin bands along edges of the wide, long, pointed sleeves. The gown fastens at the front of the neck with hooks and a narrow ribbon tie.
A black academic hood that has a sleeve shape at the end. The deep hood is lined with orange silk and black silk in wide bands. The hood is edged in light grey velvet which forms a strap to pass over the shoulders and rest on the chest.
A black academic hood that has a sleeve shape at the end. The deep hood is lined with orange silk and black silk in wide bands. The hood is edged in light grey velvet which forms a strap to pass over the shoulders and rest on the chest.
Red and gold academic hood, red velvet border, 8cm. wide, fits over shoulders, main body hangs down back, lower edge is rounded. Outside is solid gold colour, inside is red with two gold bands, each 14 cm. wide. An arc is cut into center seam to create a deep pocket, 29.5 x 15.5 x 21cm. tag insid…
Red and gold academic hood, red velvet border, 8cm. wide, fits over shoulders, main body hangs down back, lower edge is rounded. Outside is solid gold colour, inside is red with two gold bands, each 14 cm. wide. An arc is cut into center seam to create a deep pocket, 29.5 x 15.5 x 21cm. tag inside pocket reads "09595 year "74 code 63 for Univ. of Calgary Hr. Dr. Hd. Sainthill Levine". Hood is contained in a black nylon zippered pouch, 34 x 40cm.
(a) Plastic pennant is triangular shape 20.0 at widest part, red with white writing: "du Maurier International". Stitched on to long thin wooden rod. (b) Light green fibre pennant with white trim and printing: "World Cup Skiing Bank of Montreal International Mount Norquay, Canada" (c) Same as (b) …
(a) Plastic pennant is triangular shape 20.0 at widest part, red with white writing: "du Maurier International". Stitched on to long thin wooden rod. (b) Light green fibre pennant with white trim and printing: "World Cup Skiing Bank of Montreal International Mount Norquay, Canada" (c) Same as (b) except pennant colour is red.
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails…
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails attached to centre by small metal arms. Face dial measured around perimeter with numbers from 0-90 has small circular dial at top with numbers from 0-9 and the letters "HDS" just above central pivot of small thin needle. Dial reads "Air meter to 1000 feet/No 508". Bottom of solid brass base has screw hole at centre to hold screw mount which is brass finger screw with black painted brass tube attached to top. Lever on side of meter halts needle. Box, plain square wooden box with brass hinges for lid is fitted with small blocks of wood to hold air meter securely in place. Mounting screw slips over arm of piece of wood fastened to lid. Paper label inside lid reads, "Correction for Air Meter No. 508/. Add 30 per minute to the observed reading of the Air Meter. Note. Each instrument is now regulated so as to reduce the correction to a constant quantity per minute, which must be added as in the example given.". Small brass latch hook closes lid.
Round blown glass alcohol lamp with lid (a,b). Three triangular metal pieces with round holders, may be for candles as there is dripped wax on them (c,d,e).
Round blown glass alcohol lamp with lid (a,b). Three triangular metal pieces with round holders, may be for candles as there is dripped wax on them (c,d,e).
Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
Rossignol Concorde alpine skis with bindings. Black plastic skis with metal edges "Rossignol Concorde and Rossignollogo" on front, rooster logo at top. Rossignol and shield behind binding "made in France" Gertsch metal binding "Made in Switzerland" adjustable toe and heel. Yellow nylon rope wit…
Rossignol Concorde alpine skis with bindings. Black plastic skis with metal edges "Rossignol Concorde and Rossignollogo" on front, rooster logo at top. Rossignol and shield behind binding "made in France" Gertsch metal binding "Made in Switzerland" adjustable toe and heel. Yellow nylon rope with snap ca 66.0 long looped on each outside heel.
Alpine racing skis with aluminum poles (a,b) pair skis 220.0x7.0, red, orange and yellow stripes along full length. "HEAD" across top 6.8x41.0. "CANADA" behind bindings 2.3x41.8. On side "220 DH12642". "LOOK" bindings, swivel heel, adjustable screws for toe and heel. LOOK made in France. (c,d…
Alpine racing skis with aluminum poles (a,b) pair skis 220.0x7.0, red, orange and yellow stripes along full length. "HEAD" across top 6.8x41.0. "CANADA" behind bindings 2.3x41.8. On side "220 DH12642". "LOOK" bindings, swivel heel, adjustable screws for toe and heel. LOOK made in France. (c,d) ski poles: 122.0 long, metal basket 11.0 dia. rubber supports. "SCOTT USA SUN VALLEY" embossed on rubber. Plastic handgrips 13.5 long with leather loops. 10.5 wide paper label on shaft: "World Cup Skiing" "Bank of Montreal International", below that another label stylized "S", scratched onto pole "VIKING" ("Viking" is the nickname of RoyAndersen.)
Pair yellow Arnsteiner alpine skis with bindings. Plastic skis, steel edges around top and at heel. "Blizzard" logo near tip. Black round 3.8 dia. "epoxi glasfiber ski" "Standard" in front o fbinding "ARNSTEINER PIESEN SLALOM" behind bindings "MARKER". Toe swivels, heel clamp on flexible cable…
Pair yellow Arnsteiner alpine skis with bindings. Plastic skis, steel edges around top and at heel. "Blizzard" logo near tip. Black round 3.8 dia. "epoxi glasfiber ski" "Standard" in front o fbinding "ARNSTEINER PIESEN SLALOM" behind bindings "MARKER". Toe swivels, heel clamp on flexible cable. Leather strap 79.0 long attaches to buckle other side.
Pair of Head racing skies. Laminated with steel edges. Silver coloured with red manufacturer's name and stripe. Metal cable bindings "Securus-Ramy" made in France. Bindings have been changed from alpine downhill to touring.
Pair of Head racing skies. Laminated with steel edges. Silver coloured with red manufacturer's name and stripe. Metal cable bindings "Securus-Ramy" made in France. Bindings have been changed from alpine downhill to touring.
Pair alpine "Head" skis with skins. Black, steel edges "Head Vector 205B 12795", steel and chrome bindings. "Securus-Ramy made in France, Brev. SGDG Brev.+" Aluminum heel locator "Ramy made in France". Cable findings screwed on to sides, coiled binding with red rubber at heel. Skins 174.0 long,…
Pair alpine "Head" skis with skins. Black, steel edges "Head Vector 205B 12795", steel and chrome bindings. "Securus-Ramy made in France, Brev. SGDG Brev.+" Aluminum heel locator "Ramy made in France". Cable findings screwed on to sides, coiled binding with red rubber at heel. Skins 174.0 long, metal fastener at toe with fabric strap looped around toe of ski. 3 groups of 4 rivets attach skins to skis.
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
Circular pouch with two straps with buckskin ties. Green white triangular beading on straps, pouch white "Queen's Crown" beaded on green ground is on front face of cotton lined pouch. Backside of pouch beaded with silver at edge, star in middle and surrounding V shapes, all on red ground. Backside…
Circular pouch with two straps with buckskin ties. Green white triangular beading on straps, pouch white "Queen's Crown" beaded on green ground is on front face of cotton lined pouch. Backside of pouch beaded with silver at edge, star in middle and surrounding V shapes, all on red ground. Backside of pouch beaded on canvas and front side beaded on buckskin. Fringe tassels of silver beads on lower two thirds of pouch edge.
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a s…
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a smaller brass knob. The bar attching the third leg continues straight back and bends at a right angle down to form another leg and forms the section that supports logs. The knobs unscrew from the legs and each andiron breaks down.
Two aneroid barometer-altimeters (a & b) labeled: “Keuffel & Esser Co. N.Y. MADE IN ENGLAND. Improved Surveying Aneroid Compensated” Black oxidized finish on the case. Altitude graduation up to 12,000 feet. Leather carrying cases contain comparative pressure test sheet dated 1903 and issued by Keuf…
Two aneroid barometer-altimeters (a & b) labeled: “Keuffel & Esser Co. N.Y. MADE IN ENGLAND. Improved Surveying Aneroid Compensated” Black oxidized finish on the case. Altitude graduation up to 12,000 feet. Leather carrying cases contain comparative pressure test sheet dated 1903 and issued by Keuffel & Esser.
Barometer in brass casing with brass suspension loop at top. "AJL & Co." over "B" (representing Boston) within oval on casing back. Dial shows pressure range of 26 to 31 inches. Indicators such as "stormy rain change fair very dry". Also "Made in England for Andrew J. LLoyd & Co. Boston". "Aneroid…
Barometer in brass casing with brass suspension loop at top. "AJL & Co." over "B" (representing Boston) within oval on casing back. Dial shows pressure range of 26 to 31 inches. Indicators such as "stormy rain change fair very dry". Also "Made in England for Andrew J. LLoyd & Co. Boston". "Aneroid barometer". Blue needle fluctuates with pressure and brass needle is manual needle which can be moved daily and compared with following day's reading. Manual needle movable on face. Screw adjustment on back of barometer adjusts blue needle to local conditions.
A carved plaster bear sitting upright with forelegs crossed between spread hind legs and head facing to one side. The bear is painted brown with white muzzle and bib at chest. The bear is sitting on a round green grass patch. The figurine is attached to a base of thin round wood that has been pa…
A carved plaster bear sitting upright with forelegs crossed between spread hind legs and head facing to one side. The bear is painted brown with white muzzle and bib at chest. The bear is sitting on a round green grass patch. The figurine is attached to a base of thin round wood that has been painted dark brown. The bottom is marked “For Pearl Moore HAL.”