A long black academic gown with long wide pointed sleeves gathered at the shoulders. The gown opens down the length of the gown front, with a wide panel on either side, and snaps to fasten at the top creating a V-neck. The back of the gown is gathered between the shoulders with a square 'collar' …
A long black academic gown with long wide pointed sleeves gathered at the shoulders. The gown opens down the length of the gown front, with a wide panel on either side, and snaps to fasten at the top creating a V-neck. The back of the gown is gathered between the shoulders with a square 'collar' at the yoke and a line of twisted cording down centre that buttons at the bottom of the yoke. The monogram “P.A.M.” is sewn on a label at the neck. There is also a manufacturer’s label at the neck.
A gold-coloured academic gown gathered at the yoke and sleeves. The gown has a wide curving neck and front opening that are banded with black satin. There are three black satin bands along edges of the wide, long, pointed sleeves. The gown fastens at the front of the neck with hooks and a narro…
A gold-coloured academic gown gathered at the yoke and sleeves. The gown has a wide curving neck and front opening that are banded with black satin. There are three black satin bands along edges of the wide, long, pointed sleeves. The gown fastens at the front of the neck with hooks and a narrow ribbon tie.
A black academic hood that has a sleeve shape at the end. The deep hood is lined with orange silk and black silk in wide bands. The hood is edged in light grey velvet which forms a strap to pass over the shoulders and rest on the chest.
A black academic hood that has a sleeve shape at the end. The deep hood is lined with orange silk and black silk in wide bands. The hood is edged in light grey velvet which forms a strap to pass over the shoulders and rest on the chest.
Light wooden plaque with simulated rolled paper top and bottom has a rectangular copper coloured metal plaque centered. Inscribed "Banff Lake Louise Chamber of Commerce wishes to honor Mrs. Ann Boon for many years of outstanding dedication and service to the Chamber of Commerce, the community of …
Light wooden plaque with simulated rolled paper top and bottom has a rectangular copper coloured metal plaque centered. Inscribed "Banff Lake Louise Chamber of Commerce wishes to honor Mrs. Ann Boon for many years of outstanding dedication and service to the Chamber of Commerce, the community of Banff, and the tourist industry.
Light coloured wooden plaque with simulated paper scrolls top and bottom. Centered near top is the Al Azhar Temple crest in gold, red and green coloured metals. Copper coloured plate, 16.0x15.2, is on the face and inscribed "Presented to Noble Forest H. (Pop) Kidney In recognition of his many yea…
Light coloured wooden plaque with simulated paper scrolls top and bottom. Centered near top is the Al Azhar Temple crest in gold, red and green coloured metals. Copper coloured plate, 16.0x15.2, is on the face and inscribed "Presented to Noble Forest H. (Pop) Kidney In recognition of his many years service to Al Azhar Temple Illustrious Potentate George H. Ingram 1978.
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails…
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails attached to centre by small metal arms. Face dial measured around perimeter with numbers from 0-90 has small circular dial at top with numbers from 0-9 and the letters "HDS" just above central pivot of small thin needle. Dial reads "Air meter to 1000 feet/No 508". Bottom of solid brass base has screw hole at centre to hold screw mount which is brass finger screw with black painted brass tube attached to top. Lever on side of meter halts needle. Box, plain square wooden box with brass hinges for lid is fitted with small blocks of wood to hold air meter securely in place. Mounting screw slips over arm of piece of wood fastened to lid. Paper label inside lid reads, "Correction for Air Meter No. 508/. Add 30 per minute to the observed reading of the Air Meter. Note. Each instrument is now regulated so as to reduce the correction to a constant quantity per minute, which must be added as in the example given.". Small brass latch hook closes lid.
Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
Green downhill skis with a red base. Made in Japan "Kazama". Bindings "Tyrolia". A lot of duct tape holding the skis together. Rounded tips on both ends useful for photographing.
Green downhill skis with a red base. Made in Japan "Kazama". Bindings "Tyrolia". A lot of duct tape holding the skis together. Rounded tips on both ends useful for photographing.
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a s…
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a smaller brass knob. The bar attching the third leg continues straight back and bends at a right angle down to form another leg and forms the section that supports logs. The knobs unscrew from the legs and each andiron breaks down.
Two aneroid barometer-altimeters (a & b) labeled: “Keuffel & Esser Co. N.Y. MADE IN ENGLAND. Improved Surveying Aneroid Compensated” Black oxidized finish on the case. Altitude graduation up to 12,000 feet. Leather carrying cases contain comparative pressure test sheet dated 1903 and issued by Keuf…
Two aneroid barometer-altimeters (a & b) labeled: “Keuffel & Esser Co. N.Y. MADE IN ENGLAND. Improved Surveying Aneroid Compensated” Black oxidized finish on the case. Altitude graduation up to 12,000 feet. Leather carrying cases contain comparative pressure test sheet dated 1903 and issued by Keuffel & Esser.
A carved plaster bear walking across the top of a log base. The bear is painted black with a white muzzle,and the head is turned to one side. The bottom is marked “To Pearl Moore from Hal Bieler 71.”
A carved plaster bear walking across the top of a log base. The bear is painted black with a white muzzle,and the head is turned to one side. The bottom is marked “To Pearl Moore from Hal Bieler 71.”
A stylized dragon carved from white onyx. The dragon’s body is flat and slightly arched over a round disk base with a dragon's head at one end looking back over the body. There is an ornate raised relief carving on the body. The base is marked with (Chinese?) characters inside a square.
A stylized dragon carved from white onyx. The dragon’s body is flat and slightly arched over a round disk base with a dragon's head at one end looking back over the body. There is an ornate raised relief carving on the body. The base is marked with (Chinese?) characters inside a square.
A realistic representation of a bulldog that is white with grey at the muzzle, toes and along its back. The dog has a black nose and eyes and a collar with a buckle at the neck. The bottom is marked “Made in England Royal Doulton Bone China Hn 1973.”
A realistic representation of a bulldog that is white with grey at the muzzle, toes and along its back. The dog has a black nose and eyes and a collar with a buckle at the neck. The bottom is marked “Made in England Royal Doulton Bone China Hn 1973.”
A carved plaster squirrel standing on its hind legs with its front paws held to its mouth. The squirrel is painted grey with a black eye outlined in yellow. The squirrel is attached to a round tree section with bark. The bottom is marked with a maker’s mark, the letters “HAL” joined together, an…
5.5; 3.0 (base) x 3.8; 6.2 (base) x 7.2; 6.2 (base) cm
Description
A carved plaster squirrel standing on its hind legs with its front paws held to its mouth. The squirrel is painted grey with a black eye outlined in yellow. The squirrel is attached to a round tree section with bark. The bottom is marked with a maker’s mark, the letters “HAL” joined together, and “70.”
Four wooden monkeys seated on flat, rectangular base. The first three monkeys represent respectively, Speak No, Hear No, and See No Evil. The last monkey is also seated with hands in crotch. Varnished wood. Each monkey is anchored by a peg in base and is also glued to same.
Four wooden monkeys seated on flat, rectangular base. The first three monkeys represent respectively, Speak No, Hear No, and See No Evil. The last monkey is also seated with hands in crotch. Varnished wood. Each monkey is anchored by a peg in base and is also glued to same.
(a) is a hollowed out, red bean into which rests a stopper in the form of an ivory elephant. Inside the beans lie approximately 100 very miniature elephants enclosed in cellophane. Enclosed in small cardboard box. (b) many very miniature elephants and 1 larger elephant stopper like in (a).
(a) is a hollowed out, red bean into which rests a stopper in the form of an ivory elephant. Inside the beans lie approximately 100 very miniature elephants enclosed in cellophane. Enclosed in small cardboard box. (b) many very miniature elephants and 1 larger elephant stopper like in (a).
Three hand carved elephants, two in red brown wood and one in medium brown wood. All have ivory tusks and inset eyes and are in a walking position with trunks hanging to ground.
Three hand carved elephants, two in red brown wood and one in medium brown wood. All have ivory tusks and inset eyes and are in a walking position with trunks hanging to ground.
Bamboo musical instrument made of two hollow bamboo tubes suspended on split bamboo frame of three thin upright sticks supported in holes cut in hollow bamboo tube at bottom. Two flat pieces of bamboo are secured crosswise into the split uprights and each holds one of the bamboo tubes which are hun…
Bamboo musical instrument made of two hollow bamboo tubes suspended on split bamboo frame of three thin upright sticks supported in holes cut in hollow bamboo tube at bottom. Two flat pieces of bamboo are secured crosswise into the split uprights and each holds one of the bamboo tubes which are hung on them by a semicircular hole which fits into a notch on the crosspiece, half of the upper part of these tubes have been cut away lengthwise and at their bottom two small legs have been carved which fit into wells cut in the bamboo tube at the bottom. When the instrument is held by one of the uprights and shaken, the hollow bamboo clappers strike the sides of this well and make a musical sound.